American Audio APX12 GO BT User Manual
- June 7, 2024
- American Audio
Table of Contents
American Audio APX12 GO BT
**CONTACT INFORMATION**
©2021 ADJ PRODUCTS LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ logo and identifying product names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ brands and product names are trademarks or registered trademarks of their respective companies.
ADJ PRODUCTS LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.
ADJ PRODUCTS LLC USA 6122 S. Eastern Ave. Los Angeles, CA 90040 323-582-2650 | Fax 323-832-2941 | www.adj.com | info@adj.com
ADJ SUPPLY Europe B.V Junostraat 2 6468 EW Kerkrade, The Netherlands +31 (0)45 546 85 00 | Fax +31 45 546 85 99 | www.adj.eu | info@americandj.eu
ADJ PRODUCTS GROUP Mexico AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000 +52 728-282-7070 | ventas@adj.com
Energy Saving Matters (EuP 2009/125/EC) Saving electric energy is key to protecting the environment. Please turn off all electrical products when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you!
https://www.elationlighting.com/cuepix-16ip-dtw
DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated
version of this document may be available online. Please scan the QR Code with
your mobile device or visitwww.adj.com for the latest
revision/update of this manual, before installation and/or programming.
GENERAL INFORMATION
Introduction:
Congratulations and thank you for purchasing the American Audio® APX 12 GO BT professional battery-powered speaker. This speaker is a representation of American Audio’s continuing commitment to produce the best and highest quality audio products possible at an affordable price. The APX 12 GO BT is a 12-inch active speaker featuring battery power, Bluetooth pairing, flash drive playback, built-in FM radio, and an LCD screen. This speaker’s extremely high- efficiency design, low power consumption, and strong output power are ideal for small and mid-size events. The speaker includes a pole mount cup and an integrated trolley and handle. Please read and understand this manual completely before attempting to operate your new speaker system. This booklet contains important information concerning the proper and safe operation of your new speaker.
Customer Support:
American Audio® provides a toll-free customer support line, to provide set up
help and answer any questions should you encounter problems during your
initial set up or operation. You may also visit us on the web at
www.adj.com for any comments or suggestions. Service
Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.
Phone: 323-582-2650
E-mail: support@adj.com
Caution! There are no user-serviceable parts inside this speaker. Do not attempt any repairs without being instructed to do so by an authorized American Audio technician. Doing so will void your manufacturer’s warranty. In the unlikely event your speaker may require service, please contact American Audio®.
HANDLING
Electrical Precautions:
The lightning flash symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person or persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK COVER). THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICE TO YOUR AUTHORIZED AMERICAN AUDIO SERVICE TECHNICIAN
The exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS- All the safety and operating instructions should be
reviewed before operating the product.
RETAIN INSTRUCTIONS- The safety and operating instructions should be
retained for future reference.
HEED WARNINGS- All warnings on the products and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS- All operating and use instructions should be
followed.
CLEANING- The product should be cleaned only with a polishing cloth or
a soft dry cloth. Never clean with furniture wax, benzine, insecticides, or
other volatile liquids since they may corrode the cabinet.
ATTACHMENTS- Do not use attachments that have not been recommended by
the product manufacturer, as they may cause hazards.
WATER AND MOISTURE- Do not use this product near water for example,
near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, or in any other similar conditions.
ACCESSORIES- Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table that has been
recommended by the manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer’s instructions and should use a
mounting accessory that has been recommended by the manufacturer.
CART- A product and cart combination should be moved only with care.
Quick stops, excessive force, and uneven surfaces may cause the product and
cart combination to overturn.
VENTILATION- Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product, and to protect it
from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug,
or another similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered to.
POWER SOURCES- This product should be operated only from the type of
power source indicated on the product label. If you are not sure of the type
of power supply available, consult your product dealer or local power company.
LOCATION- The appliance should be installed in a stable location.
NON-USE PERIODS- The power cord of the appliance should be unplugged
from the outlet when left unused for a long period of time.
GROUNDING OR POLARIZATION
– If this product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other), it will fit into the outlet
only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still fail
to fit, contact your electrician to replace your obsolete outlet. NOT DEFEAT
THE SAFETY PURPOSE OF THE POLARIZED PLUG.
– If this product is equipped with a three-wire grounding-type plug (a plug
having a third pin for grounding), it will only fit into a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace your obsolete outlet. DO
NOT DEFEAT THE SAFETY PURPOSE OF THE GROUNDING-TYPE PLUG.
POWER CORD PROTECTION- Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at the plug, convenience
receptacles, and the point where they exit from the product.
OUTDOOR ANTENNA GROUNDING- If an outside antenna or cable system is
connected to the product, be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges and built-up
static charges. Article 810 of the National Electrical Code, ANSI/NFP A70,
provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of the antenna-discharge unit,
connection to grounding electrodes, and requirements for the grounding
electrode. See Figure A to the right for reference.
LIGHTNING- For added protection for the product during a lightning
storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning and power-line
surges.
POWER LINES- An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits.
When installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them might be
fatal.
OVERLOADING- Do not overload wall outlets, extension cords, or integral
convenience receptacles, as this can result in a risk of fire or electric
shock.
FUSE REPLACEMENT- Ensure that the main power is disconnected prior to
replacing the fuse. Replace the fuse only with a fuse of the same rating and
power, as described on the fuse panel.
OBJECT AND LIQUID ENTRY- Never push objects of any kind into this
product through openings, as they may come into contact with dangerous voltage
points or short-out parts that could result in fire or electric shock. Never
spill liquid of any kind of product.
SERVICING- Do not attempt to service this product yourself, as opening
or removing covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE- Unplug this product from the wall outlet and
refer servicing to qualified service personnel under the following conditions:
– When the power supply cord or plug is damaged.
– If liquid has been spilled, or objects have fallen into the product.
– If the product has been exposed to rain or water.
– If the product does not operate normally by following the operating
instructions. Adjust only those control that is covered by the operating
instructions, as an improper adjustment of other controls may result in damage
and may require extensive work by a qualified technician to restore the
product to normal operation.
– If the product has been dropped or damaged in any way.
– When the product exhibits a distinct change in performance, indicating a
need for servicing.
REPLACEMENT PARTS- When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer or
have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
SAFETY CHECK- Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to determine that
the product is in proper operating condition.
WALL OR CEILING MOUNTING- The product should NOT be mounted to a wall
or ceiling.
HEAT- The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
UNPACKING
Every APX12 GO BT has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your units for any damage and be sure all accessories necessary to operate the system have arrived intact. In the event that damage has been found or parts are missing, please contact our toll-free customer support number for further instructions. Please do not return the speaker to your dealer without first contacting customer support.
SAFETY
The APX12 GO BT speaker can easily reproduce sound pressure levels (SPLs)
sufficient enough to cause severe and permanent hearing damage. A great degree
of care should be taken to protect your ears from prolonged exposure to SPL in
excess of 85 dB.
– For adult use only. Keep out of reach of children.
– Be sure all power is turned off before connecting speakers.
– When using the speaker, always make sure the grille is attached.
– Always use a power cord that meets the manufacturer’s exact power
specifications.
– Disconnect from main power before making any type of connection.
– To reduce the risk of electrical shock or fire, do not expose this unit to
rain or moisture.
– This speaker is intended for indoor use only. Use of this product outdoors
voids all warranty coverage.
– Always mount this speaker in a safe and stable manner.
– Power Cord Protection Power supply cords should be routed so that they are
not likely to be walked upon or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and
the point at which they exit from the speaker.
– Heat The speaker should be situated away from heat sources such as
radiators, heat registers, stoves, or other mixers (including amplifiers) that
produce heat.
– Be sure to save the packing carton in the event that the unit needs to be
returned for service.
– Read all documentation before attempting to operate your new device. Please
save all your documentation for future reference.
– Do not spill water or other liquids into or onto your speaker.
– Be sure that the local power outlet matches that of the required voltage for
your speaker.
– Do not attempt to operate this speaker if the power cord has been frayed or
broken. Please route your power cord out of the way of foot traffic.
– Always have the gain controls set to their lowest level during the initial
power-up to prevent speaker damage.
– Servicing The user should not attempt to service the speaker beyond what
is described in this manual. All other servicing should be referred to
qualified service personnel. The speaker should be serviced by qualified
personnel when any of the following occurs:
o Objects have fallen onto or liquids have been spilled into the speaker.
o The speaker has been exposed to rain or water.
o The speaker does not appear to operate normally or exhibits a change in
performance.
o The terminal/cross-over plate has been damaged.
KEY FEATURES
– LCD Display
– MP3 Playback
– Wireless Pairing with Mobile Phone, Tablet, or Laptop
– FM Tuner
– SD Card Port
– USB Port
– Mini Jack Input (1/8″)
– XLR In/Out for PA or DJ Mixer
– UHF Handheld Microphone
– Remote Control
– Battery Power
– Built-in Wheels and Retractable Handle
INCLUDED ITEMS
– Power Cable (x1)
– UHF Wireless Microphone (x1)
– Remote Control (x1)
PRODUCT REGISTRATION
The APX12 GO BT carries a one-year (365 days) limited warranty. Please fill
out the enclosed warranty card to validate your purchase. All returned service
items, whether under warranty or not, must be freight pre-paid and accompanied
by a return authorization (R.A.) number. The R.A. number must be clearly
written on the outside of the return package. A brief description of the
problem, as well as the R.A. number, must also be written down on a piece of
paper and included in the shipping container. If the unit is under warranty,
you must provide a copy of your proof of purchase invoice. You may obtain an
R.A. number by contacting customer support at
323-582-2650. All packages returned to
the service department not displaying an R.A. number on the outside of the
shipping package will be returned to the shipper unopened.
The serial and model number for this unit is located on the rear panel. Please
write down the numbers here and retain them for future reference.
Model No.____ Date Purchased__
Serial No.____ Dealer Name
CONTROLS AND FEATURES
REAR PANEL
- LCD Screen
- TWS Button
- Mode Button
- Play/Pause Button
- Stop Button
- Repeat Button
- Skip Back Button
- Skip Forward Button
- Flash Drive Slot
- Battery Charge Indicator
- XLR Microphone Input
- MP3 Input
- 1/8″ Stereo Mini-Jack Input
- Left/Right Line Input
- XLR Line Input
- XLR Line Output
- MP3 / Volume Control
- Mic Input Volume Control
- Line Input Volume Control
- Wireless Mic Vol. Control
- Treble Volume Control
- Bass Volume Control
- Power Switch
- Power Inlet w/ Integrated Fuse
- Power Indicator Light
- Clip Indicator Light
REMOTE CONTROL
- Stop
- Switch Mode (USB / SD / Bluetooth)
- Mute
- Skip to Previous
- Skip to Next
- Play / Pause
- Decrease Volume
- Increase Volume
- Tone Level Control
- Number Pad
OPERATION
WIRELESS MICROPHONE
- Microphone Head
- Display Panel
- Power Switch
- Frequency Modulation
- Battery Cover
- End Cap
NOTE: Signal transmitter is housed in the End Cap. In order to minimize the risk of signal interference, avoid gripping the microphone by the end cap when not in use.
Connecting the Microphone Wirelessly to Your Speaker: 1. Check that the
microphone has been fitted with two (2) AA batteries. Switch on both the
microphone and the main power switch on the speaker.
2. Your wireless microphone and built-in receiver come preset from the
factory, but should the need arise to repair these devices, press and hold the
Frequency Modulation button on the microphone until the Display Panel
illuminates and flashes.
3. Wireless pairing should now be complete.
WIRELESS MICROPHONE
SAFETY WARNINGS!
– Do not expose to water or liquids of any kind!
– Do not expose to heat or fire!
– Do not use in locations with a high risk of signal interference, such as
airports or hospitals!
– Do not disassemble the product! There are no user-serviceable parts
contained inside this unit, and attempting any repairs yourself may void the
manufacturer’s warranty! Contact an authorized service representative for all
repair needs!
– If the product is not working as intended, or displays a noticeable change
in performance, please contact an authorized representative for any repair
needs!
Accessory Specifications:
WIRELESS PAIRING FOR MOBILE PHONES AND OTHER DEVICES
1. Ensure that or wireless pairing is enabled on the wireless device that is
being paired to the APX12 GO BT.
2. On the device being paired to the APX12 GO BT, select the APX12 GO BT
speaker by selecting the device named “ APX12 GO BT.”
3. The APX12 GO BT will automatically pair wirelessly with your device.
TWS SET UP: This device’s True Wireless Stereo (TWS) capability allows
the user to pair the audio source wirelessly to two separate devices and
transmit separately to the left and right channels. To set up TWS, follow the
directions below:
1. Connect both speakers to power, and turn their power switches on.
2. Press the MODE button to activate Bluetooth on the speakers. “bt” will be
displayed on the screen.
3. Press the “TWS Stereo Link” button. The device will chime to indicate that
TWS has successfully been enabled.
FM RADIO PROGRAMMING
1. Find the row of buttons located below the display screen, and use the MODE
button to select FM radio mode.
2. Press the Play/Pause button (2nd button from the left) to scan for all
available FM radio stations.
3. Use the Skip Backward button (2nd button from the right) and the Skip
Forward button (rightmost button) to scroll through the stations that were
found in Step 2.
Please note: The speaker may not be able to pick up a particular FM radio
channel if the signal from the channel is too weak.
INSTALLATION
POLE MOUNTING
The APX12 GO BT is designed to accommodate a pole-mounted installation.
Use the two carry handles mounted located on both sides of the rear panel to carefully lift the speaker and lower it onto a compatible mounting device.
THE PRODUCT IS HEAVY! USE GOOD FORM WHEN LIFTING IN ORDER TO PREVENT INJURY! SEEK ASSISTANCE FROM ANOTHER PERSON IF NECESSARY!
Make sure that the mounting device inserts fully and securely into the pole mounting slot on the underside of the speaker.
Secure the speaker in place by tightening the mounting knob at the bottom of the backside of the speaker.
ENSURE THAT BOTH THE MOUNTING DEVICE AND THE MOUNTING SURFACE ARE STABLE! IF USING A COLLAPSIBLE TRIPOD, ENSURE THAT THE TRIPOD LEGS ARE DEPLOYED TO A STABLE POSITION! NEGLECTING TO DO SO MAY RESULT IN BODILY INJURY AND DAMAGE TO YOUR SPEAKER AND/OR MOUNTING DEVICE!
TECHNICAL SPECIFICATIONS
Speaker:
- 12″ Woofer with 1.5″ Voice Coil
- 1″ High-Frequency Driver
- 200 Watts Peak Power
- Class D Amplifiers with 65 Watts RMS
- Freq Response: 40Hz-18KHz
- Sensitivity: 93 +/- 2 dB
Features:
- Battery power up to 8 hours of use
- Battery life indicator
- wireless connectivity
- LCD display
- Plays MP3 files from USB or SD Card inputs
- FM tuner
- Includes retractable carrying handle and wheels
- Tripod mount on the bottom of the speaker
Input / Outputs:
- Inputs: XLR, 1/8-inch jack, RCA
- Output: XLR
- Mic Inputs: XLR or ¼-inch
Rear Controls:
- MP3 Volume Control
- Microphone Volume Control
- Line Level Control
- Master Volume Control
- Treble Control
- Bass Control
Wireless Remote Controls:
- Play/Pause
- Volume Control
- EQ Control
- Mute
- Mode
- Previous / Next
Power:
- Switching AC Power Supply: AC115/230V
- Battery: 12V, 700mA
Dimensions / Weight:
-
Dimensions
– Length: 16.375″ (415mm)
– Width: 14″ (355mm)
– Height: 27.5″ (700mm) -
Weight: 35 lbs. / 16kg.
Includes:
- Power cord
- One wired UHF microphone
- Wireless remote control
Specifications may be subject to change without advance notice.
DIMENSIONAL DRAWINGS
The drawings shown may not be to scale.
SKU#: UPC#:
APX120 818651028034