SMART Technologies Inc SMART Board QX-RX Series Stamp Instructions
- June 10, 2024
- SMART Technologies Inc
Table of Contents
SMART Technologies Inc SMART Board QX-RX Series Stamp
Product Specifications
- Model : SRX-1
- Display Type : SMART Board QX/RX Series Stamp
- Battery : Lithium AAA battery
- Regulatory Compliance : FCC, ISED, EU, UK
- Transmission Band : 2402 – 2483.5 MHz
- Maximum Transmit Power : 3.79 dBm (EIRP)
Product Usage Instructions
Certification and Compliance
Ensure the device complies with FCC, ISED, EU, and UK regulations and
standards.
Viewing Regulatory Information
- From the Home screen, select the Settings icon.
- Select About.
- Select Regulatory Information.
Hardware Environmental Compliance
Dispose of electronic equipment and batteries safely and in an
environmentally friendly manner. Follow local regulations for recycling.
Battery Handling
Recycle or dispose of the Lithium AAA battery properly to prevent harm to
the environment and human health.
Frequently Asked Questions (FAQ)
-
Q: How do I check the regulatory information of the SMART Board QX/RX Series Stamp?
- A: To view the regulatory information, navigate to Settings > About > Regulatory Information on the display.
-
Q: What should I do with the batteries in the SMART Board QX/RX Series Stamp?
- A: Ensure proper disposal or recycling of the Lithium AAA battery contained in the device to prevent environmental damage.
-
Q: Where can I find more compliance information about the product?
- A: Visit smarttech.com/compliance for detailed information on regulatory compliance and environmental standards.
Certification and Compliance
SMART Board QX/RX Series Stamp
Model: SRX-1
View an electronic version of the display’s regulatory information
You can view an electronic (e-label) version of the SMART Board QX or SMART
Board RX series display’s regulatory information from the display.
- From the Home screen, select the Settings icon .
- Select About.
- Select Regulatory Information.
Federal Communication Commission interference statement
- FCC
- Supplier’s Declaration of Conformity
- 47 CFR § 2.1077 Compliance Information Unique Identifier: SRX-1
- Responsible Party – U.S. Contact Information SMART Technologies Inc.
- 2401 4th Ave, 3rd Floor
- Seattle, WA 98121
- compliance@smarttech.com
Contains FCC ID: QCI-SRXMOD1
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
smarttech.com/kb/171941 1041480- Rev 01
Note
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Radiation exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
Innovation, Science and Economic Development Canada statement
Contains IC: 4302A-SRXMOD1
This device complies with RSS-247 of the Innovation, Science and Economic
Development Canada Rules. Operation is subject to the following two
conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation exposure statement
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
EU and UK Declaration of Conformity
Hereby, SMART Technologies ULC declares that the SRX-1 complies with Directive
2014/53/EU.
The full text of the EU and UK declaration of conformity is available at the
following Internet address:
smarttech.com/compliance
Warning
Operation of this equipment in a residential environment could cause radio
interference.
The frequency band and the maximum transmitted power in EU and UK are listed below:
| Transmitting Band (MHz) | Maximum Transmit Power |
|---|---|
| 2402 – 2483.5 | 3.79 dBm (EIRP) |
Hardware environmental compliance
SMART Technologies supports global efforts to ensure that electronic equipment
is manufactured, sold, and disposed of in a safe and environmentally friendly
manner.
Waste Electrical and Electronic Equipment (WEEE)
Electrical and electronic equipment and batteries contain substances that can
be harmful to the environment and to human health. The crossed-out wheeled bin
symbol indicates that products should be disposed of in the appropriate
recycling stream and not as regular waste.
Batteries
The SMART Board QX/RX Series Stamp contains Lithium AAA battery. Recycle or
dispose of batteries properly.
More information
See smarttech.com/compliance for more
information.