Telbix SEGOVIA PE1-CH Segovia LED Pendant Light Installation Guide
- June 12, 2024
- Telbix
Table of Contents
Telbix SEGOVIA PE1-CH Segovia LED Pendant Light
Installation Instructions
IMPORTANT: Must be installed by a qualified electrical contractor. Install in accordance with AS/NZS3000.
Product Diagram
The diagram presents an electronic device with specific operational steps and indications:
- Section A: Shows an ‘OFF’ position with an arrow pointing downwards towards a series of switches, suggesting that these switches should be in the off position.
- Section B: Displays the internal mechanics of the device, highlighted with red lines and a circle indicating key components or areas for attention during installation or maintenance.
- Section C: Shows an ‘ON’ position with an arrow pointing upwards towards the series of switches, indicating that these switches should be turned on after installation or maintenance is completed.
Specifications
| Protection Class | IP20 |
|---|
- 240V~50Hz 1x5W LED
FAQ
- Who should install the SEGOVIA PE1?
- The device must be installed by a qualified electrical contractor.
- What standards should the installation comply with?
- Installation must comply with the AS/NZS3000 standards.
- What does IP20 mean in the specifications?
- IP20 is a protection class indicating that the device is protected against solid objects larger than 12mm but not protected against water.
Note: The product diagram also includes some incomprehensible characters “7_)[Y8-&%” which do not seem to convey any meaningful information and could be a misprint or error.
Read User Manual Online (PDF format)
Loading......