Shenzhen Kabest Technology KBW1905 Wireless Charging Desk Lamp User Manual
- June 3, 2024
- Shenzhen Kabest Technology
Table of Contents
USER MANUAL
Introduction:
wireless charging desk lamp is an intelligent product Simply designed,
It emits various lighting effects with different colour temperature. It also
has a built-in wireless charger which is compatible with any wireless phone
and device.
It is integrated with USB output function which makes charging mush easier.
Wireless charging Applicable Devices:
- Devices with built -in wireless charging receiver
- Devices with reserved wireless charging interface beside its battery
- Devices with wireless charging receiver in its protection case
Note: All devices must be wireless phone
Specifications:
| Input: | 5V/2.5A,9V/2A |
|---|---|
| Desk Lamp Output: | 10W |
| LED QTY: | 62pcs x 2835LED |
| CRI: | 85max |
| Center Luminance: | 800Lux |
| Color Temperature: | 3000&3400&4500&5600K LED |
| Longevity: | 50,000 hrs |
| Wireless Charging Output: | 5V/1A9V/1.1A |
| Material: | Bamboo |
| Transferring Distance: | ≤8mm |
| Efficiency: | ≥76% |
| Size: | 121169380mm |
How to use:
-
Connect the Lamp using the supplied power cable and a wall adaptor. To turn on the lamp. Press the power button once.
-
Light adjustment:
You can adjust the brightness as well as the shade of the light using the Various touch indicator
– Press the Sun icon to change the shade
– Long press the top arrow to increase the brightness
– Long press the down arrow to decrease the brightness -
When using the wireless charging function, place phones with wireless receiver onto the wireless charging area.
At this time, the wireless charging indicator turns on and flickers to
indicate that wireless charging is working properly.
The indicator turns off after the phone is removed
Notes:
- To ensure effective usage please use an 5V/2.5A adaptor and good quality cable.
- Please keep it away from water or other liquid.
- Power off the item before it is cleaned.
- Keep the working temperature at 0-45℃.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’ s RF Exposure guidelines, This equipment
should be
installed and operated with minimum distance between 20cm the radiator your
body: Use only the supplied antenna
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum 20cm distance between the
radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>