BRANDMOTION safer cars today Rear Camera Mirror System Installation Guide

FullVUE™ Rear Camera Mirror System

FVMR-1100

Recommended Tools

Wrench            Wire Strippers      Wire Cutters           Electrical Tape

Screw Driver          Panel Removal Tool      Zip Ties           Socket Set

Difficulty Level                             Install Time

            1hr 30m – 2hr

Product Features

3x Wider View        Unobstructed HD View      Eliminates Blind Spots

Full Touch Screen        Records as You Drive      Seamless Integration

Questions? Call the Brandmotion technical support line at 734-619-1250 or

AR_01_05_21 Installation Instructions – FullVUE™ Mirror   Page 1/8

Vehicle Application:
Jeep Wrangler JK
(MY 2009-2018)
Part Number: FVMR-8866V2

Kit Contents

Kit A                            Components for installing the FullVUE™ Mirror

x1 FullVue™ Mirror                             x1 Power Harness

Kit B                                    Components for installing the Rear Camera

x1 Rear Camera                                    x1 Video/Power Harness

AR_01_05_21 Installation Instructions – FullVUE™ Mirror   Page 2/8

Vehicle Application:
Universal
Part Number: FVMR-1000

Mirror Installation

Part 1               Attaching the FullVUE™ Mirror to the windsheild

1: Remove old mirror from mount on windshield as per manufacturer’s directions. Be sure to use the proper removal tool if required.

2: Install new mirror on to D-tab and tighten with a Phillips screwdriver.

    Take care not to overtighten. Overtightening could result in damaged windshield.

Part 2                                 Powering the FullVUE™ Mirror

1: Connect the power harness to the plug on the mirror. Route the harness across the head liner, down the the A-pillar, and to the desired location in kick panel.

2: Ensure that the harness will not be pinched when trim panels are replaced.

Part 3                                    Wiring the FullVUE™ Mirror 12V Constant, Ground, 12V Accessory

1: Connect the RED wire from the mirror harness to 12-volt accessory power.

2: Connect the BLACK wire to a solid ground. Chassis ground in kick panel is recommended.

3: Connect the YELLOW wire from the mirror harness to the 12-volt constant in the vehicle.

AR_01_05_21      Installation Instructions – FullVUE™ Mirror      Page 3/8

Vehicle Application:
Universal
Part Number: FVMR-1000

Mirror Installation

Part 4                             Function test of the FullVUE™ Mirror

1: Connect camera to camera harness and set aside.

2: Plug camera harness into mirror harness 5-Pin connector.

3: Test mirror and camera by turning on ignition power. You should be able to see both the front and rear camera after mirror powers up.

Install Review Installation of the FullVUE™ Mirror

Double check power connections

  Cycle power in mirror to test functionality

Secure foot of mirror onto windsheild

Ensure harness is not pinched by trim panels

Continue to Camerra Install

AR_01_05_21 Installation Instructions – FullVUE™ Mirror   Page 4/8

Vehicle Application:
Universal
Part Number: FVMR-1000

Camera Installation

Part 1                     Attaching the Rear Vision Camera

1: Mount rear camera to stable surface on rear of vehicle. Be sure to clean mounting surface with alcohol.

2: Camera can be effectively mounted in multiple locations depending on vehicle type. Be sure desired location is out of the way of any moving parts and that the camera is in the proper orientation.

Part 2                          Attaching the Rear Vision Camera Harness

1: Run Chassis harness along the headliner of the vehicle . Plug camera harness into mirror harness connector labeled “Camera” and route down A-pillar with power harness.

2: Connect the red wire behind the 4-Pin connector to reverse 12v+. When activated, the image will zoom out to show entire image with park line overlay

Install Review                 Installation of the Rear Vision Camera

Double check power connections

Check video to confirm camera orientation

If needed, seal body work with silicone

Shift into reverse to check reverse trigger

Continue to FullVUE™ Mirror Settings

AR_01_05_21 Installation Instructions – FullVUE™ Mirror   Page 5/8

Vehicle Application:
Jeep Wrangler JK
(MY 2009-2018)
Part Number: FVMR-8866V2

FullVUE™ Mirror Settings

FullVUE™ User Interface Guide Screen Capture, Start/Stop, Sound Recording On/Off, View, Lock, Menu, Change Camera Front/Rear

1. Touch screen once to bring up User Interface
2. Swipe finger left or right to switch camera views
3. Use +/- on left side of screen to adjust brightness
4. Use icons below for respective controls

FullVUE™ Settings                           Menu Item Instructions

Streaming Media
– Toggle Night Sight On/Off (Turn on under low light conditions for clearer image on mirror)
– Choose: Standard Video for regular use/Enhanced Video for crisp color/Evening Light for sunset or dusk lighting conditions

Protect Level
– Select sensitivity for auto locked event recording for DVR. When the G-Sensor feels shock, it will automatically lock the recording on the SD card for later use
– Choose: On / Off

Parking Monitoring
– Select On/Off for G-Sensor Initiated recording. These files will be auto locked and record for 1 min

Volume
– Adjust UI control and video playback volume

Clock Settings
– Set date and time for UI

LCD Power Save
– Select automatic screen save Off/1min/3min
– Screen will go black after 1 min or 3 min of no use, if selected

Format SD
– Format/Reformat Card. Be sure to save all wanted footage on another device before reformatting

Refresh Rate
– Adjust video frame rate 50Hz or 60hz (frames per second)
– This setting will change how smooth the video will play back and will affect LED headlight flicker. If headlights in mirror are flickering excessively, try changing this setting.

Factory Reset
– Reset all settings

AR_01_05_21 Installation Instructions – FullVUE™ Mirror   Page 6/8

Vehicle Application:
Jeep Wrangler JK
(MY 2009-2018)
Part Number: FVMR-8866V2

FullVUE™ Mirror Settings

FullVUE™ Settings                  Video Recording Menu Instructions

Normal Video
– This is where all general video recordings can be found. All files in this folder will be overwritten if SD card runs out of space. DVR will overwrite the oldest files first.

Lock Video
– Pushing the”Lock Recording” button on the main user interface (shown on page 3) will save the respective video in this folder. All files saved in this folder will not be overwritten, even if the SD card runs out of space.

Photo
-This folder will hold all screenshots taken using the”Screen Capture” button on the main user interface shown on page 3.

Front and Rear
– Front and Rear camera views are separated in each main folder. Use front or rear button to view recordings or photos of the desired camera view.

Protect and Unprotect
– These functions will not protect the video from being overwritten. Protecting a photo or recording means that if the”Delete All”function is used, the protected files will not be deleted. If you do not want to delete specific files, protect them and “Delete All” will delete all other files inside of the folder. See “Delete All”for functional details.

Delete
– This button will delete only individually selected files. If the file is protected, it will not delete that file.

Delete All
– The function will delete all unprotected files within a folder. It will not delete files in both front and rear. It will only delete files in the folder and camera view you have open.

– In other words, if you are viewing all files saved under Normal Video -Front and push “Delete All”, only front camera files will be deleted. Rear camera files will still be saved

Streaming Media, Protect Level, Pack Monitoring, Reversing Mode, Volume, Recording Time, Clock Settings, Language, LCD Power Save, Format SD, Refresh Rate, Factory Reset

Continue to FAQ Section

AR_01_05_21 Installation Instructions – FullVUE™ Mirror   Page 7/8

Vehicle Application:
Jeep Wrangler JK
(MY 2009-2018)
Part Number: FVMR-8866V2

FAQ Section

1. Can you flip the camera in the FullVUE Screen?
   At this time you cannot flip the image from the Fu11VUE™ camera. Please check back with our website for the latest information.

2. Can I turn the display off and use the FullVUE as a mirror?
   Yes! Simply tap the bottom button 1 time ( 2 times if you have the time stamp screen) and the mirror will function as a traditional mirror. As a bonus, if you have the reverse trigger wire hooked up, it will still show the image on the mirror even in the display off setting. When you shift the vehicle from reverse, it will return to the setting that was selected before shifting!

3. Can I use an auxiliary camera with the FullVUE mirror?
   At this time, you can only use the provided FullVUE™ Camera with the FullVUE™ Rear Camera Mirror. Please visit our website for new information.

4. My wire harness is a little short. Can I extend the wires?
   At this time you cannot extend the wires. We have tested up to 16.5 ft 4 pin cable extensions onto our 6 m harness. We do not recommend adding an extension to our 9 m harness at this time.

WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov

AR_01_05_21 Installation Instructions – FullVUE™ Mirror   Page 8/8

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>