TOYOTA VELOZ Portable Tyre Pump Owner’s Manual

VELOZ Portable Tyre Pump

Product Overview

The Portable Tyre Pump is a 12V DC inflator that can be used to inflate tyres, mattresses, balls and other inflatables. It comes with a cigarette lighter plug that plugs right into your vehicle’s cigarette lighter socket.

• LED backlight and easy to read pressure gauge
• Highly effective work light
• Compact size for easy carrying and storing
• Perfect for filling car & bicycle tyres, athletic balls, air mattresses, rafts, etc.

Safety Instructions

It is important to follow the safety instructions to avoid any accidents or damage to the product.

• Do not overinflate the tyre as it can cause tyre to burst. Double check the rated pressure values recommended for your vehicle. (refer owner’s manual)
• Do not leave the inflator unattended while the unit is running. Avoid bursting due to over inflation.
• Park the vehicle as far away as possible from flowing traffic in case of a breakdown.
• Conform to traffic laws.

Inflating Tyres

1. Attach the brass connector to the tyre valve.
2. Plug the 12Volt power cord on the inflator into cigarette lighter socket of the vehicle.
3. With the vehicle running, place the ON/OFF switch to ON position.
4. Check the pressure gauge for the current pressure value.
5. Inflate the tyre to the desired pressure value (refer owner’s manual).
6. When the tyre is completely inflated to the desired pressure value, place the ON/OFF switch to OFF position.
7. Disconnect the brass connector from the tyre valve.

Inflating Inflatables (Balls, Beach Toys, Air Mattresses etc.)

1. Attach the appropriate needle or nozzle to the brass connector.
2. Insert the needle or nozzle into the item that you wish to inflate.
3. Plug the 12Volt power cord on the inflator into cigarette lighter socket of the vehicle.
4. With the vehicle running, place the ON/OFF switch to ON position.
5. Check the pressure gauge for the current pressure value.
6. Inflate the object to the desired firmness.
7. When the object is completely inflated to desired firmness, place the ON/OFF switch to OFF position.

Product Specification

The product specification is as follows:

• Model: VELOZ – AUG – 2022 – 001
• Type: Portable Tyre Pump

SAFETY INFORMATION

WARNING: Risk of bursting. Over inflating tyre can cause tyre to burst. Double check the rated pressure values recommended for your vehicle.
(refer owner’s manual)
Caution
Be careful not to over inflate. Do not leave inflator unattended while the unit is running. Avoid bursting due to over inflation.

Safety measurement in the event of a breakdown
Park the vehicle as far away as possible from flowing traffic. Switch on the hazard warning lights. Engage steering lock and the wheels in the straight ahead position. Apply handbrake and engage gear into . All occupants should get out of the vehicle and wait outside the danger zone. Place warning triangle to alert traffic. Conform to traffic laws.

Tips

• It is strongly recommended that you keep the vehicle’s engine running while using the inflator to prevent discharge of your vehicle’s battery. Inflator performance is also enhanced when operating inflator with vehicle engine running.
• Do Not leave the inflator unattended when the unit is in operation
• Pay attention to the pressure values of inflator when inflating. Prevent pressure values exceeding the value suggested by manufacturer. (refer owner’s manual)

Product Overview

The 12V DC inflator comes with a cigarette lighter plug that plugs right into your vehicle’s cigarette lighter socket to inflate tyres, mattresses, balls and other inflatables.

Features

• Tyre inflator, with LED backlight and easy to read pressure gauge.
• Highly effective work light.
• Perfect for filling car & bicycle tyres, athletic balls, air mattresses, rafts, etc.
• Compact size for easy carrying and storing

Discription of operation

• ON/OFF switch: “ON” to start unit and “OFF” to shut off the power at the end of use.
• Pressure gauge: easy to read pressure values.
• Brass connector: used with the accessory of inflator or used to inflate standard tyre.
• Inflation needle: attaches to brass connector to be used to inflate sport balls.
• Plastic nozzle: attaches to brass connector to be used to inflate toys and air mattresses.

Inflating tyres

1. Attach the brass connector on the end of the air hose to the tyre valve stem. (See Fig.1)
2. Be sure to screw the valve stem threads tightly. (See Fig.2).
3. To inflate simply plug the power cord into cigarette lighter socket.
4. With the vehicle running, place ON/OFF switch to “ON” position and begin inflation.
5. When pressure gauge reaches desired pressure, place the ON/OFF switch to “OFF” position. Disconnect the power plug and remove the brass connector from the tyre valve stem.

Inflatables

(Balls, Beach Toys, Air Mattresses etc.)

1. Attach the appropriate needle or nozzle to the brass connector.
2. Insert the needle or nozzle into the item that you wish to inflate.
3. Plug the 12Volt power cord on the inflator into cigarette lighter socket of the vehicle.
4. With the vehicle running, place the ON/OFF switch to “ON” position.
5. When the object is completely inflated to desired firmness, place the ON/OFF switch to “OFF” position.

Product / Device Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>