Tellur Mood Bluetooth True Wireless Earphones TLL511331 User Manual
- June 8, 2024
- Tellur
Table of Contents
Thank you for choosing us!
Please read this User Manual carefully and keep it for
future references.
Before using the earphones, fully charge their battery
and connect them with a compatible phone.
Description and accessories
This product is equipped with different types of
earmuffs. Please choose the appropriate earmuffs.
Operating instructions.
-
charging the earphones
During using, when the red light flashes to indicate
that the power of the earphones is too low, charge the
earphones. Put the earphones into the charging case;
the charging time is about 1.5 hours and the red light
of the earphone will be on when charging. When fully
charged, the blue light will be on and will automatically
turn off after 5 seconds. -
charging the case
The red light will be on during charging and will turn
blue once the case will be fully charged. A full charge
cycle takes about 3 hours.
Battery capacity:
5V 35mAh [Earphones] 5V 420mAh [Charging easel
-
warning: The rechargeable battery of this product
must be disposed properly for recycling. Please do not
put the battery into a fire to avoid an explosion. It is
recommended that lithium batteries be charged every
three months if not used. -
Power on or off
-
Power on: Take out the earphones from the charging
case and they will automatically turn on. -
Power off: Put the earphones back into the charging
case and they will automatically shut down.
Functions:
-
Answer incoming call: Short press the MFB to
answer the call. -
Siri/Voice dialing: Once the earphones are paired,
hold the MFB for 2s, then release the button. -
Reject incoming call: Hold the MFB button for 1 s,
then release the button. -
Cancel dialing: While calling, press the MFB once to
cancel the dialing. -
End call: Press the MFB once to end the call.
-
Pause music: While playing music, click the MFB to
pause playback. -
Play music: While music is paused, click the MFB to
restart playback. -
Previous song: While playing music, press the left or
right earphone’s MFB three times to go to previous
song. -
Next song: While playing music, double-click the
left or right earphone’s MFB to switch to the next song -
Volume”+”: Double press and hold the MFB,
volume will increase incrementally. -
Volume”-“: Press the MFB three times and hold,
volume will decrease incrementally. -
Automatic reconnection: Once powered on, the
earphones will automatically reconnect to the last
paired phone.
Clear pairing information
With the earphones in pairing mode, quickly press the
MFB three times and hold for 5 seconds after the third
press. Turn off and back on the earphones. Now
pairing history has been cleared.
Please follow the company’s usage regulations. The
damage caused by incorrect use will invalidate the
product’s warranty
■ Maintenance
Please follow these suggestions to help you comply
with the warranty and extend the life of the product.
-
Keep the product dry and do not put it in a damp
place to avoid affecting the internal circuitry of the
product. -
Do not put the product in a place where the sun is
shining or where the temperature is high. High
temperatures can shorten the life of electronic
components, damage batteries, and deform some
plastic parts. -
Do not put the product in a cold place to avoid
damaging the internal circuit board. -
Do not attempt to disassemble the product. If you
are not a professional, you may damage the product. -
Do not drop, strongly vibrate, or hit the product with
a hard object to avoid damaging internal circuits. -
Do not use harsh chemicals or detergents to clean
the earphones. -
Do not use sharp objects on the surface of the
product to avoid damage to the outer casing and affect
the appearance. If the product does not work properly,
please send it to your qualified service point and the
staff will be happy to help you solve the problem.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your
product, battery, literature or packaging reminds you
that all electronic products and batteries must be
taken to separate waste collection points at the end
of their working lives; they must not be disposed of
in the normal waste stream with household garbage.
It is the responsibility of the user to dispose of the
equipment using a designated collection point or
service for separate recycling of waste electrical and
electronic equipment [WEEE] and batteries according
to local laws.
Proper collection and recycling of your equipment
helps ensure EEE waste is recycled in a manner that
conserves valuable materials and protects human
health and the environment, improper handling,
accidental breakage, damage, and/or improper
recycling at the end of its life may be harmful for
health and environment.
Declal’ation of confol’mity
We, ABN SYSTEMS INTERNATIONAL S.R.L., Bucharest, Sector 1, Marinarilor
street, nr. 31, we declare on own responsibility that the product below:
Product description: Bluetooth headset TWS Tellur Mood, black
Brand: Tellur
Product code: TLL511331
It does not endanger life, health, work safety, does not have a negative
impact on the environment and corresponds to the standards stated in the
manufacturer’s declaration of conformity. The product is in compliance with
the following standards and/ or other normative documents:
RED – 2014/53/EU
Applied standards:
Health, EN 62479, 2010
Safety, EN 623681,2014+A11, 2017
EMC, ETSI EN 301 489-1v2.2.0, ETSI EN 301 489-17 v 3.2.0
Radio:ETSI EN 300328 v2.1.1
The product bears CE mark, applied in 2019
Name: George Barbu Place and date: Bucuresti, 09-08-2019
Function: General Manager Signature
Read More About This Manual & Download PDF:
Tellur Mood Bluetooth True Wireless Earphones TLL511331 User Manual –
Optimized PDF
Tellur Mood Bluetooth True Wireless Earphones TLL511331 User Manual –
Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>