VIP002W USER MANUAL

Dear customer

Thank you for purchasing our product. Please read this user manual carefully and keep it for further reference.

Packing List

1. Wireless Gaming Headset xl
2. Wireless Transmitter box xl
3. USB Charging Cable xl
4. 3.5 Audio Cable xl

Instruction

• Volume knob button
• Multi-function button

• Press and hold for three seconds to turn on / off;

• Short press to switch the sound effect mode: A beep sounds for the game mode; Two beeps sound for music mode.

• Mic mute + pairing button
• Status indication light

• When the headset is not connected to the wireless transmitter box, the charging indicator will continue to flash;

• When the headset is connected to the wireless transmitter box, the charging indicator is always on.

• Charging port

• Plug the charging cable in when the headset is turned on, the headset will turn off automatically.

• 3.5 Audio Jack port

• After the audio cable is inserted into the headset, the wireless headset will switch to a wired headset.

• Microphone indication light
• Light color knob button

• Turn clockwise to the end, the light will automatically change color.

• Wireless Transmitter indicating light

• When the headset is not connected to the transmitter box, the indicator light will continue to flash;

• The indicator light is always on when the headset is connected to the transmitter box.

• Wireless Transmitter box port

Connection Method

• PS4 connection setting

1. Insert the USB Transmitter directly into the USB jack on the PS4 game console, and then long press the power button of the headset to turn on the device. After the connection is successful, proceed to the next step.

2. PS4 host audio output settings: select “Settings-Peripheral Devices-Audio Devices-Output to Headphones-All Audio” on the menu page.

• XBOX ONE connection setting

1. Connect the wireless headset to the XBOX ONE controller using the matching 3.5 audio cable. (After the audio cable is inserted into the headset, the wireless headset will be switched to a wired headset, and the power button of the headset will not be available)

• Computer connection setting

1. Insert the USB Transmitter directly into the USB jack on the computer, and then long press the power button of the headset to turn on the device. After the connection is successful, proceed to the next step
2. Computer audio output setting: select “Playback device-2.4G Wireless Headphone-set as default device”
3. Click “Record-2.4G Wireless Headphone-Set as default device”

• Wired connection
  A device with a 3.5 audio jack can be connected via a 3.5 audio cable

Specifications

Wireless Headphone
Continuous working hours: 6h
Charging hours:., 3h
Frequency range: 2.402-2.480GHz
Latency: 24mS
Transmission power: -5dBm
Transmission distance: 10m
Receiving sensitivity: -82d B
Speaker diameter: 40mm
Speaker impedance: 16
Speaker frequency response: 20~20KHz
Microphone specification: 4.0*1.Smm
Microphone frequency response: -42土3dB
Microphone direction: OMNI DIRECTIONAL
Wireless Transmitter box
Device name: 2.4G Wireless Headphone
Working voltage: SV
Latency: 24mS
Transmission power: -SdBm
Transmission distance: 10m
Receiving sensitivity: -82d B

FCC Caution.
(1)§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Changes or modification warning Any Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which
  the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>