ALUMA-SHIELD 21059 Conductor Termination Compound Instruction Manual

June 3, 2024
ALUMA-SHIELD

ALUMA-SHIELD-LOGO

ALUMA-SHIELD 21059 Conductor Termination Compound

Surface Compound for use in Aluminum Electrical Cable and Conduit

Connections

This surface compound is a mixture of fine metallic zinc particles suspended in a high-temperature grease. It seals out air and moisture from joint; lowers electrical resistance of connectors; generally prevents seizing and galling of threads; and, is stable over a wide temperature range
(-40º F to +300º F).

For Threaded Aluminum Conduit Fittings
Coat threads with compound and assemble fittings.

INSTRUCTIONS FOR ALUMINUM CABLE CONNECTIONS MIX CONTENTS PRIOR TO USE

  1. Coat cable strands with compound and brush or abrade surfaces through compound. Work the compound down in between strands.
  2. Insert coated cable into connector and tighten or compress joint.
  3. CAUTION: Wipe off excess compound thoroughly from outside of connector and cable insulation.

NOTE: UL Listed only for use on electrical cables in cable connector assemblies, or on bus bars rated for NEC applications up to 600 V, 1000 V in signs or fixtures and 90ºC.

PRECAUTIONARY STATEMENT

  • Prevention: Observe good industrial hygiene practices. Response: Wash hands after handling.
  • Storage: Store away from incompatible materials.
  • Disposal: Dispose of waste and residues in accordance with local authority requirements.

SUPPLEMENTAL INFORMATION

Very toxic to aquatic life with long-lasting effects.

Supplier Identification

ABB Installation Products Inc.
860 Ridge Lake Blvd.
Memphis, Tennessee, 38120
U.S.A.
EMERGENCY NUMBER: 1-703-741-5970
Limited Warranty Applies.
Refer to: tnb.abb.com/ecpwarranty for full warranty terms.
©2021 ABB Installation Products Inc. and/or its related companies. All Rights Reserved.
tnb.abb.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals