imperii SmartWatch Dynamic Rings User Manual

imperii SmartWatch Dynamic Rings User Manual

Product overview

Charging diagram

1. Line de special charging clip with the bracelet, and plug the other end in the USB port of your computer, or the phone’s charging adopter. Please, remember not to charge it with an output higher than 2A. It could burn the chip and the bracelet would not charge anymore.
2. When charging the bracelet, please do not hold it the other way round. Make sure you clip it following the images beneath.
   

Instructions for bracelet touchscreen operation

1. This product is compatible with single-touch operation, the tactile area is at the bottom oft he bracelet display.
2. Single touch to change the bracelet interface, keep pressed to select/confirm.

Installation of the bracelet’s App

This is a Bluetooth product, many functions need to be linked to the proper application for you to use them. Other functions are only available after you pair the bracelet with the app. (Android mobiles should not directly connect the bracelet via phone’s Bluetooth).
Scan the QR code below to download the application to pair. For Apple mobiles, you can search Hero Band Ill in the App Store to download.

Google Play

App Store

Instructions to pair the bracelet

• Open mobile client to set the personal info.
• Go to [Device] and click on [Pair device].
• Click on your device on the scanned devices list.
• Pairing completed.

Quick introduction to bracelet functions

In the main Time page of the bracelet, you can see the actual time, Bluetooth connection status, etc. Keep pressing to enter and see the MAC address of the bracelet, and keep pressing again to choose shut off.

• Daily data:
  It shows the number of steps, sleep, and a progress bar of heart rate in the actual bracelet. Keep pressing to enter and see the details.

• Sleep:
  The bracelet can track and how the total duration of your sleep, as well as the phases of deep and light sleep.

• Blood pressure:
  Keep pressing this page to test your present blood pressure.

• Sports information:
  the bracelet can track and show the number of steps, calories bu med, and the information of distance (in kilometres) walked every day.

• Heart rate:
  Keep pressing this page to test your present heart rate.

• Blood oxygen:
  Keep pressing this page to test your present blood oxygen.

• Fitness:
  Keep pressing this page to enter and select the proper sports mode to track the information. Last day’s data can be shown in this page.

• Music control:
  after connecting with the App, the bracelet can control the mobile’s music player to play/pause/previous/next. This function requires opening the music player in the phone first.

• Message notification:
  The bracelet can receive notification reminders, such as calls, messages, social media, etc. In your mobile,you need to open the corresponding switches on the application. This page can store the last three messages. Remember this function requires the bracelet to be connected with the app, and complete the settings as indicated.

• Remote camera:
  after connecting with the App, the bracelet can be used as a remote control for the mobile phone’s camera. Open your mobile’s camera and press-and-hold the bracelet touchscreen to take pictures remotely.

• Weather information:
  It shows the present weather conditions. This function requires being connected to the app, and the mobile phone must have the GPS positioning on, and give permission to obtain its location. If you disconnect the device, or shut off the GPS for a long time, the weather information cannot update.

• Configuration:
  Press and hold this page to enter and choose the other functions settings, such as stopwatch/ silence / adjust brightness, etc.

• Brightness adjustment:
  Press and hold this page to enter and set the screen brightness. Press once for a level, and press and hold to confirm changes.

• Stopwatch:
  Press and hold this page to start the stopwatch, and press and hold it again to stop it.

Use instructions

1. Enter the fitness page in the App, press and hold the phone screen to slide down and refresh, it will synchronize bracelet data.
   

2. Click on pedometer,sleep or other blocks to enter and see the activity or sleep data of the day, or the recent period.
   

3. Click on Heart rate/ Blood pressure to enter and see the data of the day or the recent period. You can also click on heart rate or blood pressure in the App. The registered data will be saved automatically in the phone.
   

Caution

1. It is forbidden to charge in case of water drops.
2. This product is only an electronic monitoring device, and it is not used for any medical purposes. Data is only for reference.
3. You cannot use the bracelet when bathing in hot water, or swimming for a long time.

Frequently asked questions

The bracelet cannot receive any reminders.
Configuration for Android:

1. Make sure the notification reminder switch is open in the app.
2. Confirm is messages show normally in your notification bar on the mobile phone, since the bracelet receives those messages reading them from the mobile’s notification bar.
   (You must activate the notifications bar and the status bar for calls, messages and social media in the phone settings).

Configuration for Apple:

1. Make sure you can choose the device to pair, and that you can see it in the Bluetooth settings of your mobile. If you find” “when connected, it will mean it has been paired successfully.

The Android phone can’t connect to the bracelet.
EI Android mobile shouldn’t connect directly via the mobile’s Bluetooth. Download the proper app and pair with it. You can re-open the mobile’s and bracelet’s Bluetooth if necessary.

Technical Service

Visit: http://www.imperiielectronics.com/contactus

imperii SmartWatch Dynamic Rings User Manual – Download [optimized]
imperii SmartWatch Dynamic Rings User Manual – Download
imperii SmartWatch Dynamic Rings User Manual – OCR PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>