SQUEGG The Smart Squeeze Ball User Guide
- June 7, 2024
- SQUEGG
Table of Contents
Note: If your Squegg doesn’t vibrate after a few seconds, you may need to charge it. See page 5 for more instructions.
How to start Squegging
How to use the phone holder
You can: ****
1. Insert your finger inside the slot to secure your hold on your mobile
while you Squegg;
2. Turn your phone around in landscape orientation and use the holder as a
stand!
To charge your SQUEGG:
Connect the jack to the charging port of your Squegg – located on the side,
marked DC.
Push the jack into the port.
Make sure the jack is inserted securely and properly.
Your Squegg will vibrate once charging has started.
Charge for a minimum of 2 hours to 100%.
Standby time: 100 days
Continuous working hours: 80 hours
Troubleshooting guidelines:
– Make sure your mobile’s bluetooth function is switched on.
– Check if app is updated to the newest version.
– Charge your Squegg as it might be lacking battery charge. Upon connecting it
to the charger, squeeze the Squegg ball for 3 seconds and wait for it to
vibrate.
– While charging, if your battery is not showing charge, squeeze the Squegg
for 3 seconds and wait for it to vibrate.
– Everytime you open the app, squeeze your Squegg for 3 seconds and wait for
it to vibrate, or check if the Bluetooth symbol on the upper right side of the
app no longer has the rotating arrows around it.
– If you’re unable to connect, reset your Bluetooth by switching it off and
then turning it back on.
If none of the above works, please reach out to hello@mysquegg.com and provide the following details:
Built: iOS or Android
Application version:
Phone name:
Contact info:
If possible, share a video for the team to deep dive on the issue.
More videos:
bitly.mySOUEGG
#StartSqueggingNow
mysquegg.com
instagram.com/mysquegg
facebook.com/mysquegg
twitter.com/mysquegg
For any concerns, please email us at
hello@mysquegg.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>