Whirlpool W3F D634 Built In Dishwasher User Guide

Whirlpool W3F D634 Built In Dishwasher

Product Usage Instructions

Control Panel Overview:
The control panel of the dishwasher includes various buttons and indicator lights for different functions.

First Time Use:

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Position the funnel and fill the salt reservoir up to its edge.
3. Fill the salt reservoir with water for the first time.
4. Wipe any salt residue away and ensure the cap is screwed on tightly.

Filling the Rinse Aid Dispenser:
Rinse aid should be filled when the indicator light is lit. Do not pour rinse aid directly into the appliance tub.

Filling the Detergent Dispenser:
Open the detergent dispenser using the opening device. Introduce detergent into the dry dispenser only. Use the TABLET button for all-in-one detergents for best results.

Programs Table:

FAQ:

• Q: Can I use regular detergent instead of dishwasher detergent?
  A: No, using detergents not designed for dishwashers may cause malfunction or damage to the appliance.

• Q: How often should I refill the rinse aid dispenser?
  A: Refill the rinse aid dispenser when the indicator light in the control panel is lit.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete assistance, please register your appliance on: www.whirlpool.eu/register.

PLEASE SCAN THE QR CODE ON YOUR APPLIANCE IN ORDER TO HAVE MORE DETAILED INFORMATION:

CONTROL PANEL

1. On-Off/Reset button with indicator light
2. Program selection button with indicator light
3. Multizone button with indicator light / Key lock
4. Eco program indicator light
5. Key lock indicator light
6. Display
7. Program number and remaining time indicator
8. Tablet (Tab) indicator light
9. Closed water tap indicator light
10. Rinse Aid refill indicator light
11. Salt refill indicator light
12. Power Clean® button with indicator light / Tablet (Tab)
13. Delay button with indicator light
14. Start/Pause button with indicator light / Drain out

FIRST TIME USE

FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be filled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Position the funnel (see figure) and fill the salt reservoir right up to its edge (approximately 1 kg); it is not unusual for a little water to leak out.
3. Only the first time you do this: fill the salt reservoir with water.
4. Remove the funnel and wipe any salt residue away from the opening. Make sure the cap is screwed on tightly, so that no detergent can get into the container during the wash program (this could damage the water softener beyond repair).
   Whenever you need to add salt, it is mandatory to complete the procedure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control panel is lit. NEVER pour the rinse aid directly into the appliance tub.

FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the detergent into the dry dispenser D only. Place the amount of detergent for pre-washing directly inside the tub.
If all-in-one detergents are used, we recommend using the TABLET button, because it adjusts the program so that the best washing and drying results are always achieved.
Usage of detergent not designed for dishwashers may cause malfunction or damage to the appliance.

WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently preventing scale buildup on the heater, contributing also to better cleaning efficiency. This system regenerates itself with salt, therefore it is required to refill salt containers when empty.
The frequency of regeneration depends on water hardness level setting – regeneration takes place once per 6 Eco cycles with the water hardness level set to 3. The regeneration process starts in the final rinse and finishes in the drying phase before the cycle ends.

• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.

PROGRAMS TABLE

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.

1. Not all options can be used simultaneously.
2. Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.

• MULTIZONE – If there are not many dishes to be washed, a half-loading may be used in order to save water, electricity and detergent. By default, the appliance washes dishes in all racks.
• KEYLOCK – A long press (for 3 seconds) of the MULTIZONE button, will activate the KEYLOCK function. To deactivate the KEYLOCK, long press again.
• NaturalDry it is a convection drying system that automatically opens the door during/after the drying phase to ensure exceptional drying performance every day. The door opens at a temperature that is safe to your kitchen furniture.
• POWER CLEAN – Thanks to the additional power jets this option provides a more intensive and powerful wash in the lower rack, in the specific area. This option is recommended for washing pots and casseroles.
• TABLET (Tab)- If you use powder or liquid detergent, this option should be off.
• DELAY – The start of the program may be delayed for a period of time between 0:30 and 24 hours
  The DELAY function cannot be set once a wash cycle has been started.

LOADING THE RACKS

CAPACITY: 14 standard place-settings

CUTLERY BASKET
It is fitted with top grids for improved cutlery arrangement. It must only be positioned at the front of the lower rack. Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards or they must be positioned horizontally in the tip-up compartments on the upper rack.

POWER CLEAN®
Power Clean® uses the special water jets in the rear of the cavity to wash the highly dirty items. The lower rack has a Space Zone, a special pull-out support in the rear of the rack that can be used to support frying pans or baking pans in an upright position, thus taking up less space. Placing the pots/casseroles faced to the Power Clean® component please activate the POWER CLEAN® on the panel.

CLEANING AND MAINTENANCE

More information in the Daily Reference Guide on the website.

TROUBLESHOOTING

Please scan the QR code on your product in order to have more detailed information.

The dishwasher does not fill the water. Display shows:  and F6 , both On/Off and START/Pause LEDs are blinking rapidly.| No water in the water supply or the tap is closed.| Make sure there is water in the water supply or the tap running.
The inlet hose is bent.| Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher and reboot.
The sieve in the water inlet hose is clogged; it is necessary to clean it.| After having carried out the verification and cleaning, turn off and turn on the dishwasher and restart a new program.
The dishwasher finishes the cycle prematurely.

Display shows: F15 and both On/Off and START/Pause LEDs are blinking rapidly.

| Drain hose positioned too low or siphoning into home sewage system.| Check if end of drain hose is placed at correct height (see INSTALLATION). Check for siphoning into home sewage system, install air admittance valve if necessary.
Air in water supply.| Check water supply for leaks or other issues letting air inside.

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code on your product.
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product’s identification plate.

The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal.

References

• Whirlpool Docs
• Register | Whirlpool Europe

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>