SteelSeries ARCTIS 1 Wireless Headset Information Guide
- June 8, 2024
- SteelSeries
Table of Contents
ARCTIS 1 WIRELESS
PRODUCT INFORMATION GUIDE
WELCOME TO ARCTIS
Your new headset is the result of our unyielding pursuit of perfection for over 15 years. We poured our hearts into creating the best possible gaming headset by pushing the boundaries of sound quality, mic clarity, comfort, and style. Arctis is our glory; now go chase yours.
STEELSERIES ENGINE
Download SteelSeries Engine to customize your audio settings and to integrate with Engine Apps (like Discord): steelseries.com/engine
PACKAGE CONTENTS
Arctis 1 Wireless Headset
USB-C Wireless Dongle
USB Charging Cable
USB-C to USB-A Adapter Cable
ClearCast Microphone
SYSTEM REQUIREMENTS // COMPATIBILITY
PC
Playstation 4
Nintendo Switch
Android (with USB-C)
PRODUCT OVERVIEW
SETUP
WIRELESS SETUP
WIRED SETUP
CHARGING
POWER ON/OFF
PAIRING
MICROPHONE
MULTIMEDIA CONTROL
REGULATORY
Europe – EU Declaration of Conformity
Hereby, SteelSeries ApS. declares that the equipment which is compliance with
directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive
(2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the
European Community.
The full text of the EU declaration of conformity is available at the
following internet address: https://steelseries.com/ Operating Temperature:
0 to + 40 °C
SteelSeries ApS. hereby confirms, to date, based on the feedback from our
suppliers indicates that our products shipping to the EU territory comply with
REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals –
(EC) 1907/2006) compliance program. We are fully committed to offering REACH
compliance on the products and posting accurate REACH compliance status for
the all of products.
Frequency bands and Powers (Headset and Transceiver)
a. Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHz
b. Maximum radio-frequency power transmitted in the frequency band(s) in which
the radio equipment operates:
•EIRP:л/4-DQPSK: 4 dBm (Headset ANT 1)
•EIRP:л/4-DQPSK: 2.91dBm (Headset ANT2)
•EIRP:л/4-DQPSK: 7.72 dBm (Transceiver)
c. Software Version: V1.05
WEEE
This product must not be disposed of with your other household waste or treat
them in compliance with the local regulations or contact your local city
office, your household waste disposal service, or the shop where you purchased
the product.
Safety Guideline for Lithium Battery
This battery must not be disposed of with your other household waste or treat
them in compliance with the local regulations or contact your local city
office, your household waste disposal service, or the shop where you purchased
the product.
“CAUTION!” Risk of explosion if the battery pack is not replaced by the
same type as specified by the manufacturer.
Please keep following all listed important warnings and cautions below while
using this battery pack to avoid any damage
or hazard.
1. The battery polarity (+) and (-) shall not be connected and charged
reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
2. Please keep this battery pack away from fire and high heat sources due to
explosion might happen. Do not place your battery pack close to any heater or
hot location.
3. This battery pack shall not be hit or impacted. This battery pack shall
not be dealt with any sharp or keen objects either.
4. This battery pack shall not be exposed to moisture, dripping or splashing.
5. If any electrolyte flow out of this battery pack when touch the user’s
eyes and skin, please seek medical advice immediately.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirements, the
device can be used in portable exposure conditions without restriction.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Headset FCC ID: ZHK-HS00021
Transceiver FCC ID: ZHK-HS00021TX
More information and support at steelseries.com
SteelSeries ARCTIS 1 Wireless Headset Information Guide – Download
[optimized]
SteelSeries ARCTIS 1 Wireless Headset Information Guide –
Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>