AKG N9 HYBRID Audio Science Review Instruction Manual
- June 11, 2024
- AKG
Table of Contents
AKG N9 HYBRID Audio Science Review
Specifications
- Model: N9 HYBRID
- Driver size: 40 mm/1.57 Dynamic Driver
- Power supply: 5V 1A
- Max input power: 30 mW
- Weight: 281 g/ 0.62 lbs
- Battery type: Lithium-ion battery (1050 mAh/ 3.8V)
- Charging time: 3 hrs from empty
- Music playtime with BT on and ANC off: Up to 100 hrs
- Music playtime with BT on and ANC on: Up to 55 hrs
- Music playtime with 2.4G on and ANC off: Up to 85 hrs
- Music playtime with 2.4G on and ANC on: Up t 45 hrs
- Music playtime with AUX and ANC on: Up to 40 hrs
- Talk time with ANC on (BT): Up to 35 hrs
- Talk time with ANC on (2.4G): Up to 30 hrs
- Frequency response (Passive): 20 Hz – 40 kHz
Product Usage Instructions
WHAT’S IN THE BOX
The package includes the AKG N9 Hybrid headphones along with necessary cables and documentation.
APP
Enhance your listening experience by downloading the AKG Headphones app for more control and personalization.
POWER ON & CONNECT
To power on and connect the headphones:
- For Android devices, manually pair via Bluetooth settings.
- For Windows devices, use Microsoft Swift Pair feature.
MULTI-POINT CONNECTION
You can connect up to two devices simultaneously by selecting the AKG N9 Hybrid in the Bluetooth settings of each device.
FIRST-TIME SETUP ON PC
To set up on a PC, navigate to Sound Settings and select AKG N9 Hybrid as the default playback and recording device.
Go to “Sound Settings” -> “Sound Control Panel”. Then select “AKG N9 HYBRID” as the default device in the “Playback” and “Recording” tabs.
DUAL SOURCE SWITCHING
Easily switch between the 2.4GHz wireless connection and Bluetooth connectivity for seamless transitions.
CONTROLS
The headphones feature various controls including ANC, TalkThru, and more. Advanced controls are available through the AKG Headphones app.
- Available in Bluetooth mode only
** Enable advance controls by connecting your AKG N9 HYBRID to AKG Headphones app
AUTO PLAY/PAUSE
The headphones automatically pause playback when removed and resume when worn again.
WIRED LISTENING MODE
You can use the headphones in wired mode by connecting via the provided cable for uninterrupted listening.
SILENTNOW
VOICEAWARE
SMART TALK
DO MORE WITH THE APP
CHARGING
To charge the headphones, use the provided USB Type-C cable. Charging time is approximately 2 hours for a full charge.
FACTORY RESET
To perform a factory reset, press and hold the specified buttons for 5 seconds to restore the headphones to default settings.
LED BEHAVIORS
The LED indicators on the headphones provide visual cues for different states such as connectivity, battery status, and more.
TECH SPEC
- Model: N9 HYBRID
- Driver size: 40 mm/1.57″ Dynamic Driver
- Power supply: 5V 1A
- Max input power: 30 mW
- Weight: 281 g/ 0.62 lbs
- Battery type: Lithium-ion battery (1050 mAh/ 3.8V)
- Charging time: 3 hrs from empty
- Music playtime with BT on and ANC off: Up to 100 hrs
- Music playtime with BT on and ANC on: Up to 55 hrs
- Music playtime with 2.4G on and ANC off: Up to 85 hrs
- Music playtime with 2.4G on and ANC on: Up to 45 hrs
- Music playtime with AUX and ANC on: Up to 40 hrs
- Talk time with ANC on (BT): Up to 35 hrs
- Talk time with ANC on (2.4G): Up to 30 hrs
- Frequency response (Passive): 20 Hz – 40 kHz
- Frequency response (Active): 20 Hz – 40 kHz
- Microphone frequency response: 20 Hz – 16 kHz
- Impedance: 32 ohm
- Sensitivity: 98 dB SPL@1 kHz
- Maximum SPL: 95 dB
- Microphone sensitivity: -38 dBV/Pa@1 kHz
- Bluetooth version: V5.3
- Bluetooth profile version: A2DP V1.4, AVRCP V1.6.2, HFP V1.8
- Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power: <11 dBm
- Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
- 2.4GHz Wireless carrier frequency: 2.4 GHz – 2.4835 GHz
- 2.4GHz Wireless transmitter power: <9 dBm (EIRP)
- 2.4GHz Wireless modulation : GFSK
- Maximum operation temperature: 45°C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-AKGN9H) has also been tested against this SAR limit
According to this standard, the highest
SAR value reported during product certification for head use is 0.403 W/Kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain
a separation distance of 0mm between the user’s head and the back of the
headset. The use of belt clips, holsters and similar accessories shall not
contain metal parts in its assembly. Use of
accessories that do not meet these requirements may not comply with IC RF
exposure requirements and should be avoided.
IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-AKGN9HTM) has also been tested against this SAR limit
According to this standard, the
highest SAR value reported during product certification for body use is 0.154
W/Kg.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user›s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-AKGN9H
Body operation
The device was tested for typical bodily operations where the product was kept
with 5 mm distance attaching away from the body. Non-compliance with the above
restrictions may result in
violation of IC RF exposure guidelines. Use only the supplied or approved
antenna.
IC: 6132A-AKGN9HTM
Compliance Information on Ear Cup
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT
CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN
INCORRECT TYPE DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Headset (Model: N9 HYBRID)
Dongle (Model: N9HYBRIDTM)
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Product specifications and app screens are subject to change without notice.
Frequently Asked Questions
Q: How do I reset my headphones?
A: To reset the headphones, press and hold the specified buttons for 5 seconds until you see the reset confirmation.
Q: How do I check the battery status?
A: The LED indicators on the headphones will show different behaviors based on the battery level, such as low battery, charging, and fully charged states.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>