RAWMC SA-SL01 Wireless Gaming Mouse User Guide

RAWMC SA-SL01 Wireless Gaming Mouse

Thank you very much for purchasing the RAWM SA-SL01 wireless gaming mouse. We hope it will bring you a new operating experience. To obtain more enhanced settings and functions, you can download the driver software from the official website.

Technical Parameters

• Brand: RAWM
• Product model: SA-SL01
• Transmission method: USB wired + 2.4G wireless + Bluetooth wireless
• Interface type: Type-C interface
• Product size: 118mm61.32mm38.4mm
• Shell material: ABS injection moulding
• Number of buttons: 7 buttons + 1 switch + 1 mode selection
• Wire length: 2M
• Sensor: PAW3395
• Resolution: 26000DPI
• Maximum acceleration: 50G
• Maximum speed: 650IPS
• Supported systems: WindowsVista/XP/7/8/10/11Mac

Key Function Description

1. Left button 2Right button Middle button (scroll wheel button)
   • Forward button 5Back button
2. Check the battery capacity
   The green light indicates that the battery is sufficient; the yellow light indicates that it needs to be charged; and the red light indicates that it needs to be charged as soon as possible.

Power on

1. ON gear: Dial right to the ON gear, that is, the power is turned on.
2. OFF gear: Dial left to the OFF gear, that is, the power is turned off.

DPI switch button

• Adjustable six levels of DPI: The default DPI is 1600 [yellow].
• (The DPI value can be customized and adjusted in the driver software)
• Switching indicator light: 400(blue)/800(green)/1600(yellow)/3200(red).

Description

1. Left button

2. Right button

3. Middle button (scroll wheel button)

4. Forward button

5. Back button

6. Check the battery capacity
   The green light indicates that the battery is sufficient; the yellow light indicates that it needs to be charged; and the red light indicates that it needs to be charged as soon as possible.

7. Power on

8. ON gear: Dial right to the ON gear, that is, the power is turned on.

9. OFF gear: Dial left to the OFF gear, that is, the power is turned off.

10. DPI switch button

    • Adjustable six levels of DPI: The default DPI is 1600 (yellow).
    • (The DPI value can be customized and adjusted in the driver software)
    • Switching indicator light: 400(blue)/800(green)/ 1600 (yellow) /3200(red).

11. Bluetooth/2.4G switch

Low Power Mode

1. Low power state: the indicator light of the mouse is flashing (red light).
2. Charging state: the indicator light of the mouse is always on (red light).
3. State when fully charged: the indicator light of the mouse is always on (green light).

Sleep Mode

1. Level 1 sleep state: 10 seconds after the mouse stops moving, the mouse enters the power-saving sleep state, and the mouse can be woken up by moving/pressing keys.
2. Level 2 sleep state: After the mouse stops moving for 1 minute, the mouse enters the power-saving sleep state.Moving/pressing a button can wake up the mouse.

Restore Factory Settings
Press and hold the DPI button and turn the power switch back to the ON position. If the indicator light (blue light) lights up again, it means that the mouse has been restored to factory default settings.

Product Warranty
Thank you for your trust and support for RAWM products. To allow you to use this product with confidence and better protect your rights and interests, our company will strictly abide by and implement relevant regulations and provide after-sales service.

1. Service validity period: Quality guarantee for 12 months from the date of purchase.
2. Service content: Provide services by the liability regulations for repair, replacement and return of microcomputer products.
3. Does not belong to the scope of service:
   • The effective service or free maintenance period has expired.
   • Failure or damage caused by failure to use, maintain and store by the correct instructions.
   • Failure or damage caused by repairs not authorized by our company;
   • Products without dealer information and seal on the warranty card, altering the contents of the Three Guarantees Voucher without authorization.
   • Product defects caused by force majeure (such as natural disasters, etc.).
   • Product defects are caused by human factors (such as operating errors, bumps, inappropriate voltage input, etc.).
   • Other failures or damages not caused by product design, technology, manufacturing, quality and other issues.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in porlable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>