imperii Mars Bluetooth SmartBand User Manual

June 7, 2024
imperii electronics

imperii Mars Bluetooth SmartBand

Appearance Introduction

imperii-Mars-Bluetooth-SmartBand-illustration

Attachments with Product

imperii-Mars-Bluetooth-SmartBand-illustration

Instructions for the first user

  • Install the APP: “verify 2.0” from App store/ Android Market
    Android-device-illustration

  • Enter the APP to find the device interface binding equipment.

Note: The product has been installed and is in standby mode. Binding can.

Function description

  1. Sleep Mode Tracking
    Automatic access to sleep monitoring mode.

  2. Sync Mode
    App sends synchronization command, enter the synchronization mode, LED flash

  3. Remote self timer
    Enter the self timer, equipment 12 point position lights flashing, rotating the wrist to shoot.

  4. NFC Access card
    Please go to the property or the Public Security Bureau for the record store to be written to the required access control system.

About the LED Indicators

  • Show the time by wrist 90″invert.(The clock on all the time, the minute hand flash three times)
    hand-wearing-smartband-illustration

  • Display the Completion Progress: Time display, the completion of the moving target display. Here are 12 LED Lights, from Oto 12 will display the percentage of completion progress of target.
    imperii-Mars-Bluetooth-SmartBand-illustration

  • Connection/Disconnection: The four lights twinkle at the same time when connection or disconnection.
    imperii-Mars-Bluetooth-SmartBand-illustration

  • Data Synchronism: Synchronous tip: Lights gradually twinkle from 12:00 in clockwise.
    imperii-Mars-Bluetooth-SmartBand-illustration

  • Calling alert: 6 points from the two direction of the flash, light 3 lights to advance, the cycle of 30 seconds
    imperii-Mars-Bluetooth-SmartBand-illustrationcircle

  • Take the photo: enter the photo and prepare the l2 point position. LED lights flashing.
    imperii-Mars-Bluetooth-SmartBand-illustration

  • Battery Replacement
    imperii-Mars-Bluetooth-SmartBand-illustration

  • Basic parameters
    Main weight:| 39g
    ---|---
    Data :| Bluetooth 4.0
    Battery type:| Lithium battery
    Battery capacity:| 210mAh
    Working temperature:| -10’50°C
    Waterproof| yes
    Watch length:| 245mm
    Strap material:| skin

  • Android4.3 and above, Bluetooth 4.0

  • iPhone 4s and above, IDS 7.0 and above

TECHNICAL SERVICE :http://imperiielectronics.com/index.php?controller=contact

imperii-Electronics-Logo

imperii Mars Bluetooth SmartBand User Manual – Download [optimized]
imperii Mars Bluetooth SmartBand User Manual – Download
imperii Mars Bluetooth SmartBand User Manual – OCR PDF

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

imperii electronics User Manuals

Related Manuals