switchmate SS004W Light Switch User Guide

switchmate SS004W Light Switch User Guide

Hello!

Thank you for purchasing ClicSmart. We are excited to bring convenience, security, and peace of mind into your home

Package Contents

Works With

Warranty

simply~ smart home

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including Interference that may cause undesired operation

For further help or inquiries, visit: www.mysimplysmarthome.com/ support
©2021 My Simply Smart Home All Rights Reserved CLSM ROOl R or CLSMROOlT

Installation

1. Install two AA batteries into the back of the
   ClicSmart Controller “Ensure you have the correct style for your switch type

2. Download the free Clic Smart App from the Google Play or Apple App Store onto your phone
   

3. Launch the ClicSmart App and walk through the simple installation
   “You may be asked to update your firmware. Please accept this update and stay within 20 feet of your ClicSmart, making sure your phone is on during the whole process and the opp is open

4. Snap ClicSmart over your light switch, ensuring that the “top” sticker is feeing up and the light switch and the Switch Slim are in the “on/.A. TOP position”. Magnets inside the ClicSmart hold it in place!
   

Troubleshooting

Q: My ClicSmart Controller or Connect Plug is not automatically deteded during setup
A: Check to moke sure the device’s Blue LED is blinkingbefore trying to odd the Device. If you still experience difficulties, try the following steps to odd monuolly:

1.  In the App, seled the + Icon to add devices
2.  Select the device you’re trying to add (ClicSmart Controller or ClicSmart Connect Plug)
3. Follow the on-screen instrudions to odd the device monuolly

Q: I am having trouble connecting my ClicSmart or Connect to my smartphone
A: Different phones may behave differently when connecting to ClicSmart. When experiencing difficulties, try the following steps:

1. Close the ClicSmart App completely, even from the background and restart the opp – try to connect
2. Turn Bluetooth off and then on, and make sure you’re conneded to WiFi – try to connect
3.  Reset the ClicSmart Controller by taking the botteries out and putting them back in – try to connect
4. Reset the ClicSmart Conned Plug by unplugging it and plugging it back in – try to connect

Q: I cannot control my ClicSmart Controller remotelyor am having issues with Google Homa/ Alexa
A: For your ClicSmarl Controller to gain remote occess (including Google Home/ Alexa), it MUST be linked to your ClicSmart Connect Plug and your ClicSmart
Controller must be within Bluetooth range (20-30 feet) of your Conned Plug. Ensure your devices ore paired by following the previous steps for connecting your
ClicSmart Controller and Connect Plug. For further help troubleshooting please contact us at: www.mysimplysmarthome.com/support

FCC statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>