Yamaha EP-E70A Earphones User Manual

Yamaha EP-E70A Earphones User Manual

Yamaha Global Site: https://www.yamaha.com/
Yamaha Downloads: https://download.yamaha.com/
Manual Development Group © 2020 Yamaha Corporation Published 10/2020

Introduction

Thank you for purchasing this Yamaha product.

• For correct and safe use of this product, be sure to first read this manual and the separate “Safety Brochure”.
• After reading this manual, keep it together with the warranty card in a safe place for future reference.

This product is not designed to be waterproof. Do not expose this product to liquids such as sweat, rainwater or seawater.

A. Product, Accessory and Part Names 3

1. Earphones

2. ANC key

3. Charging/External input connector

4. – key

5. + key

6. Function key

7. Indicator

8. Power key

9. USB power cable

10. Eartips (XS, S, M, L, XL) 1 set each
    ***** The M-size eartips are attached.

11. Flight Adaptor

12. 5mm stereo mini plug cable

13. Quick Start Guide

14. User Guide (Basic) (this manual)

15. Safety Brochure

16. Carrying case

Preparation

B. Charging

With the included USB power cable, connect the charging
connector on the earphones to the USB port on a commercially available USB power adaptor (5 V DC/min. 0.5 A output).

• The indicator is lit in red during charging and goes off when charging is completed.
• Charging takes about 2.5 hours. When charged, the earphones can play back continuously for approximately 18 hours.

C. Making a Bluetooth® connection

When using the earphones for the first time, the pairing process, which allows Bluetooth devices being connected to detect each other, must be performed. Once paired, the Bluetooth devices will be automatically connected the next time they are turned on.

* Pairing

1. Hold down the power key for at least five seconds to
   enter pairing standby.
   • The indicator flashes alternately in blue and red.

2. Operate the connected Bluetooth device to display the Bluetooth setting screen.

3. Select “Yamaha EP-E70A” from the displayed screen.
   • When pairing has completed, the indicator lights up in blue for 20 seconds.
   • If pairing has not completed within two minutes, it will be considered to have failed, and the indicator goes off.
   • To try pairing again, turn the power off and start again from step 1.

* Registering another Bluetooth device/ Perform pairing operations again*
Turn the power off, and then start from step 1 of “Pairing”.
Turning on/off**
Hold down the power key for two seconds to turn the
earphones on/off.

• After the earphones turn on, the indicator flashes in red to indicate the remaining battery power.

Basic operations

Listening to music

Play: Briefly press the function key once.
Pause: During playback, briefly press the function key once.
Raise the volume: Briefly press the + key once.
Lower the volume: Briefly press the – key once.
Skip to the next song: Hold down the + key for two seconds, until you hear a “beep” sound.
Go back to the beginning of the song, or skip to the previous song: Hold down the – key for two seconds, until you hear a “beep” sound.
Enable/disable AMBIENT SOUND and ADVANCED ANC: Press the ANC key

Using the phone

Receive a phone call: When a phone call comes in, briefly press the function key once.
End a phone call: During the phone call, briefly press the function key once.
Raise the conversation volume: Briefly press the + key once.
Lower the conversation volume: Briefly press the – key once.
Ignore a call: When a phone call comes in, hold down the function key for two seconds.

Specifications

Bluetooth version: Version 5.0
Supported profiles: A2DP, AVRCP, HFP, HSP
Supported codecs: SBC, AAC, Qualcomm® aptX ™Adaptive
RF Output Power: Class 1
Maximum communication range: Approximately 10 m (without interference)
Number of devices that can be registered: Up to 8 devices
Internal rechargeable battery: Lithium-ion battery
Charging time: Approximately 2.5 hours
Continuous playback time: Approximately 18 hours
Charging temperature: 5 – 40 °C

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their respective owners.

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

[Europe model]
Wireless communication functions Bluetooth
Radio Frequency (Operational Frequency): 2402 MHz to 2480 MHz
Maximum Output Power (EIRP): 8.5 dBm

Yamaha EP-E70A Earphones User Manual – Original PDF
Yamaha EP-E70A Earphones User Manual- Optimize PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>