FS-KBX102S Pv Accessories Revovalo Bat Balancer User Manual

FS-KBX102S Pv Accessories Revovalo Bat Balancer

PRODUCT USING INSTRUCTION

• What is the Battery Equalizer?
  • Battery equalizer is used to maintain the charge and discharge balance between each battery in the battery pack connected in series or parallel.
  • During the operation of the battery connected in series or parallel, due to the difference in the chemical composition and temperature of the battery cells, it will cause.
  • The charging and discharging ofthe two batteries will be different.
  • Even when the battery is idle, due to the different degrees of self-discharge, it will cause an imbalance between the batteries connected in series.
  • During the charging process, due to the difference, one battery will be overcharged Or discharged, while the other is not fully charged or discharged.
  • As the charge and discharge process is repeated, this difference will gradually intensify, eventually leading to premature battery failure.
• How Does the FS-KBX102S battery equalizer work?
  • FS-KBX102S battery equaliser is an energy transfer equalizer that can compensate the battery in both directions.
  • When the voltage difference between the batteries connected in series exceeds 50 millivolts, the battery equalizer starts to work, and the current will flow from the higher-voltage battery to the lower voltage.
  • The low battery will eventually balance the battery. It can be connected to the battery connected in series for a long time to automatically maintain the battery balance without maintenance.
  • FS-KBX102S battery equaliser is suitable for lead-acid batteries, Li-ion Battery batteries, Lithium iron phosphate Batteries,nickel-cadmium or nickel-hydrogen batteries.
  • It can work when the voltage is higher than 7V, that is, the battery equalizer can be used for batteries with a single battery in the range of 7V-18V, and any number of batteries can be connected in parallel or series.
  • The battery equalizer can be installed in multiple parallel connections and can be used with 48V60V 72V 96V 110V 220V 240V batteries.
  • Each battery equalizer corresponds to 2 batteries. Rail-type buckle installation can easily install the module inthe distribution box.
  • Two pairs of battery connection terminal wires and one pair of parallel wiring are included in theproduct package, which is convenient for customers to install quickly.

Before installing the Battery equalizer, please read the installation steps carefully to avoid damage to the device.

1. Before connecting the battery equalizer, please confirm the positive and negative poles of each battery to avoid short circuits and reverse connections between the battery equaliser terminals.
2. Please measure the voltages of the two batteries separately to ensure that the voltages ofthe two batteries are within the normal operating range.
3. Connect the battery equalizer B1+ and B1 – terminal to Bat-1, and set the battery type. Long press SET button 5s (pic1), then the B00 will flash. Press the set or dowm button and choose the correct battery model No(Default mode B03).  After the button is not operated for 5 seconds, the system automatically saves the battery voltage setting is completed, then connects the battery equalizer B2+ and B2-terminal to Bat-22. (pic.2)
4. If need to connect more batteries, you could make several battery equalizers (pic3). please connect the P1 and P2 terminals of two adjacent battery equalizers in parallel3. After completing the connection of multiple battery equalizer modules, you need to wait for several hours to achieve complete voltage balance among the battery equalizers.

Note:

1. Two batteries must be ofthe same type. The capacity of the new and old battery is different, which will affect the effect ofthe battery equalizer.
2. Each equalizer corresponds to two batteries.
3. Multiple battery equalizers can be used in parallel to solve the voltage balance of multiple batteries in the battery pack. In theory, countless batteries can be connected in parallel.

Battery Type Table

Default mode B03

Installation Wiring Diagram

1. 2PCS Batteries Connect
2. 4PCS Batteries Connect
3. 6PCS Batteries Connect
4. 8PCS Batteries Connect
5. 10PCS Batteries Connect
6. 12PCS Batteries Connect

Specification

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>