2024PENGPLUS Solar Robotic Pool Skimmer

Product Information

Specifications

• Structure: Solar Robotic Pool Skimmer
• Model: HVIN: Peng Plus
• Dimensions: 663453193mm
• Net Weight: 6kg
• Charging Port Input: TYPE-C
• Rated Power: To be determined
• Rated Voltage: To be determined

Product Usage Instructions

Safety Statement

Please read the following safety instructions and follow all
usual safety precautions before using this product. Any operation
inconsistent with this instruction manual may cause damage to the
product.

Host and Accessories Related Safety Precautions

• Warning: Do not disassemble, repair, or modify
  the machine yourself to avoid damage and danger.

• Warning: Do not use the product in
  environments with fire or explosion risks.

• Warning: Do not stand or sit on the product to
  prevent damage or falls.

Product Composition

The product consists of various parts including flip open
button, solar panels, trash basket detection port, power switch,
rear LED light, guide wheel, impeller, front LED light, TYPE-C
charging port seal cover, anti-kara rod, ultrasonic obstacle
avoidance sensor, propeller motor, and more.

Battery Removal

To remove the battery, follow the steps outlined in the manual
that involve unscrewing specific components of the product to
safely access and remove the battery.

FAQ

How do I connect the APP to the Solar Robotic Pool

Skimmer?

To connect the APP to the skimmer, please refer to section 3.2
in the user manual for detailed instructions on establishing a
connection via the designated application.

What should I do if the garbage basket is full?

If the garbage basket is full, make sure to empty it before
using the machine to ensure optimal performance and efficiency.

Solar Robotic Pool Skimmer
HVIN: Peng Plus
User M anual
(Note: Please read this m anual carefully before use to avoid danger or dam age to the product due to im proper operation)

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

cat alo g ue
1. Safety statement 2. Product description
2.1 Part nam e 2.2 Product param eter 3. Instructions for use 3.1 Operation guide 3.2 APP connection 3.3 Product m aintenance 4. Common Faults 5. Replaceable modules

Safety statement
Please read the following safety instructions and follow all usual safety precautions before using this product Please read this manual carefully and keep this manual Any operation inconsistent with this instruction manual may cause damage to the product
Host and accessories related safety precautions
warn 01. Do not disassemble, repair or modify the machine yourself, otherwise it will damage the product
and cause danger. 02. Do not use this product in an environment where there is a possibility of fire or explosion. 03. Do not stand or sit on the product or it may cause damage to the product or fall.
Look out 01. When the garbage basket is full, please empty the garbage before using the machine. 02. The use temperature range of this product is 0 degrees Celsius to 40 degrees Celsius, do not
use in high or low temperature environment. 03. This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. 04. Please remove the battery from the machine before scrapping the product. When removing the battery, please ensure that the product is not connected to the power supply. 05. The recycled batteries are centrally placed in the battery recycling bins or harmful garbage bins set up in communities, hotels, schools, large shopping malls, supermarkets, etc., and collected by professional recycling agencies. Waste product batteries must be removed and discarded in accordance with local laws and regulations. 06. If not used for a long time, please turn off the power switch and recharge regularly. 07. This appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance. 08. This appliance contains batteries that are only replaceable by skilled persons.
1

Safety statement
How to remove the battery
Remove the six screws on the bottom cover and remove the bottom cover. Remove 52 screws from the left and right shell assembly and the front shell assembly, then remove 8 screws from the motor assembly on both sides, and finally remove 12 screws from the battery assembly and remove the battery assembly. Remove the screws from the battery compartment and remove the battery.
Bottom cover

Left shell assembly Front shell assembly Right shell assembly

Battery assembly Motor assembly

Battery Battery holder

2

Product composition
2.1Part name

1.Flip open button 4.Power switch

2.Solar panels 5.Rear LED light

3.Trash basket detection port 6.Guide wheel

1
2 3 4 5 1.Fliptop 2.Trash basket 3.Guide wheel 4.impeller 5.Front LED light
3

Product composition

1 2

1.TYPE-C- charging port seal cover 3.Anti-kara rod

2.Ultrasonic obstacle avoidance sensor 4.Propeller motor

4

Product composition
2.2Product parameters

Structure

Dimensions of the main unit Net weight of the main unit

663453193mm 6kg

Electronic

Charging port input Rated power Rated voltage
Battery rated capacity Typical battery capacity
Type C charging time

5V 2A 3W 7.2V 4800mAh 5100mAh 5.5h

Accessory

Trash basket capacity Basket size

4.5L 305245135mm

5

Instructions for use
3.1Operational Guidelines
Press the flip open button before use to check that the trash basket is in place.
Tie rod catch
There is a boundary anti-kara rod around the bottom of the machine, if the water surface of the pool is close to the level of the pool shore, you need to press tie rod catch and pull out the tie rod. The machine needs to be placed gently on the water. It should not be thrown or dropped as this will cause the machine’s solar panels to pop off.
6

Instructions for use
Turn on the power switch of the machine, the machine will turn on the green indicator light, and the machine will start to work forward automatically within 3 to 5 seconds. Automatically avoid turning when encountering obstacles ahead. In the outdoor scene, when the power is less than 20%, the machine automatically finds the area with strong sunlight intensity, suspends the previous work for charging, and the machine will automatically continue to work when the power is charged to 30%. When the ambient light intensity is insufficient, the machine defaults to night and will stop working to enter sleep mode. When the ambient light intensity is sufficient, the machine will automatically wake up and start working automatically.
The machine works in an outdoor setting with 100% of its electricity coming from solar energy. In summer, the machine can be fully used for daytime work by converting solar energy into electricity. In the winter, the machine needs more time to charge, which will reduce the working time. The machine works in indoor scenarios and needs to be charged with a 5V 2A adapter. Before charging make sure that the machine Type C charging port is free of water stains, turn counterclockwise to open the charging cover, and connect the Type C charging cable. While charging,the machine will stop working. Please keep the power switch on during charging. After charging, be sure to tighten the charge cover clockwise.
7

Instructions for use
LED indicator
01. When the APP remote control machine turns, the green light flashes quickly. 02. When the machine automatically cleans the pool, the green light flashes slowly. 03. Breathing flashes red when garbage basket is full. 04. Flash the red light when the machine power is low. 05. When the machine is charging type C, the red light flashes slowly. Turn off the lights when
the charge is full. 06. When the machine is faulty, the red light is steady on. 07. When the machine is in standby state, it is steady green. Turn off the lights after sleep.
t ro ub lesho o t ing
When a foreign body clogs the impeller or propeller, resulting in a slow motor speed, the LED light on the machine will be steady red. The machine is in the stopped state, need to clean the blockage, switch the machine again to activate the machine. When the battery is low, the LED on the machine will flash red. The machine should be placed in a place with ambient light intensity for solar charging or type C charging. The ultrasonic sensor is dirty and water stained, which will affect the ranging, resulting in the machine constantly rotating in the working mode. Wipe the ultrasonic sensor clean with a towel and return to normal.
8

Instructions for use
3.2APP connection
APP settings
Scan QR code of Figure 1 then download and install “LIBOS HOME” APP or Search for LIBOS HOME on the App Store or Android App platforms. Then, download and install it.
Figure1 Open the “LIBOS HOME” App and log in. There are two ways to log in: by verification code or by password.
Sign in

Figure2
After logging in, click “+” in the upper right corner of Figure 3 to add equipment. Select “Pool Cleaner” and follow the instructions on the page to connect.
xxxxxxxxx

Figure3

Figure4

The final interface is subject to the actual product, thank you.
9

Instructions for use
Follow the page prom pts to turn on your device and keep it within range and turn on your phone’s Bluetooth. After confirm ing the com pletion of the above steps and the status of the device, click Next. Wait for the device to be bound.

Figure5

Figure6

After successful binding, you can control the device.

XXXX

Figure7

Figure8

10

Instructions for use
3.3Product maintenance
Press the flip open button to remove the trash basket.
Clean out the trash in the trash basket, clean it with water, and put it back into the machine. 11

Instructions for use
In order to ensure the efficiency of solar charging, it is necessary to regularly clean up dust, fallen leaves and other debris. The solar panel can be rinsed with water and wiped clean.
For ultrasonic sensors, dust should be cleaned regularly. If there is dirt and water stains, it will affect the distance measurement of the machine, causing the machine to keep rotating. Use a clean towel to wipe clean and return to normal.
12

Common Faults

Faults Description

Fau lt s

Possible Reasons

So lu t io n

Machine does not work

The power switch at the rear of the machine is not turned on
The machine is out of power or the power is not enough

Turn the power switch on
Please use the adapter to fully charge or put it under the sunlight to charge (the machine will work automatically after charging to 30%)

The machine triggers an alarm fault

According to the indicator status or APP prompts, troubleshooting

The waste basket is full, the light flashes red.

The machine needs to be switched on and off again to activate the machine after clearing the blockage

The machine is in non-automatic cleaning mode
The power switch at the rear of the machine is not turned on

Enter auto-cleaning mode in APP or switch on the machine again.
Turn the power switch on

The product

The charging plug of Type C cable

cannot be charged is not fully inserted

Outdoor sunlight is not enough

Please check whether the charging cable is plugged in properly
Please use the Type C adapter to charge the machine.

Machine rotates The ultrasonic sensor surface is

in place

dirty or excessively waterlogged

Please wipe the ultrasonic sensor with a towel

13

Replaceable modules

Flap assembly

connector

Rear shell assembly

Basket assembly Right shell assembly
Front shell assembly Guide wheel assembly

Bottom shell assembly

Anti-kara rod

PCBA module

Left shell assembly

14

IC Warning This device complies with Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil nedoit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IC RF Statement: When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Déclaration IC RF: Lors de l’utilisation du produit, maintenez une distance de 20 cm du corps pour garantir conformité aux exigences d’exposition aux RF.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>