imperii Bluetooth Music Mask Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
- CHARACTERISTICS
- TECHNICAL SPECIFICATIONS
- BUTTON AND CABLE FUNCTIONS
- OPERATION
- SWITCHED ON
- OFF
- Wireless transmission through device
- Actions with the phone
- Save mode
- Low battery warning
- Using the USB cable
- NOTES
- Included Accessories
- TECHNICAL SERVICE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
imperii Bluetooth Music Mask Instruction Manual
CHARACTERISTICS
- Version 4.1 of Bluetooth, compatible with most devices that support Bluetooth connection.
- Elastic material and velvet. Relax your eyes when you decide to take a break, while traveling, etc.
- The mask can be washed.
- Built-in microphone. Diverts the audio from your phone to the device and responds directly to your calls without using your hands.
- Built-in rechargeable Li-ion battery. It recharges through a USB cable and provides a long standby time.
- Displays the remaining battery in iPhone devices.
TECHNICAL SPECIFICATIONS
Bluetooth
|
V4.1+ EDR
---|---
Frequency
|
2.402GHz – 2.480GHz
Transmission distance
|
10m
Microphone Transmission Distance
|
< lm
Rechargeable lithium battery
|
130mAH, 3.7V
Charging time
|
1-2 hours
Standby time
|
about 360 hours
Continuous playback time
|
between 6-8 hours
Identification of the device for synchronization
|
BT music
BUTTON AND CABLE FUNCTIONS
- VOLUME/ PREVIOUS SONG
- ON/ OFF/ PAUSE/ ANSWER/ CALL/ RECALL
- VOLUME / NEXT SONG
OPERATION
Plug the charging cable into the mask from the micro USB side and into the computer from the USB side. The LED light will turn red immediately. When this light is off, the device is fully charged and you can unplug the cable.
SWITCHED ON
Press for 3 seconds. The device will be activated as soon as the blue LED light flashes slowly.
OFF
Press for another 3 seconds. The device will turn off when the LED is off.
Wireless transmission through device
- Synchronize and connect: Press for 5 seconds and locate the Bluetooth device identified as “BT music” to proceed to synchronization. The LED light will blink red and blue alternately. When the LED turns blue, the synchronization will be successful.
- Automatic reconnection: Your device will automatically reconnect as long as the pairing is not canceled.
- Automatic Search: The device performs an automatic search when disconnected from the computer or phone.
- Transmission/ Pause: Once the transmission is in progress, press to pause the song and once more to let it continue.
- Previous song: Press once.
- Next song: Press once.
- Reduce Volume: Hold down the button while the volume is reduced.
- Volume Up: Hold down the button while the volume increases.
Actions with the phone
- Answer call: press to take the phone.
- Hang up: press once more to hang up.
- Redial: Press twice to recall the last number registered to the phone.
Save mode
The device will automatically shut down after more than 3 minutes if there is no synchronization with another device.
Low battery warning
An audible alarm during playback will indicate that there is insufficient charge and that you need to charge the device.
Using the USB cable
- TO THE PORT OF 5 PINES MICRO USB
- TO USB PORT (USB FEED)
NOTES
- Keep the device away from alkaline or acidic materials.
- Always store in a dry place.
- Keep it clean and use a desiccant after use.
- Remove headphones and other electronic parts before washing.
- Do not disassemble, repair or modify the device on your own.
- Do not throw or drop it.
Included Accessories
- 1 x Bluetooth Music Mask
- 1 x User manual
- 1 x USB Charging Cable
TECHNICAL SERVICE
Visit: http://www.imperiielectronics.com/contactus
imperii Bluetooth Music Mask Instruction Manual – Download
[optimized]
imperii Bluetooth Music Mask Instruction Manual –
Download
imperii Bluetooth Music Mask Instruction Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>