imperial Spy Alarm User Guide

: June 7, 2024
: imperii electronics

Table of Contents

Basic Instructions:
Control Instructions:
Product Operation:
Remote Control:
PC Camera Function:
Charge:
Resetting:
Limited Warranty
Technical Service:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

imperial Spy Alarm User Guide

imperial Spy Alarm

Basic Instructions:

5 buttons: HR, MIN, SET, LIGHT, TALK/SNZ.
The hours and minutes are displayed on the 3.5″ LCD screen. You can alternate between the 12/24 hour formats.
It has different types of alarms and 5 melodies.
The alarm will sound every 10 minutes if the clock is in the “snooze” mode. At most, it will be repeated 6 times.
The “beep” will become increasingly more intense and will last for a maximum of 1 minute.

Control Instructions:

Turn on the alarm clock with the ON button. The screen will light up after the melody ends. The clock will show the set time.
Press the “Set” button to alternate between the different adjustments modes. They are set in this sequence:
Time Alarm
Press the “HR” button (in the Time mode) to select the hour. Press the “MIN” button (in the Time mode) to select the minutes.
Press the “HR” button (in the Alarm mode) to select the hour. Press the “MIN” button (in the Alarm mode} to select the minutes.
Press the “SNZ” button when the alarm is ringing to snooze the alarm 10 minutes.
An alarm symbol will flash in the “Alarm in an hour” mode.
The setting in this mode is started by pressing the “HR” button. You can activate and deactivate the alarm sound with the “MIN”
In the “Time” mode, by holding down the “HR” button, you can select the 12/24 format. The alarm sound is changed by pressing the “MIN”
You can change the backlight, in any mode, by pressing the “LIGHT” button.
The time can be reproduced by voice, in any mode, by pressing the “TALK” button.

Product Operation:

The alarm clock has a 30 frames (640×480 – 1280×960) resolution for video recording. It allows you to record video, sound, take pictures, internal storage in addition to its alarm function.
With the full battery charge:
Video recording: 12 hours
Audio recording: 25 hours
It is designed with multiple languages to give the current time.
It allows storage of up to 32GB

Remote Control:

Open the rotating side of the alarm clock. Insert the TF card and turn on the alarm clock with the ON button.
Use the remote control to turn on the alarm clock. A blue light will turn on to confirm that the alarm clock is active.
Press on the “Camcorder” icon to start recording the video. The recording will be started after the blue light flashes 3 limes and then turns off. To stop ii, press the “Camcorder” button again. The video will be saved and the alarm clock will return to the “Sleep” mode with the blue light on. The predetermined time for the video recording is 20 minutes.
Press the “Microphone” button to record the audio. After the blue light flashes once and stays on, the audio will start recording.
Press the button again to stop the recording and save the file. The predetermined time for the audio recording is 20 minutes.
Press the “Camera” button to enter the picture mode.
Press it again to take the picture. When you press the button, the blue light will flash, and then ii will return to its normal state.
Press the “Man” button to start the motion detection mode. The blue light will flash fast. If motion is detected around, the light will flash slower twice and the alarm clock will start recording the video. If motion is not detected, the blue light will flash quickly again. The predetermined setting of the video file is 3 minutes.
Press the “ON” button to turn off the alarm.
When the switch is on “ON”, connect the USB cable and press “ON”. The alarm clock will enter the U-DISC mode.

PC Camera Function:

Install the software through the alarm clock driver. Turn on the device and press the “ON” button on the remote. Connect the USB cable to the computer and immediately the image will be displayed on the PC.

Charge:

Set the switch to “OFF”. Connect the USB cable; a red light will turn on in the alarm clock indicating the charging status. When the battery is full, the red light will go off .

Resetting:

If the product stops working for some reason, alternate the power switch between the OFF and ON mode to reset it.

When the battery is low, the blue light or the screen has low intensity, charge the alarm clock. If ii turns off Completely, the files will be saved.

Limited Warranty

✓This product is guaranteed for 2 years from the date of purchase.
✓ Warranty is effective since the commercial invoice duly is filled and sealed settlement.
✓ If there is any problem with the product, the user should contact us in the adress: sat@imperiieleclronics.com. Once received, the doubts, incidents and problems will be resolved by email. If this is not possible and the problem persists, the guarantee will be processed in accordance with current law.
✓ The warranty is extended for two years, referring only 10 manufacturing defects
✓ The expedition to the nearest service center or our central office lo be made prepaid. The item must arrive well packed and with all its components.
✓ Assume no liability for damages arising from misuse of the product
✓ The warranty does not apply in the following cases: