imperii Reloj RPM LED Watch User Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii Reloj RPM LED Watch
SETUP MODE
Button 1: Upper
Button 2: Lower
TIME CHANGE
TIME:
– Press button “2” twice to change the time. With button 1 select the
time of day. Depending on the pulsations, you will be able to choose the “AM”
-“PM” zone.
MINUTES:
– If you just changed the lime, press button 2 once.
If time has passed and the watch has returned to the initial state, press
button “2” 3 times to change the minutes. The outer sphere indicates the
minutes from 5 to 5. Within the sphere, 1, 2, 3 and 4 complete the minutes.
CHANGE OF DATE:
The date format step by step is that of MONTH I DAY I DAY OF THE WEEK
DAY:
– If you just changed the minutes, press button “2” once.
If time has passed and the watch has returned to the initial state, press
button “2” 4times.
– Select the day with button 1. Press button 2 to confirm.
MONTH:
– If you Just changed the day, press button “2” once.
If time has passed and the watch has returned to the initial state, press
button “2” 5 times.
– Select the month with button 1. Press button 2 to confirm.
DAY OF THE WEEK:
– If you just changed the month, press button “2” once.
If time has passed and the watch has returned to the initial state, press
button “2” 6 times.
– Select the day of the week with button 1. Press button 2 to confirm
LIGHT BRIGHTNESS:
– There are four brightness modes for the watch numbers.
If you just changed the day of the week, press button “2” once.
If time has passed and the watch has returned to the initial state, press
button “2” 7 times.
– Select the light brightness you prefer
EFFECT TURNED ON:
Different playing modes can be selected to check the time on the watch.
– If you just changed the light brightness, press button “2” once.
If time has passed and the watch has returned to the initial state, press
button “2” 8 limes.
– Select the effect you prefer
CONSULT THE TIME:
Consult time: Press button “1” once.
Consult dale: Press button “1” twice.
Consult day of the week: Press button “1”three times.
Limited Warranty
- This product is guaranteed for 2 years from the date of purchase.
- Warranty is effective since the commercial invoice duly is filled and sealed settlement.
- If there is any problem with the product, the user should contact us in the address: sal@imperHelectronics.com. Once received, the doubts, incidents and problems will be resolved by email. If this is not possible and the problem persists, the guarantee will be processed in accordance with current law.
- The warranty is extended for two years, referring only to manufacturing defects.
- The expedition to the nearest service center Of our central office to be made prepaid. The item must arrive well packed and with all its components
- Assume no liability for damages arising from misuse of the product
- The warranty does not apply In the following cases:
- If you have not been followed this manual correctly
- If the product has been tampered
- lf it has been damaged by improper use
- If the defects have arisen as a result of power failures
PRODUCT: ____
MODEL: _____
SERIE: __
SERCIVE CENTER: http://www.imperiielectronics.com/contactenos
imperii Reloj RPM LED Watch User Manual – Download
[optimized]
imperii Reloj RPM LED Watch User Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>