Smart RGB LED Controller SPXRGBC User Manual
- June 8, 2024
- Stinger
Table of Contents
SPXRGBC
SMART RGB LED CONTROLLER
Universal, waterproof, RGB controller with Bluetooth Control.
Before you start, review directions completely. If your vehicle is not pre-
wired for accessory lighting, you may need a switch and relay.
SPECIFICATIONS
-
* * APP: EZ LED (iOS and Android)
- Operating temperature: -20~80°C
- Voltage: DC12V/24V,
- Distance: 10-20M
- Maximum output current: 10A
- Outputs: 4
SMART RGB LED CONTROLLER (CONT)
WIRING DIAGRAM
The SPXRGBC can be wired to a switch or to accessory power using the BLUE
lead. The RED wire should be connected to constant power to save the RGB light
settings.
NOTE: Do not connect the Red and BLUE to constant power and use the app to turn the module on and off. The module will draw power even when turned off with the app.
GET THE EZ LED APP
Scan the QR Code, or visit Google Play or iTunes to download the EZ LED app.
Once the app is installed, power up the SPXRGBC Module and open the app. The
module should auto-connect and be listed in the Group Device List.
https://itunes.apple.com/us/app/ez-led/id1031900939?mt=8&ign- mpt=uo%3D4
https://play.google.com/store/apps/details?id=com.consmart.blelight13&hl=en_US
LIMITED WARRANTY:
Stinger warrants this product to be free of defects in materials and
workmanship for a period of one (1) year from the original date of purchase.
This warranty is not transferable and applies only to the original purchaser
from an authorized Stinger dealer in the United States of America only. Should
service be necessary under this warranty for any reason due to manufacturing
defect or malfunction, Stinger will (at its discretion), repair or replace the
defective product with the new or remanufactured product at no charge. Damage
caused by the following is not covered under warranty: accident, misuse,
abuse, product modification or neglect, failure to follow installation
instructions, unauthorized repair attempts, misrepresentations by the seller.
This warranty does not cover incidental or consequential damages and does not
cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to
accident or normal wear and tear is not covered under warranty.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by
that country’s Authorized Stinger reseller and not by Stinger. Consumers
needing service or warranty information for these products must contact that
country’s reseller for information.
Stinger is a Power Brand of AAMP Global
15500 Lightwave, Clearwater, Florida 33760
P: 888-228-5560
support@stingerelectronics.com
www.stingerelectronics.com
© 2019 AAMP Global
Smart RGB LED Controller SPXRGBC User Manual – Optimized
PDF
Smart RGB LED Controller SPXRGBC User Manual – Original
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>