Steelseries ARCTIS 7 Product Information Guide
- June 8, 2024
- SteelSeries
Table of Contents
ARCTIS | 7
PRODUCT INFORMATION GUIDE
STEELSERIES ENGINE
To enjoy DTS Headphone:X 7.1, and custom audio effects on your new Arctis 7 headset, download SteelSeries Engine at steelseries.com/engine
WELCOME TO ARCTIS.
Your new headset is the result of more than 15 years of gaming expertise and our unyielding pursuit of perfection. We poured our hearts into making your new Arctis, giving it the best gaming mic available, 7.1 surround sound, and comfort and style unlike anything you’ve experienced before.
PACKAGE CONTENTS
Product Information Guide
Arctis Card
Headset
Wireless Transmitter
Mobile / Console Cable
Micro-USB Charging Cable
SOFTWARE REQUIREMENTS
Platforms:
Windows 7 – Windows 10
Mac OS X 10.8 – 10.11*
120 MB of free hard drive space for installation
SYSTEM COMPATIBILITY
PC / MAC / MOBILE /
PS4 / XBOX ONE / VR
DTS Headphone: X 7.1 is available for Windows 7-10 only. Software installation
required
PRODUCT OVERVIEW
01 Ski Goggle Headband
02 Mobile / Console Cable
03 Wireless Transmitter
04 Micro-USB Charging Cable
05 Airweave Ear Cushion*
06 Retractable Microphone
07 Microphone Mute Button
08 Volume Control
09 Mobile Cable Jack
10 Headphone Share Jack
11 Micro-USB Charging Jack
12 ChatMix Dial
13 Power Button
SETUP
CHARGING
POWER ON / OFF
To power on the headset press and hold the power button for at least 3 seconds. You will hear a tone, and the power button will illuminate.
To power off the headset press and hold the power button for at
least 3 seconds
PAIRING
The headset is already paired to the transmitter when it arrives.
LINE IN / LINE OUT
When headset is off, audio can be sent to speakers via Line Out. When headset is powered on Line Out is automatically muted.
MICROPHONE
Position the microphone close to the corner of your mouth with the flat surface facing you
SKI GOGGLE HEADBAND
accessory headbands available at steelseries.com
SYSTEM SETTING: WINDOWS
01 Go to Sound Settings
02 Under ‘Playback’ highlight Arctis 7 Game Audio and select ‘Set Default’
03 Under ’Recording’ highlight Arctis 7 Microphone and select ‘Set Default’
04 In your VoIP (chat) application select Arctis 7 Chat Audio as the default
audio device
SYSTEM SETTING: MAC
find help at support.steelseries.com
01 Go to System Preferences > Sound
02 Under ‘Output’ select Arctis 7 Game Audio
03 Under ‘Input’ select Arctis 7 Microphone
04 In your VoIP (chat) application select Arctis 7 Chat Audio as the default
audio device
Europe – EU Declaration of Conformity
Products with CE marking complies with the R&TTE Directive (99/5/EC) and R.E.D
(2014/53/EU), the EMC
Directive (2004/108/EC; 2014/30/EU), and the Low Voltage
Directive(2006/95/EC;2014/35/EU) issued by the Commission of the European
Community.
-
EN60950-1 Safety of Information Technology Equipment EN 62311
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz) -
EN 300 328 ( For 802.11b/g/n )
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive -
EN 301 489-17
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment -
EN 301 489-1
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements
The product is EEE product and contained in the Li-Ion Battery Cell. This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operations in the 5GHz products are restricted to indoor usage only.
Industry Canada Statement:
This device complies with RSS-247 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
USA
656 W Randolph St, Suite 3E
Chicago, IL 60661, USA
+1 312 258 9467
Steelseries ARCTIS 7 Product Information Guide – Download
[optimized]
Steelseries ARCTIS 7 Product Information Guide –
Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>