pzelighting lamp Installation Guide

pzelighting lamp

Installation sequence

OFF
STEPS
Turn off the power

STEPS
1. Connect the power cord of the lamp body to the reserved Power cord, pay attention to the positive and negative poles
2. Turn on the power and check if the light is on. If there is No, please contact customer service.

STEPS
Lift the ceiling plate of the whole lamp to the hole of the hanging plate, and fix it with screws

STEPS
1. Take out the lampshade from the package
2. Slightly bend the lampshade inward with both hands and
put it into the lamp body

STEPS
The installation is complete

Warning:

1. Voltage: 95-265V ~ 50 / 60Hz

2. For indoor use only

3. Please, professional installation to avoid the risk of electric shock

4. Before installation, check whether the accessories are complete, If there is not enough, please contact customer service in time for replacement
   (E-mail: pzelighting@outlook.com)

5. Before installation, please cut off the power supply to prevent leakage

6. Please be sure to install according to the company’s installation instructions,

7. TEL:+8613129258998

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>