imperii SmartWatch Bluetooth Sphere User’s Manual

: June 7, 2024
: imperii electronics

imperii SmartWatch Bluetooth Sphere User’s Manual

imperii SmartWatch Bluetooth Sphere

Safety warnings

Please read care fully this user’s manual before using your SmartWatch.
Use the suppl led battery, charger and accessories exclusively. The manufacturer shall not be liable for any damages derived from third-party accessories.
Any non-authorised unmount of the SmartWatch is strictly forbidden. Any non-authorised unmount shall imply a guarantee void.
Do not expose it to vibrations or shocks. Do not hit the screen with metal objects.
Do not use solvents like benzene to clean the shell. Avoid contact with corrosive chemical agents. Use a clean, smooth cloth for cleaning.
Do not expose your SmartWatch to direct sunlight or dusty or smoky environments.
Keep your SmartWatch dry. Do not use it in humid environments like a bathroom. It is not waterproof, rain and humidity can affect it.
Please keep your SmartWatch out of children’s reach.

1. INTRODUCTION

SmartWatch Components

Loudspeaker
USB port
On/Off button//Back button.
Hang/back button
Volume
Menu

imperii SmartWatch Bluetooth Sphere

WATCH FUNCTIONS

You can use its Bluetooth connectivity for synchronizing music, calls, call historical and agenda from your iPhone or Android phone. You can also synchronize your Android smartphone notifications including SMS, e-mail, Skype, Twitter, Whatsapp, etc. It also includes alarm, agenda, MP3 player, pedometer and remote camera among other features.

Power on and main interface

1. SmartWatch power on and off:

To power on your SmartWatch, keep pressed for a few seconds its main button, which is located on the left side of the SmartWatch. The SmartWatch powers on with a melody and a welcome image on the screen.
To power the SmartWatch off, press again its main button for a few seconds. The SmartWatch powers off.
Note: Make sure the SmartWatch is charged. If the terminal does not power on, then then most likely its battery is depleted.

2. Main interface:
In the main interface appear time (in digits by default you can change the main interface in the SmartWatch menu), date, battery status, Bluetooth (if it’s on), sound (when connected via Bluetooth to your smartphone, a headset icon appears on screen, which indicates it will play sounds on notification reception).

To access the menu: Slide a finger on the SmartWatch screen from right to left or tap on the touch panel to access the menu. Navigate the menu by sliding a finger from right to left to go to the next page and from right to left to go to the previous page.
Quick accesses: You can use various functions with a quick access gesture. On the main screen, slide a finger from left to right to connector disconnect the Bluetooth device (a disconnect confirmation will be requested). Within the apps, slide a finger from left to right to go back in the menu. To quickly get back to the main interface, tap shortly on the power on/off/exit button.

Bluetooth, Agenda, Dial, Messages.
Call registry, Notifications, Music, Remote Camera.
Settings, Anti-loss, Energy Saving, Dial Tone.
Barometer, Altimeter, Pedometer, Stopwatch.
Menu style, Clock, Phone Search, Date and Time.

Bluetooth

In the menu you’ll find the Bluetooth icon. Open the app to access settings (visibility on/off, power Bluetooth on/off, rename device) or access the linked devices list. If connecting for the first time, select “Find new device”, wait until it appears on the list, select it and accept linking from both devices. From now on they will link automatically when both of them have Bluetooth on.
NOTE: To connect the SmartWatch to your smartphone, you have to link from the SmartWatch. If your link from your phone, you may get an error message.

Pedometer, Sleep Monitor, Physical Inactivity Alert

Activate the pedometer to start counting steps. For a measurement that best fits your profile, enter your weight and average stride length so that the SmartWatch can perform an approximate calculation of the distance made (based on the steps taken) and the number of burnt calories.

Audio Player

Play and control the music in your smartphone from the SmartWatch. Select a proper volume for your music to avoid ear injuries.

INSTALLING THE APK (available only for Android)

For the synchronization service to work (and therefore receive notifications from your smartphone in your watch, as well as pedometer and sleep data) first you have to install an APK. This option is available only for Android smartphones.

To download this APK, scan the two-dimensional code that appears on the SmartWatch when you open any app that requires this program to execute (SMS, notifications, remote camera … ) This code starts the download of the app.
After installing the app, register your phone. On the main interface, go to “accessibility” after clicking OK in the message that appears (click also “don’t show me again-to permanently dismiss the message)and activate the “SmartWatch” option. On the main interface click then on the “Unbound” button located in the upper right comer. Activate Bluetooth in your smartphone and open your SmartWatch Bluetooth, click on “search new device” and wait until your smartphone appears in the list. Once it’s listed, click on its name to start linking, accept the link in your smartphone and then you’ll be linked with the SmartWatch.
Now you can receive pedometer and sleep metric data in your mobile app, and notifications in yourSmartWatch. If you have problems with the application, we suggest you try an alternative apk called “smart watches”. You will find the QR code to download and use manual at the following address: http://www.imperiielectronics.com/manual-user.html

SMARTWATCH USAGE WITH i0S

An app for iOS has not been developed which includes remote notification service for independent SmartWatches, therefore iPhone functionality is limited.
You can use most of the SmartWatch features by linking it with your iPhone via Bluetooth. However, you can neither receive notifications nor use the following features, which need to have the app Installed:

SMS (access to the iPhone SMS trays)
Remote Notifier
Remote Capture

TROUBLESHOOTING

Should any problem arise when using your SmartWatch, follow these instructions. If the problem persists, contact your distributor or an authorized technical support.

The SmartWatch does not power on.

Push the power on button until the start-up screen appears If it does not power on, your battery may be depleted. Check your battery charge level or let it charge before trying to power on your SmartWatch again.
Remember : The battery of this device cannot be removed. After long periods without charging, it Is possible that the battery depletes even though it has not been used. For an optimum care of the battery, do not let your device unused for long periods of time and keep the battery charged.

The watch freezes for several minutes

Push the power off button and restart the device.
If it does not respond, use a small object (e.g. a clip) to reset the
SmartWatch. The reset button is located in the rear side of the device.

Battery life Is too short

Make sure you charge your battery for a long enough time (more than three hours).
If you do not fully charge your battery, the charge indicator might not be accurate. Please wait for up to 20 minutes after disconnecting the battery charger to get an accurate reading of the battery status.

I cannot dial from my SmartWatch

Make sure the phone number is correct and push the call button.
Please check your phone network works properly.
Make sure you have enough balance in your card (in case it is prepaid).
Check with your service provider to make sure your account is OK (credit limit, SIM validity, etc.).
Make sure you have not established a call limit.
Check your phone is not configured for using numbers from the agenda exclusively.

I cannot synchronize my SMS

Make sure you have downloaded and installed the APK app in your Android phone (it does not work on iOS).
Check you have activated the Bluetooth notification feature.

IMPORTANT REMARK I:

Smartphone apps are constantly subject to changes and updates to include improvements in options, functionality, usability and stability of the apps. During this change process, errors can arise in the apps. You can leave us suggestions about your user experience to help us improve.

IMPORTANT REMARK II:

You cannot configure this SmartWatch for Spanish language. You can use it in English.

Limited Warranty

✓This product is guaranteed for 2 years from the date of purchase.
✓ Warranty is effective since the commercial invoice duly is filled and sealed settlement.
✓ If there is any problem with the product, the user should contact us in the adress: sat@imperiieleclronics.com. Once received, the doubts, incidents and problems will be resolved by email. If this is not possible and the problem persists, the guarantee will be processed in accordance with current law.
✓ The warranty is extended for two years, referring only 10 manufacturing defects
✓ The expedition to the nearest service center or our central office lo be made prepaid. The item must
arrive well packed and with all its components.
✓ Assume no liability for damages arising from misuse of the product
✓ The warranty does not apply in the following cases:

If you have not been followed this manual correctly
If the product has been tampered
If it has been damaged by improper use
If the defects have arisen as a result of power failures

PRODUCT__
MODEL____
SERIES____

TECHNICAL SERVICE : http://imperiielectronics.com/index.php?controller=contact

imperii SmartWatch Bluetooth Sphere User’s Manual – Download [optimized]
imperii SmartWatch Bluetooth Sphere User’s Manual – Download
imperii SmartWatch Bluetooth Sphere User’s Manual – OCR PDF