BELEP COLGANTES Round Lamp PerLighting Instructions
- June 14, 2024
- BELEP
Table of Contents
BELEP COLGANTES Round Lamp PerLighting
Product Information
Specifications
- Model: Pendant Lamp
- Color: Various
- Weight: Varies by model
- Power Source: Electric
- Protection Class: Class I or Class II
- Installation: Indoor use only
Product Usage Instructions
Safety Instructions
Before proceeding with the installation or use of this pendant lamp, please
ensure to read and follow all safety instructions provided in the manual.
Installation
- Ensure that electrical connections are carried out by qualified personnel only.
- Follow the provided fixture label for technical data reference.
- Mount the lamp on a suitable fixing system based on its weight.
- Connect wires according to color coding: PE or = green/yellow = ground wire, N = blue = neutral wire, L = brown (black) = phase.
- Avoid installation on easily flammable or damp surfaces.
Maintenance
Regular maintenance is limited to cleaning outer surfaces, shades, and
protective glass with a soft cloth. Do not use any cleaning agents on gold or
brass finishing lamps.
Bulb Replacement
If needed, ensure to always use the correct type of bulb as indicated on the
label. LED systems in the lamp cannot be replaced.
FAQ (Frequently Asked Questions)
-
Q: How should I clean the lamp?
A: Clean the outer surfaces, shades, and protective glass with a soft cloth. Avoid using any cleaning agents, especially on gold or brass finishing lamps. -
Q: What should I do if the wiring is damaged during installation?
A: If the wiring is damaged, do not proceed with installation. Contact a qualified professional to assess and repair the wiring before use.
Installation Instruction
Wiring
CONNECTION TO THE NETWORK
Technical data: see fixture label
SAFETY INSTRUCTIONS
- Electrical appliances must only be connected by qualified persons.
- Important! Before starting installation work disconnect the main cable from the power supply – remove the fuse or turn the switch to «OFF». The power supply connection must be done with a suitable connecting box, as seen in the illustrations.
- The lamps with an index of protection 20 (IP20) cannot be used outdoors.
- Lamps marked with the symbol may not be installed on easily flammable surfaces such as wood, or carpet.
- Do not attach the lamp to surfaces that are damp, freshly painted, or otherwise electrically conductive.
- Connect the wires of the lamp with the same color as the wires of the wall or the cell. PE or = green/yellow = ground wire. N =blue=neutral wire. L=brown (black) = phase.
- Use the fixation system according to the weight of the lamp.
- Keep away the wires and connections from heat sources.
- Make sure that the wiring is not damaged during de drilling/fixing procedure.
- Be sure to always use the correct type of bulb (see information on the label!).
- Keep these instructions in a safe place.
- Use the sleeves to cover the main supply wiring to the fitting.
- Cleaning is limited to the outer surfaces, shades or protective glass, reflectors, and covers. It is important to ensure that no moisture enters the terminal compartment or reaches any live parts! Gold and brass finishing lamps can be cleaned only with a soft cloth (do not use cleaning agents of any kind).
- Use low-pressure halogen lamps with low ultraviolet radiation (UV-STOP).
- Suitable only for indoor use, at 25ºC.
EXPLANATION OF PROTECTION CLASSES
- Protection class I: This lamp has an earth terminal. The earth wire (yellow and green) must be connected to the terminal indicated by the symbol.
- Protection class II: This lamp is double insulated and must not be connected to earth wire.
- All the technologic LED lamps are constructed with LED systems that cannot be replaced.
STAMP OF THE COMPANY
The manufacturer guarantees the proper functioning of this equipment, repairs, or spare parts of the model owing to faulty manufacture during 3 years after the surrender date. Responsibility will not be accepted, however, for damages or injury caused through misuse, For any claims the sale ticket must be presented. The company agrees to repair any defect or malfunction found in the item and any damages said defect or malfunction might directly provoke. If the repair should fail to satisfy the customer and/or the object fails to present the optimum condition for the use to which it is destined the guarantee holder will have the right to the substitution of the acquired item for another of identical characteristics or a complete refund of purchase price.
PRODUCTO FABRICADO EN ESPAÑA
C.I.F B-96498233 Camino Valencia, 104. 46190 RIBA-ROJA DEL TÚRIA (Valencia – España)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>