CORSAIR Performance Fans With Customizable Lighting Modes And Colors Installation Guide

: June 7, 2024
: Corsair

Table of Contents

**CORSAIR Performance Fans With Customizable
- Congratulations
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CORSAIR Performance Fans With Customizable Lighting Modes And Colors Installation Guide

**CORSAIR Performance Fans With Customizable

Lighting Modes And Colors**

Congratulations

The CORSAIR SP RGB series of fans gives you high performance and RGB LED lighting in one package.

SP RGB Kit Contents

SP RGB Kit Contents

COLOR
White
Red
Orange
Yellow
Green
Blue
Violet
W>R>O>Y>G>B>V
> Color Selection – White > Red > Orange > Yellow > Green >
Blue > Violet > Cycle through all colors > return to beginning.
MODE
Breathing & Flicker
Static
Breathing
Flicker
> Mode Selection – Breathing & Flicker > Static >
Breathing > Flicker > Return to beginning.
SPEED
High
Medium
Slow
> Speed Selection – High > Medium > Slow > Return to Beginning

Once all items are connected properly and powered on simply press the button of the corresponding option you would like to change once in order to move forward in the selection cycle.
The buttons are labeled on the fan controller itself.
a. Color = Color Selection
b. Mode = Mode selection
**c. Speed = Speed Selection

**

Installation

Connection Notes

The Fan LED wiring must be connected to the fan hub in the order you want the lighting effects to be displayed.
Fans must start at “1” and continue in series. 1 > 2 > 3 > 4 > 5 > 6
Any fan not connected in series will break communication and the RGB LED lighting function will not work.

Mount the fan(s) to the location of your choice in the chassis.
Find a location for the fan hub that allows connection for all of the fans RGB LED cables installed in your system to reach.
- The fan controller will also need to be plugged into the fan hub for control of the RGB LED lighting.
  
  Mount the fan hub with the provided mounting strips.

Installation Continued

Find a location for the RGB LED controller that allows the cable to reach the fan hub and gives you easy access to the buttons.
Mount the RGB LED controller with the provided mounting strip.
Plug in the 3 pin cable from the fan controller into the fan hub.
Plug in the SATA power cable from the fan hub into an unused
SATA power connector from the system PSU.
Plug the fan power cable into an unused fan port on your MB or fan controller.
- The fan power cable provides power.
- The RGB LED cable provides power and control for the RGB LED’s.
Both cables are required to be plugged into their respective ports in order for proper operation of the fan.

Optional Installation

An optional cable is supplied that allows connection to a pushbutton to operate the mode, color, and speed options from an external source.
Chassis buttons such as reset pushbutton or power pushbutton are examples of pushbutton that would work with the optional cable.
Connect the optional cable to the port on the top of the controller (the connector next to the “SP RGB Controller” on the fan controller.)