idx Firmware Instruction Manual
- June 7, 2024
- idx
Table of Contents
idx Firmware
Firmware Update (Compatibility w/ IPL Series)
The new PowerLink technology in both IPL-98 & IPL-150 allows for up to four ba series to be stacked charged when used with the VL-2000S charger. To take advantage of this new feature, current owners of the VL-2000S charger will have to install the newest firmware.
- Update not required for serial numbers starting with VDXCA91.
Firmware Update Needed (Serial Number):
VDXCA81
A71
A61*****
Hardware Requirements:
– Windows PC with at least 1x USB port
– USB Flash Drive (blank)
Firmware Update Instruc on:
1. Download firmware (.zip) from the link provided.
2. Unzip and copy the 2 files to the root folder of the blank USB flash
drive.
3. Remove all ba series and the AC cable from the charger and wait for all
LEDs to turn off.
4. Insert the USB flash drive with the firmware into the USB port on the side
of the charger.
5. Plug in the AC cable.
6. The charger will boot up with all LED lit solid for 3 sec, and then will
blink during the install.
Do not remove the USB flash drive during installation (LED blinking)
7. A er a few seconds, LED will turn off, and then the install on is
complete.
8. VL-2000S can now stack charge!
For more information, please contact IDX customer service at 310-328-2850.
2377 Crenshaw Blvd., Suite 160
Torrance, CA 90501
t: 310-328-2850 f:
310-328-8202 e:
idx.usa@idx.tv