BOSS MRGB10W Inch Marine Audio Subwoofer Instruction Guide

BOSS MRGB10W Inch Marine Audio Subwoofer

INTRODUCTION

Congratulations on your purchase of the Boss Audio Phantom Subwoofer. Boss Audio takes great pride in producing products that sound great and stand up to the daily rigors applied by audio enthusiasts around the world.

TECHNICAL SUPPORT

If you need technical support with your Boss Audio product or have questions about its use, please contact us: 805.751.4853 www.bossaudio.com

WIRING OPTIONS

MULTIPLE SUBWOOFERS

ENCLOSURES

The MRGB10W is designed to work in a sealed or ported enclosure.

Since the woofer has a pole-vent, it needs a minimum clearance from the rear wall enclosure of 0.75″ (19 mm).
Below you will find the dimension to make the enclosure, it has been designed for maximum output while retaining great sound quality.
The dimensions have already accounted for the volume displacement of the subwoofer,  and using 0.75″ (19 mm) MDF. All dimensions are external.

ENCLOSURE DIMENSIONS

Sealed Dimensions

• Length (L) 17″ (432 mm)
• Width (W) 9″ (229 mm)
• Height (H) 12″ (305 mm)
• Cut-out Diameter 39″ (238.5 mm)
• Internal Volume 1ft3

Ported Dimensions

• Length (L) 24″ (610 mm)
• Width (W) 12″ (305 mm)
• Height (H) 12″ (305 mm)
• Cut-out Diameter 39″ (238.5 mm)
• Port Diameter 4″ (102 mm)
• Port Length 13″ (330 mm)
• Internal Volume 9ft3

WIRELESS REMOTE CONTROL FUNCTIONS

IMPORTANT NOTES ON BATTERY

• Observe correct polarity while inserting the battery. Replace only with the same type or equivalent type.
• Do not leave the battery under direct sunlight. This may cause fire, explosion or excessive heat.
• Do not recharge, dismantle or short circuit the battery or throw it into fire.
• Remove the battery from the remote control if not used for a long time.
• The remote control contains a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death.

PRODUCT SPECIFICATION

• Impedance Dual 2Ω
• Resonant Frequency 40 Hz
• QTS 68
• QMS 15
• QES 77
• VAS 96 f3 (27.1 L)
• XMAX (One-Way) 10 mm
• Sensitivity (1 W/ 1 m) 85 dB
• Peak Power Handling 800 W
• Mounting Depth 57″ (116 mm)
• Cut-out Diameter 39″ (238.5 mm)

FEATURES

• RGB Illumination – Use the included wireless remote to change colors. Control things like the speed, color, mode, brightness and more. It looks great, especially at night!
• Weatherproof – The MRGB10W has been outfitted with the latest weatherproofing techniques for protection against the elements

FAQs

How can I make my BOSS MRGB10W subwoofer sound better?****

Your subwoofer should be positioned facing outward into the rest of the room and within 8–12 inches of a wall for the best sound quality. Consider positioning your subwoofer in the room’s corner for even greater output, as this placement can greatly improve the overall sound.

What volume should a BOSS MRGB10W subwoofer be set at?****

The “normal” or “0 degrees” position is typically appropriate if the subwoofer is in the same plane as the front speakers. When the bass level matches that of your other speakers, adjust the volume or level.

How many BOSS MRGB10W subwoofers do I need in my boat?****

Many people mistakenly believe that having more than one subwoofer is unnecessary or undesirable because they don’t want “too much bass.” However, adding a second subwoofer will actually have the opposite effect, ensuring consistent audible performance and improving the listening experience regardless of the environment.

Where should you not put a BOSS MRGB10W subwoofer?****

The left and right front speakers should be 4 to 5 feet apart from the subwoofer. Consequently, my next piece of advice is to avoid placing the subwoofer in a corner. Undoubtedly, there are many benefits to corner placement, chief among them being that the sub will produce more bass with less distortion there.

What makes a BOSS MRGB10W subwoofer powerful?****

The subwoofer in question’s wattage determines its power; a higher wattage indicates a more potent subwoofer.

Can I leave my BOSS MRGB10W subwoofer on all the time?****

Yes, as long as your subwoofer includes an auto standby mode, you can leave it on constantly. Subwoofers that are in standby use less energy and last longer. Older subwoofers without this feature should be unplugged when not in use because heat created by electricity escaping causes the amplifier to become hotter than usual.

What makes a BOSS MRGB10W subwoofer hit harder?****

Your subwoofer can also receive small improvements to increase its impact. Replace the voice coil, the little cone in front of the subwoofer, or buy a new enclosure for the subwoofer. If you don’t want to put any effort into it, just play your music with medium bass while turning the volume all the way down.

How do you know if a BOSS MRGB10W subwoofer is too loud?****

When bass dominates all other sounds, it is too loud in terms of volume.

What happens if a BOSS MRGB10W subwoofer is underpowered?****

A subwoofer won’t be harmed by low power or low loudness, but distortion will. A sub’s worst enemy is a signal that is clipped. An underpowered subwoofer is destroyed by trying to increase the volume of a distorted signal, not by playing music loud enough.

Do BOSS MRGB10W subwoofers use a lot of electricity?****

The majority of subwoofers need between 150 and 1000 watts to recreate the sound they are receiving. Although the power can be raised by adding an amplifier, it is advisable to stick with speakers that only need around 20 watts if you only want something tiny and portable.

How do I calculate port size for BOSS MRGB10W subwoofer?****

The port’s area is measured in square inches, thus to figure the overall area, multiply the height by the breadth. The math for a port that is 4 inches high by 4 inches wide is 4 x 4= 16 in2.

What is the hole in a BOSS MRGB10W subwoofer for?****

When the woofer is put in a box, there is a stronger force opposing its movement. The resistance to movement increases as the box gets smaller. Punching a hole in the box is one method of releasing some of that pressure.

How long should you break in a BOSS MRGB10W subwoofer?****

We recommend a solid break in time of 20–24 hours. Overnight, you can set it up with a strong, clear signal. You are now prepared to install and continue your journey.

Can I connect BOSS MRGB10W subwoofer to pre out?****

Subwoofers have their own internal amplifier, so using a pre-out connection in this situation is frequently advantageous. They can also be used to expand your home theater’s channel lineup, though.

Do BOSS MRGB10W subwoofers affect battery?****

The battery drain caused by a subwoofer is the most frequent type of harm. Adding a subwoofer to your automobile puts additional demand on the electrical system. It takes a lot of power to create sound vibrations. Your battery is used to provide the power needed to run a subwoofer.

What happens if you overpower a BOSS MRGB10W subwoofer?****

Turning it up is nice, but doing so causes the sound to get distorted. In addition to sounding horrible, doing this repeatedly can harm your speakers and subwoofers.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>