Yarnspirations SCN0518-036089M Punch Needle Wall Shop Kit Instruction Manual

Yarnspirations SCN0518-036089M Punch Needle Wall Shop Kit

Product Specifications

• Product Name: Daisy Do Punch Needle Wall Shop Kit
• Model Number: SCN0518-036089M
• Release Date: January 11, 2024
• Size : Medium
• Craft Skill Level: Easy
• Measurement: Approximately 16 inches [15 cm] diameter

Product Usage Instructions

Materials Needed:

• Contrast A Ecru (00004) – 1 ball or 26 yds/24 m
• Contrast B Country Yellow (01612) – 1 ball or 6 yds/15.5 m
• Contrast C Seabreeze (01201) – 1 ball or 26 yds/24 m

Instructions:

1. Transfer the daisy design to fabric, ensuring the pattern is sized to 6 inches [15 cm] diameter.
2. Thread the punch needle following the package instructions. Ensure it moves freely through the needle barrel.
3. Keep in mind that the loop side of your project will be the reverse of what you have traced.
4. Set punch needle to D setting. Start with the main outline of daisies, then move to fill them following colors indicated on the diagram.
5. Punch through the front of work for daisy centers and background to create low loops that sit flush to the fabric.
6. Trim excess fabric around the hoop, leaving about 1 inch [2.5 cm] border.
7. Glue a piece of felt to the back of the Hoop for finishing.

Tips for Punch Needle Usage:

• Keep slack on the yarn while punching to prevent tension issues.
• Ensure the needle is pushed all the way down until the handle touches the fabric.
• Avoid lifting the needle too high out of the cloth between punches to maintain tension.

MATERIALS

Lily® Sugar’n Cream® (2.5 oz/70.9 g; 120 yds/109 m)

• Contrast A Ecru (00004) 1 ball or 26 yds/24 m
• Contrast B Country Yellow (01612) 1 ball or 6 yds/15.5 m
• Contrast C Seabreeze (01201) 1 ball or 26 yds/24 m

Note : 1 ball of each A, B, and C will make 4 Wall Hangings. Susan Bates® Adjustable Punch Needle. 6″ [15 cm] Anchor® Faux Wood Embroidery Hoop. 1 piece of 8″ [20.5 cm] square of monk’s cloth. Hot glue gun and glue sticks. Scissors. 1 piece of 6″ [15 cm] diameter felt for backing.

ABBREVIATIONS
Approx = Approximately

MEASUREMENT
Approx 16″ [15 cm] diameter.

INSTRUCTIONS

1. Place the fabric centered in 6″ [15 cm] Anchor® Faux Wood Embroidery Hoop.
2. Transfer the daisy design to fabric, ensuring pattern is sized to 6″ [15 cm] diameter. See page 2 for methods of transferring the design and page 3 for template.
3. Thread the punch needle following the package instructions. It should move freely through the barrel of the needle.
4. Keep in mind that the loop side of your project will be the reverse of what you have traced.
5. Set punch needle to D setting. Start with the main outline of daisies then move to fill them following colors indicated on diagram. When flowers are complete, turn work over and punch through front of work for daisy centers and background to create low loops that sit flush to the fabric. Start with main outlines then move to fill in.
6. Keep slack on the yarn as you punch so that the yarn will stay in the cloth. If you have too much tension on the yarn it will pull back up as you pull up your needle for the next punch.
7. Keep the opening (eye) of the needle facing the direction you are punching.
8. Be sure to punch the needle all the way down until the handle touches the foundation cloth.
9. Do not lift the needle too high out of your cloth in between punches. Again, the tension will pull up the prior stitches. Drag the needle across the cloth to the next punch.
10. Once complete, trim excess fabric around hoop, leaving about 1″ [2.5 cm] border.
11. Using hot glue, fold the edges to back of work and glue in place around inside of hoop.
12. Glue piece of felt to back of Hoop.

HERE ARE TWO METHODS FOR TRANSFERRING THE PATTERN Light box or source

1. Place the printed pattern on a light box or tape to a window-the sunnier outside it is, the better.
2. Center the cloth over the pattern and tape or hold in place.
3. Trace pattern onto cloth with pencil or felt tip marker.

In Hoop Method

1. Cut out the pattern.
2. Center and tape the pattern to the inside of the hoop.
3. Trace pattern onto cloth with pencil or felt tip marker. Remove pattern.

DAISY DO PUNCH NEEDLE WALL

For accessibility support, please contact customer care at 1-888-368-8401 or access@yarnspirations.com.

FAQ

Q: How many wall hangings can be made with the materials provided?
A: One ball of each Contrast A, B, and C will make 4 Wall Hangings.

Q: How should I transfer the daisy design to fabric?
A: You can use a lightbox or tape the pattern to a window to trace the design onto the cloth with a pencil or felt tip marker.

Q: What should I do if the yarn tension is too tight while punching?
A: Keep slack on the yarn as you punch to prevent it from pulling back up. Excessive tension can cause issues with the needlework.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>