Telbix QUILO P40 Quilo Pendant Light 1Lt in Black and Smoke Instructions

June 1, 2024
Telbix

Telbix QUILO P40 Quilo Pendant Light 1Lt in Black and Smoke

Specifications

Parameter Specification
Power Supply 240V~50Hz
Bulb Type 1 x 25W E27 max.
Ingress Protection IP20
Installation Requirement Must be installed by a qualified electrical

contractor in accordance with AS/NZ3000
Note| GLOBE NOT INCLUDED

Installation Diagram Description

The installation diagram for QUILO P40 features seven key components, which are annotated and linked through lines indicating the assembly and wiring connections. Below is a description of the diagram:

  1. Ceiling mount bracket
  2. Wiring connection point to the mains
  3. Electrical wire leading to the lamp holder
  4. Adjustable supporting rod
  5. Connection of the supporting rod to the lamp housing
  6. Depiction of the light bulb (Note: Globe not included)
  7. Lamp housing with vertical fins

Telbix-QUILO-P40-Quilo-Pendant-Light-1Lt-in-Black-and-Smoke-
fig-1

IMPORTANT
Must be installed by a qualified electrical contractor. Install in accordance with AS/NZ3000

Additional instructions are shown, including:

  • Switching off the mains before installation (indicated by an image with “OFF” and a downward arrow)
  • Switching on the mains after installation (indicated by an image with “ON” and an upward arrow)

Important Notice
It is important to note that the QUILO P40 must be installed by a qualified electrical contractor. The installation must be carried out in accordance with AS/NZ3000 standards. The item is rated with an ingress protection of IP20, and it is specified that the globe for the light fixture is not included.

FAQ

What type of bulb is required for the QUILO P40?

The fixture requires 1 x 25W E27 bulb, which is not included with the purchase.

Can I install the QUILO P40 myself?

No, installation must be performed by a qualified electrical contractor in accordance with AS/NZ3000 standards.

What is the ingress protection rating of the QUILO P40?

The QUILO P40 has an ingress protection rating of IP20.

Is the bulb included with the light fixture?

No, the bulb is not included and must be purchased separately.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals