V-TAC 80133970 Wi-Fi Module For Solar Inverter Instruction Manual

V-TAC 80133970 Wi-Fi Module For Solar Inverter

INTRODUCTION

Thank you for selecting and buying V-TAC Product. V-TAC will serve youthe best. Please read these instructions carefully & keep this user manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.

User Manual QR CODE

Please scan the QR code to access the manual in multiple languages.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.

This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.

NOTICE:
Please read this manual carefully before using products and keep it in the place where O&M providers can easily find.

Due to product upgrade and other factors, the content of this manual might change from time to time. Please take actual product as standard and get latest manual from www.vtacexports.com or sales. Unless otherwise agreed herein, this manual will only be used as guidance. Any statement, information or suggestion in this manual will not take any form of responsibility.

Without written permission, any content of this document (partly or entirely) cannot be extracted, copied or transmitted in any form by any company or individual.

DOWNLOAD APP

|
---|---

SOLARMAN Smart
Energy Assi stant Around you

|

SOLARMAN Business
One-Stop O&M, After Service Management So~ware

IOS: Search “Solarman Smart” or “Solarman Business” in Apple Store. Android: Search “Solarman Smart” or “Solarman Business” in Google Play

WIFI MODULE INSTALLATION

Type 1
Step1:   Assemble WIFI Module to the inverter communication interface as shown in the diagram.

Warning:
Please do not hold the WIFI Module body to rotate while install or remove the Module.

WIFI MODULE STATUS

Check Indicator light

Lights| Implication| Status Description(All lights are single green lights.)
---|---|---
| Communication with router|

1. Light off: Connection to the router failed.
2. On 1s/Off 1s(Slow flash): Connection to the router succeeded. 3.Light keeps on: Connection to the server succeeded.
3. On 100ms/Off 100ms(Fast flash): Distributing network fast.

| Communication with inverter|

1. Light keeps on: WIFI Module connected to the inverter. 2.Light off: Connection to the inverter failed.
2. On 1s/Off 1s(Slow flash): Communicating with inverter.

| WIFI Module running status|

1. Light off: Running abnormally.
2. On 1s/Off 1s (Slow flash): Running normally.
3. On 100ms/Off 100ms(Fast flash): Restore factory settings.

The normal operation status of the WIFI Module, when router connected to the network normally:

1. Connection to the server succeeded: NET light keeps on after the WIFI Module powered on.
2. WIFI Module running normally: READY light flashes.
3. Connection to the inverter succeeded: COM light keeps on.

ABNORMAL STATE PROCESSING

If the data on platform is abnormal when the WIFI Module is running, please check the table below and according to the status of indicator lights to complete a simple troubleshooting. If it still can not be resolved or indicator lights status do not show in the table below, please contact Customer Support.
(Note: Please using the following table query after power-on for 2mins at least.)

NET| COM| READY| Fault Description| Fault Cause| Solution
---|---|---|---|---|---
| |
Any state| OFF| Slow flash| Communication with inverter abnormal|

1. Connection betw- een WIFI Module and inverter loosen.
2. Inverter does not match with WIFI Module’s communication rate.

|

1. Check the connection between WIFI Module and inverter. Remove the WIFI Module and install again. 2.Check inverter’s communication rate to see if it matches with WIFI Module’s.
2. Long press Reset button for 5s, reboot WIFI Module.

OFF| ON| Slow flash| Connection between logger and router abnormal|

1. WIFI Module does not have a network.
2. Antenna abnormal
3. Router WiFi signal strength weak.

|

1. Check if the wireless network configured.
2. Check the antenna, if there is any damage or loose.
3. Enhance router WiFi signal strength.
4. Long press Reset button for 10s, reboot WIFI Module and networking again.

Slow flash| ON| Slow flash| Connection between WIFI Module and router normal, connection between logger and remote server abnormal.|

1. Router networking abnormal.
2. The server point WIFI of Module is modified. 3.Network limitation, server cannot be
3. connected.

|

1.  Check if the router has access to the network.
2. Check the router’s setting, if the connection is limited.
3. Contact our customer service.

OFF| OFF| OFF| Power supply abnormal|

1. Connection betw- een WIFI Module & inverter loosen or abnormal.
2. Inverter power – insufficient.
3. WIFI Module –
4. abnormal.

|

1. Check the connection, remove the WIFI Module and install again.
2. Check inverter output power. 3.Contact our customer service.

Fast flash| Any state| Any state| SMARTLINK networking status| Normal|

1. Exit automatically after 5mins.
2. Long press Reset button for 5s, reboot WIFI Module.
3. Long press Reset button for 10s, restore factory settings.

Any state| Any state| Fast flash| Restore factory settings| Normal|

1. Exit automatically after 1mins.
2. Long press Reset button for 5s,
3. boot WIFI Module.
4. Long press Reset button for 10s, restore factory settings.

USAGE METHODS AND NOTICES FOR RESET BUTTON

Usage methods and key-press descriptions for Reset button

100ms.
Long press 5s| Reboo ng the WIFI Module.| All lights are ex nguished immediately.
Long press 10s| WIFI Module.| 1. All lights are ex nguished a er 4s.

2. READY light ashes fast for 100ms.

NOTICES FOR RESET BUTTON

Notice:
Do not remove waterproof plug

USER MANUAL FOR SOLARMAN SMART APP

1. Registration Go to VTAC Smart HOME and register. Click “Register” and create your account he
   

2. Create a Plant Click “Add Now” to create your plant. Please fill in plant basic info and other info here.
   

3. Add a Logger Method 1: Enter logger SN manually.
   Method 2: Click the icon in the right and scan to enter logger SN You can find logger SN in the external packaging or on the logger body.
   

4. Network Configuration After the logger is added, please configure the network to ensure normal operation.
   Go to “Plant Details”-“Device List”, find the target SN and click “Networking”.
   

Step 1： Confirm Wi-Fi Info Please make sure your phone has connected to the right WiFi network. And click “Start”.
Notice: 5G WiFi is not supported .

Step 2： Connect to AP network Click “Go to connect” and find the right “AP_XXXXX” network (XXXXX Refers to logger SN).
If the password is required, you can find the password on the logger body. Go back to VTAC Smart HOME APP, after connecting to AP network.

Step 3 ：Auto ConfigurationPlease wait for a while to complete the configuration. Then system will switch to the following page.
Click “Done” to check plant data. (Usually, the data will be updated in 10mins)

If configuration failure occurs, please check the following reason and try it again.

1.  Make sure WLAN is ON.
2. Make sure WiFi is normal.
3. Make sure wireless router does not implement the white-black list.
4. Remove the special characters in Wi-Fi network.
5. Shorten the distance between the phone and device.
6.  Try to connect to other Wi-Fi.

Warning:
Please make sure the WIFI Module is working properly before you leave the site. If there is anything abnormal,please do not leave the site and contact customer service: support@v-tac.eu.

References

• TAC.EU
• Leading Lighting Manufacturer & Supplier | V-TAC | V-TAC UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>