HAMPTON BAY 2416J2-1 24 feet Commercial Light String Kit User Guide

: June 8, 2024
: HAMPTON BAY

Table of Contents

Introduction
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
Warranty
- WHAT IS COVERED
- WHAT IS NOT COVERED
PACKAGE CONTENTS
Installation
- Preparing For Installation
Installing Bulbs
- Suspending The Light String
User Servicing Instructions
Troubleshooting
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HAMPTON BAY 2416J2-1 24 feet Commercial Light String Kit

Introduction

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Safety Information

For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electrical shock, fire, or other injuries that could be hazardous or even fatal.
Before touching any wire, use a voltage tester to make sure it is not live.
Use tools with insulated handles and ladders made of wood or fiberglass.
To protect children, place a safety cover over any unused outlets.
Keep combustible material clear of bulbs. DO NOT allow the bulbs or sockets to come into contact with walls, ceilings, or fabrics associated with shades, blinds or other materials.
NOT intended for installation in ceilings, soffits, cabinets or other enclosed spaces.
DO NOT submerge under water.
NOT intended for lighting aquariums.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
Do NOT mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
Do NOT secure the wiring of the product with staples or nails, or place on sharp hooks or nails, install only using the mounting means provided.
Do NOT let lamps rest on the supply cord or on any wire.
Do NOT use this product for other than its intended use.
Do NOT hang objects from cord, wire, light string or lamps.
Do NOT close doors or windows on the product or extension cords as this may damage the wire insulation.
Do NOT cover the product with cloth, paper or any material not part of the product when in use.
This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do NOT use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug.
This product is intended for all-year use.
Always unplug this product before installing or replacing lamps
For outdoor use only.
This is an electric product not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
Do NOT place near standing areas of water, such as ponds and pools.
This string light is rated Max.1.1A Max. 132W, do NOT overload. Connect other string lights end-to-end up to a maximum of 1440 Watts total.
Insert the load fitting cover in the cord connector when not in use.
Risk of Fire. Keep lamps away from any combustible surface.
Replace only with the same type 11-Watt Max medium(E26) base lamp.
Read and follow all instructions that are on the product or provided with the product.

DANGER: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.

IMPORTANT: All bulbs must be OUTDOOR rated. Use of improperly rated bulbs can result in electric shock, fire, product and/or damage to , property, or injury to self.

DO NOT use any bulb over 11 watts.
DO NOT exceed the maximum number of 10 light strings when connecting multiple strings.
DO NOT exceed the maximum total capacity of 1440 watts.
Calculate the total load by adding up the wattages used in each of the 12 sockets X the number of light strings

IMPORTANT: The maximum distance to the receptacle is determined by the length of the cord provided and appropriate extension cord if used.

IMPORTANT: The maximum distance between interconnected units is determined by the length of the cord provided and appropriate extension cord if used.

CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
If you have any non-electrical questions about this fixture, please call our Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Please reference your Item (1006-695-149) or Model (2416J2-1).

Warranty

TWO (2) YEAR WARRANTY FOR THE UNIT, NINETY (90) DAY WARRANTY FOR THE BULBS

WHAT IS COVERED

The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of two (2) years from date of purchase. The manufacturer warrants the included bulbs to be free from defects in materials and workmanship for a period of ninety (90) days from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.

WHAT IS NOT COVERED

The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

Pre-Installation

PLANNING INSTALLATION

Read all the instructions before installation.

IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-855-HD-HAMPTON.

USING BULBS OF DIFFERENT WATTAGES

Bulb Type| Bulb Wattage| Maximum Number of Light Strings
S14, Medium (E26) Base (Included)| 11 watts| 10 strings

NOTE: Support cable and hardware are not included (sold separately).

NOTE: You may use bulbs of different wattages other than those included (sold separately). See the chart below for details.

USING LED BULBS

PACKAGE CONTENTS

Part	Description	Quantity
A	#14 SJTW 2-Conductor Wire with attached Medium Base (E26) Socket	1 light

string w/12 sockets
B| S14, Medium Base (E26) 11W Incandescent Bulbs| 18 (12 + 6 spare)

Installation

Preparing For Installation

Disconnect the power at the source prior to attempting to install or service the light string.
Prior to installing the bulb inside each socket, check the position of the power contact point (brass terminal at center). It is important that the position of the terminal is raised to around a 20 degree angle to ensure reliable contact with the bulb base. If it is necessary to raise the position of the brass terminal, use a small flat blade screwdriver to gently raise the position of the blade. DO NOT repeatedly adjust this terminal as this can result in breakage.
This light string requires 120V, 50/60Hz input and each light string consumes 1.1 amps (132 watts). Use only with 120V AC receptacles.

Installing Bulbs

BEFORE PLUGGING IN THE LIGHT STRING, FILL EACH SOCKET WITH A BULB. The socket is tall and the terminal is at the top, inside of the socket. When inserting, turn the bulb slowly yet firmly to fully secure.
After each socket has a bulb, cover the end of the light string set with the end socket cover, then plug the light string into a 120V AC outlet and be sure each light bulb lights. If not, note which one(s) did not light, ALWAYS UNPLUG LIGHT STRING, then carefully turn the unlighted bulb(s) until they make contact with the terminal at the top of the socket. Repeat until all the bulbs light up.

Install or insert light string bulbs only during dry and calm weather conditions. Ambient temperatures around 18˚-35˚C / 65˚-95˚F are ideal so the light string will be more flexible.

Suspending The Light String

The light string must be securely attached to a support structure at each end of each span. The maximum unsupported span distance for the light string is 6 m/20 ft.
Secure the light string to the supporting hardware (eyebolts, brackets, etc., not included) using cable ties (not included).
For spans exceeding 6 m/20 ft, use a properly rated cable support system and cable ties (not included) and follow local codes for suspended structures and loads.
The light sockets must be suspended so that the bulbs are facing down ONLY. DO NOT mount the light string with the sockets facing upward. Bulbs should hang freely in a downward direction with a minimum of 7.6 cm/3 in. space from the nearest object. DO NOT cluster the bulbs.

NOTE: Support cable and hardware are not included (sold separately).

NOTE: Avoid damage to the insulation during installation. DO NOT pierce or otherwise compromise the outer covering of the wire or socket, jacket, or sheathing. DO NOT secure the light string to buildings or other structural supports using nails, staples or other sharp, conducting materials that may damage the cord.

IMPORTANT: When interconnecting multiple light strings, prevent the connection from separating. Mount to the support cable or use twine or wire to connect the first and last sockets via the mounting hole at the top of each.

User Servicing Instructions

Grasp the plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
To clean the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.
Periodically inspect the wire and sockets for degradation due to weather, UV light or other damage.
Check the bulbs regularly for loose, broken, or unlit bulbs. Replace bulbs immediately. DO NOT OPERATE THE LIGHT STRING WITH ANY MISSING BULBS, DAMAGED SOCKET/S, AND/OR DAMAGED BULBS.
To replace bulbs in the light string, unscrew the existing bulbs by lightly holding the socket in one hand and twisting the bulb counter-clockwise. Bulbs may be tight in the sockets. This is normal to prevent moisture from getting into the socket. Be sure to fill every socket of the light string (12 bulbs total).
Use only with type G, A, Sbulbs 11 watts max

Troubleshooting

Problem	Possible Cause	Solution
The lights will not turn on.	A bulb is burned out.	Replace the light bulb.
The power is off.	Ensure the power supply is turned on.
There is a faulty switch.	Test or replace the switch.
There is a faulty wire connection.	Check the wiring.
A bulb is not making contact with terminal.	Check position of terminal inside

socket.
The fuse blows, or the circuit breaker trips, when the light is turned on.| There are crossed wires, or the power wire is grounding out.| Discontinue use of the light string. Check the wire connections. Contact a qualified electrician or call the Customer Care Service Team at 1-855-HD-HAMPTON.

Customer Support

Questions, problems, missing parts?
Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday,
9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use