COMICA VM30 2.4G Super Cardioid Condenser Wireless Shotgun Microphone User Manual

COMICA VM30 2.4G Super Cardioid Condenser Wireless Shotgun Microphone

Specifications:

• Model : VM30
• Type : Super Cardioid Condenser Wireless Shotgun Microphone
• Frequency : 2.4G

Product Information:
The COMICA VM30 is a high-quality 2.4G Super Cardioid Condenser Wireless Shotgun Microphone designed to provide clear and crisp audio recordings. With its super-cardioid pickup pattern, it effectively captures sound in front of the microphone while minimizing background noise.

Product Usage Instructions

1. Setup:
   Before using the VM30 microphone, ensure that the battery is fully charged. Attach the microphone to your camera or recording device using the provided mounting accessories.

2. Power On:
   To power on the microphone, press and hold the power button for a few seconds until the indicator light turns on.

3. Adjust Settings:
   Adjust the microphone sensitivity and gain settings according to your recording environment for optimal audio quality.

4. Recording:
   Position the microphone towards the sound source you want to capture. Maintain a suitable distance between the microphone and the subject for clear audio recording.

5. Monitoring:
   Use headphones connected to your recording device to monitor the audio levels in real time while recording with the VM30 microphone.

Foreword
Thanks for purchasing COMICA VM30 2.4G Super Cardioid Condenser Wireless Shotgun Microphone

Main Features

• Groundbreaking Shotgun Microphone with Integrated Wireless Module
• Support Wired/Wireless Dual Modes for One-button Switch
• 48kHz/24bit Super Cardioid Recording, Broadcasting-level Sound Quality
• Digital/Analog Output, Universal for Camera, Smartphone, Computer
• Intelligent Auto-sensing 3.5mm Output and Power Switch
• 75/150Hz Two Low-cut Filter Modes, High-frequency Boost
• Support Gain Control, Safety Mode, Real-time Monitor and Muting
• OLED Screen for Monitoring and Visual Operation
• Built-in Rechargeable Lithium Battery, Support Charging While Using
• Battery Life Up to 38H in Wired Mode, Up to 14H in Wireless Mode
• Low Latency<20ms, Wireless Working Range Up to 100m (Open Area)
• Full Metal Material, Super-shielding, Stable and Durable

Notice

• When it needs to be used for a long time, it can be connected to the external power to realize charging while using. AC/DC power is not supported to avoid noise problem Don’t block the antenna position to avoid any poor signal generated
• In wireless mode, for a better recording effect, please adjust the gain of the shotgun mic first. After the shotgun mic is adjusted to the maximum gain level, then adjust the gain of the receiver accordingly
• This product belongs to high-precision instruments, please avoid falling, collision or pounding
• Do not use this equipment in the vicinity of heat sources or interference sources, such as radiator, oven, refrigerator or air conditioner
• If the pick-up distance is close or when used outdoors, please put on the windmuff to prevent sound burst or reduce wind noise
• Do not use the equipment in rain or in a damp environment to avoid short-circuit danger

Packing List

Components and Instruction

Shotgun Microphone(Transmitter)

1. Mic Capsule
2. Low Cut Indicator: The corresponding indicator lights up blue when turned on
3. High-frequency Boost Indicator: Blue light on when turned on
4. Modes Switch Button: Short press to switch between 75/150Hz low-cut and high-frequency boost functions; Long press to turn on Safety Mode (Safety Mode is only available in wired mode)
5. Working Indicator: Green light on in wired mode; In wireless mode, blue light flashes when paring, and blue light on when paired
6. RF Button: In wireless mode, long press to turn on/off microphone; in wired mode, long press to turn on/off wireless mode
7. Gain Control Knob: Rotate to adjust microphone gain
8. Pairing Hole: When the wireless connection is abnormal, use the pin to short-press the pairing hole to repair
9. 3.5mm Output Port: To identify TRS/TRRS plug automatically and output analog audio through the 3.5mm TRS-TRS/TRRS-TRRS audio cable
10. USB-C Charging/Output Port: P lug in the 2 in 1 charging&output cable to charge or output digital audio

Screen Display Instruction：

Receiver

1. 3.5mm Monitoring Port: Plug in 3.5mm TRS/TRRS headphones for monitoring
2. 3.5mm Output Port: To identify TRS/TRRS plug automatically and output analog audio through the 3.5mm TRS-TRS/TRRS-TRRS audio cable
3. USB-C Charging/Output Port: To charge or output digital audio with the 2 in 1 charging&output cable
4. Reset Hole: If there is an abnormal phenomenon such as the device is crash or unable to turn on it, then insert the reset pin into the reset hole to reset it
5. Power/Mute Button: Long press to power on/off; Short press to turn on/off the mute function
6. Gain Control/Screen Flip/Pairing Buttons: Short press to adjust the gain; Long press to flip the screen; Long press the two buttons in sync to enter pairing state
7. Belt Clip

Screen Display Instruction：

Installation and Usage

Wired Mode
3.5mm Analog Output
Connect the shotgun microphone to the camera/smartphone/computer through the 3.5mm audio cable, or connect to the camcorder/recorder through the 3.5mm TRS- XLR audio cable

1. TRRS-TRRS audio cable for cameras/smartphones/computers, TRS-TRS audio cable for some cameras not compatible with TRRS-TRRS audio cable, TRS-XLR audio cable for recorders/camcorders. Please purchase a TRS-XLR audio cable with a chip
2. VM30 can not automatically switch on/off when used on devices with an XLR interface. Users need to long press the RF button to turn on/off the microphone manually

USB Digital Output
Connect the shotgun microphone to the smartphone or computer through the 2 in 1 charging&output cable and related OTG audio adapter cable

1. It’s recommended to insert the USB end with the magnetic ring into the microphone and connect the other end to the smartphone/computer
2. When using with Lightning interface devices, please purchase a USB-Lightning adapter/cable that supports the OTG function

Wireless Mode

Connection
Paired (The Shotgun Microphone and receiver are paired by default at the factory)

1. Long press the RF button of the shotgun microphone to turn it on and enter wireless mode;
2. Turn on the receiver by long pressing the power button, and then long press the two pairing buttons in sync to enter the pairing state.

Unpaired (Re-pairing is required when the connection fails. Please follow the method below)

1. Keep the shotgun microphone and receiver within 1m range
2.  Short-press the shotgun microphone’s pairing hole with the equipped pin, making it enter the wireless pairing state. Before pairing, the indicator light flashes blue
3. When pairing, the wireless icon on the screen turns into a paired icon; when paired, the indicator light keeps blue on

Usage

Shotgun Microphone(Transmitter)
Use with arm stands, boom poles, and tripods

Receiver
3.5mm Analog Output
Connect the receiver to the camera/smartphone/computer through the 3.5mm audio cable, or connect to the camcorder/recorder through the 3.5mm TRS-XLR audio cable; Monitoring according to individual needs

TRRS-TRRS audio cable for cameras/smartphones/computers, TRS-TRS audio cable for some cameras that are not compatible with TRRS-TRRS audio cable, TRS-XLR audio cable for recorders/camcorders. Please purchase a TRS-XLR audio cable with a chip

USB Digital Output
Connect the receiver to the smartphone/computer through the 2 in 1 charging&output cable and related OTG audio adapter cable

1. It’s recommended to insert the USB end with the magnetic ring into the receiver and connect the other end to the smartphone/computer
2. When using Lightning interface devices, please purchase a USB-Lightning adapter/cable that supports the OTG function

Specifications

QR CODE

• Website: comica-audio.com
• Facebook: Comica Audio Tech Global
• Instagram: Comica Audio
• YouTube: Comica Audio

The COMICA LOGO is a trademark which is registered and owned by Commlite Technology Co., Ltd

Email : [email protected]

FAQ

Q: How do I charge the VM30 microphone?
A: The VM30 microphone can be charged using the provided USB cable connected to a power source such as a computer or a USB wall adapter.

Q: Can I use the VM30 microphone with smartphones?
A: Yes, you can use the VM30 microphone with smartphones that support external microphones via the appropriate adapter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>