imperii RR FIERRO SmartBand Maus Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii RR FIERRO SmartBand Maus Instruction Manual
Download Application
Before connecting the wristband, please make sure that it is switched on and
that the Bluetooth on your Smartphone is activated.
The name of the application is “UETON”. Look for “UETON” in the App
Store or on Google Play, or scan the QR code below:
Androi d
iOS
How to wear the bracelet
The best position to wear the bracelet is next to the styloid of the ulna.
Please make sure that the sensor stays close to the skin and prevents it from
moving.
TURN ON, TURN OFF
Touch the screen for more than three seconds, and the bracelet will light up
with a vibration and the display will light up.
With the bracelet on, touch the screen for more than three seconds to switch
to off mode, select “off” keeping it pressed the bracelet will turn off.
Selecting “on” and holding it down will return you to the main screen.
Using the device
IMPORTANT: When connecting the device for the first time, make sure it is
connected to the APP/ APK and the date and time are updated automatically.
Open App- > Device-> Slide-> Binding
When the wristband and the phone are connected successfully you will
automatically start recording and analyzing all your exercise and sleep data,
showing these data in the APP; When unplugged, the device can display date and
time on the screen equally, and save data for up to seven days.
Once the device has connected to the mobile you will see a BT Icon on the
screen.
Heart Rate Test
When you move the display to the heart rate interface, press and hold the
touch screen. The heart rate icon will blink while the LED heart is turned on.
This means that you have started your heart rate test and you will get results
in about 30 seconds. You can also connect to the APP and give “Start” to start
the heart rate test.
Heart rate display [Test Result)
Tips: When performing the test, make sure that the heart rate sensor is close to the skin and without any external light that could affect the accuracy of the test. The area where the test is performed should be clean, sweat and dirt can affect the results.
Main Functions
Standard Sports Function (steps, distance, calories)
|
Shake to take pictures
---|---
Antl-lost alarm (alert when the phone goes out of range)
|
Message Notification (you can add more)
Sleep monitor (duration and quality of sleep)
|
Configuring sport goals, disseminating sports information
Sedentary alarm (in iOS default in 1 hour)
|
Restart factory settings
Call notification
|
Firmware update
When the phone receives incoming calls or messages, the device vibrates
Tips for Android users:
- Open the smart unlock function: it automatically locks the screen when the phone is away from the bracelet, and unlocks it when it is close, although this function is only supported by some Smartphone models.
- When using the anti-lost function you will need to accept the request that appears in the app of your mobile.
- When using message notification, you must allow the app to work in the background.
- We suggest that the app be added to the trusted list or applications in the configuration of your phone
Charging
Please connect the device with the charging cable as shown in figure 1,
the charging part must fit into its holes as shown in figure 2, and the
USB output to the corresponding port.
FIGURE 1
FIGURE 2
Tips
- Please do not bring your device to showering or swimming.
- Data only for reference, the device can not replace a medical device.
- Please perform the tests at a normal temperature.
- Connect the device to synchronize the data.
- Please charge the device with its original charger.
- Do not expose the device to excessive humidity or extreme cold or heat.
- If the device does not work, please clean the phone memory or exit the App and re-enter.
- The pedometer will start working the first time you manually connect the APP with the device, you will not need to activate it later.
- The device will vibrate when connected to the charger with a current greater than 2V; If it is less than 2V the bracelet will not send any alerts when connecting to the charger.
- When the device is charging the touch screen will auto-calibrate itself and will fail moderately. After 10 seconds it will return to normal operation.
Package contents
- Smart bracelet
- Charger
- Manual
Basic Parameters
Display: OLED
|
Battery Type: Lithium Polymer
---|---
Operating temperature: -10oC to 50oC
|
Synchronization Method: Bluetooth 4.0
System Requirements
Android: Smartphone that supports Bluetooth 4.0 and with system Android
4.3 or higher and Wechat 6.0 or higher.
iOS: All iPads and iPhones with iOS 8.0 or higher, Wechat 6.0 or higher.
Technical Service:
Visit: http://www.imperiielectronics.com/contactus
imperii RR FIERRO SmartBand Maus Instruction Manual – Download
[optimized]
imperii RR FIERRO SmartBand Maus Instruction Manual –
Download
imperii RR FIERRO SmartBand Maus Instruction Manual – OCR
PDF