Shenzhen Huanxiang Technology Co Ltd 2BGMT-H1 Portable Projector User Guide
- June 12, 2024
- Shenzhen Huanxiang Technology Co Ltd
Table of Contents
Shenzhen Huanxiang Technology Co Ltd 2BGMT-H1 Portable Projector
Product Information
Specifications:
- Projection Size & Distance:
- Screen size indication (inches): 4, 3inch, inch, inch, inch, inch, inch
- Screen size W x H (M): 0.96M, 0.53M, M, M, M, M, M
- Projection distance (M): 1.38M, 1.77M, 2.08M, 2.67M, 2.97M, 3.53M
- Screen size (diagonal)
- Power input jack
- IR AV in Audio out
- LAN USB HD IN
- Menu
- Source Left
- Power
- OK Exit Right
- Exit Input Source
Product Usage Instructions
Cautions:
Before using the projector, read the user manual thoroughly and keep it for
future reference.
Components:
Check if all components in the package are present. Contact the distributor
in case of any missing items.
- Projector
- Remote control
- Power cable
- User guide
Warnings and Safety Instructions:
Do not expose the unit to rain or moisture to prevent fire or electric
shock. Maintain at least a 30cm space between the projector and surrounding
objects for performance and reliability.
Installation:
To optimize viewing experience:
- Place the projector on a flat horizontal surface.
- Avoid poorly ventilated, hot, humid, dusty, and smoky areas.
- Do not block ventilation holes.
- Avoid direct exposure to strong light to protect eyes.
- Ceiling Mount: Use thread hole on the four corners at the bottom for ceiling mounting.
Note:
- Change projection mode when suspended or in rear projection state.
- Avoid installing near temperature/smoke sensors or air conditioner airflows.
FAQ:
-
Q: How can I prevent machine failure due to condensation or temperature rise?
A: Avoid installing the projector in places directly blown by cold and warm air from an air conditioner. -
Q: What should I do if there are missing items in the package?
A: Contact the distributor to reissue any omitted components.
Before using the projector, please read this user manual carefully and keep it for future use.
SAFETY CAUTIONS
- Be sure to use the standard power adapter of the device, as improper use of the power supply can cause serious damage to the device.
- If you do not use the device for a long time, please ensure that the power is turned off.
- Please avoid foreign matters entering or blocking the fan outlet to avoid affecting the fan operation.
- Please do not directly power off or shut down the device while it is in working condition.
- When connecting external devices with high power consumption, please confirm whether the power consumption can be supported.
- Do not attempt to repair this product yourself. If the product or its power supply experiences any malfunction or damage, cease use immediately and contact the distributor for support.
- This sign warns the user that there is voltage inside the unit that has not been insulated, which may cause surface magnetic fields and cause electric shock. Therefore, it is very dangerous to come into contact with the internal components of the unit.
WARNING To prevent fire or electric shock, do not expose this unit to rain or moisture.
COMPONENTS
Please check whether the contents of the package are complete. If there are any omissions, please contact the distributor to reissue.
ATTENTION
The following safety instructions ensure that this function maintains a
long service life and prevents fire or electric shock.
CAUTIONS
- To maintain the performance and reliability of the projector, please leave at least 30 centimeters of space between the projector and surrounding objects.
- Do not look directly at the light emitted by the projector. Direct exposure to strong light can harm your eyes and cause serious consequences.
INSTALLATION
In order to achieve a better viewing experience, we recommend that you choose the following installation method.
OVERVIEW
DEVICES
REMOTE CONTROL
Projection Size & Distance
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>