imperii Sunrise Wake-Up Instruction Manual

June 7, 2024
imperii electronics

imperii Sunrise Wake-Up Instruction

imperii-Sunrise-Wake-Up-Instruction-Clock

Function

a) Led time display in 12-hour or 24 hour format
b) White light and color light
c) Sunrise simulation wake-up light
d) Sunset simulation sleep light
e) Touch to control the light
f) Natural sound and FM radio as alarm sounds
g) FM radio
h) Power supply: DC 5V or 2xAAA batteries

Overview

imperii-Sunrise-Wake-Up-Instruction-Clock-Overview

Operation

3.1 PLACE THE WAKE-UP LIGHT 16-20 in/40-SOcm from your head, for example on a bedside table.

3.2 POWER
3.2.1 Connect with DC Sv power, after 1 second will enter the clock setting mode.
3.2.2 Insert 2xAAA batteries, after 1 second will enter the clock setting mode.

3.3 SETTING THE CLOCK TIME
3.3.1 You have to set the clock time when you plug in the appliance for the first time and when there has been a power failure.
3.3.2 The hour indication starts to blink and you can adjust hour/minute by press . Press to confirm clock time.
3.3.3 Choose between a 12-hour and 24-hour clock by press . When the 12-hour time format is selected, Am or PM will be displayed.
3.3.4 Press to adjust the intensity of the display: Low – High – Off.
3.3.5 When powered by 2xAAA batteries, time display will automatically disappear in 5 seconds, you can press any of to resume the time display.

3.4 LIGHT
3.4.1 First touch to switch on white light and use it as a bedside lamp. You can adjust the white light intensity by touch total is 10 levels.
3.4.2 Second touch can enter into automatically color changing mode and use it as a mood light. You can touch button to select color from Green, Red, Blue, Purple, Orange, Indigo.
3.4.3 Third touch can switch off the light.

3.5 SETTING THE ALARM/WAKE-UP TIME
3.5.1 Press if you want to switch the alarm on or off. The alarm symbol appears on the display when you switch on the alarm.
3.5.2 Long press  seconds to set the alarm, the hour indication starts to blink and you can adjust the alarm time by press . Press to confirm set alarm time.
3.5.3 Press then press to choose between 1 and 7 as a wake-up sound (1-6 are pre-set natural sound, 7 is FM radio). If switching between 1 and 6 as a new alarm sound, a preview of that sound will be played for 10 seconds, while switching 7 as a new alarm sound, will not play and your last FM radio frequency will be as wake-up sound.
3.5.4 You can choose wake-up sound volume level between 00 and 15 (default is 10) by press up to 15, then from 15 to 00.

3.6 SUNRISE SIMULATION WAKE-UP LIGHT, ALARM, SNOOZE
3.6.1 Powered by DC 5V 30 minutes before alarm time, the sunrise simulation white light will be from 10% to 100% intensity at alarm time to prepare our body for waking up and getting alert.
At alarm time the wake-up sound will play for 2 minutes.
During wake-up sound playing, can press enter the snooze mode, wake-up sound will play again after 5 minutes and last for 2 minutes. Press any button except to stop sound.
During wake-up period, you can switch off wake-up light by long touch 3 seconds.
3.6.2 Powered by 2xAAA batteries
No light function.
At alarm time, the wake-up sound will play for 2 minutes, can press enter the snooze mode, wake-up sound will play again after 5 minutes and last for 2 minutes, and can stop sound by press any button except .
3.6.3 If FM radio is working, at alarm time, the wake-up sound will play instead of FM radio; FM radio resume after wake-up sound is stopped.

3.7 SETTING THE SUNSET/SLEEP TIME
3.7.1 Press to switch sunset on or off, the sunset symbol appears on the display when you switch on, 1t ct1sappears when you switch off.
3.7.2 Long press to set the alarm, the hour indication starts to 1:>11nk an you can adjust the alarm time by press . Press to confirm the sunset time.

3.8 Sunset simulation SLEEP LIGHT
30 minutes before sunset time, the sunset simulation white light will be on at 100% intensity whatever at any mode, and then will become lower and lower intensity until turn off at sunset time.
During sunset light period, you can switch off sunset light by long touch 3 seconds.

3.9 FM RADIO
3.9.1 Press “FM” to switch on/off the FM radio. Long press “FM” or scan radio frequencies automatically and scanned frequencies will be saved automatically.
Press to select frequencies.
3.9.2 You can choose FM radio volume level
between 00-15 by press up to 15, then from 1 5 to 00.
TIP: to get a good radio signal, fully unwind antenna and move it around until you receive the best reception.

WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR INJURY TO PERSONS

4.1 Never use the appliance if the lamp housing is damaged, broken or missing.
4.2 Heed all warning.
4.3 Do not look directly at lighted lamp too long.
4.4 If the appliance, power supply cord or cord has been damaged in any way, liquid has spilled or objects have fallen into the appliance, the appliance has been exposed to rain moisture, do not operated.
4.5 Read this user manual carefully before you use the appliance and save it for future reference.
4.6 This appliance is for indoor use only.
4.7 The appliance has no on/ off switch. To disconnect the appliance from the power source, remove the plug from the wall outlet.
4.8 Storage in dry place and take off batteries if not use for a long time.
4.9 Don’t press two or more keys at the same time.
4.10 If there is any malfunction, please unplug the unit for 3 seconds.
4.11 To avoid failure, interval of every touch must be more than 1 second.
4.12 If powered by 2xAAAbatteries, when plying FM radio, it will return back time display if lower power. Please replace AAA batteries

TECHNICAL SERVICE :http://imperiielectronics.com/index.php?controller=contact

imperii-Electronics-Logo

imperii Sunrise Wake-Up Instruction Manual – Download [optimized]
imperii Sunrise Wake-Up Instruction Manual – Download
imperii Sunrise Wake-Up Instruction Manual – OCR PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

imperii electronics User Manuals

Related Manuals