ZTE Blade A3 Lite User Guide
- June 7, 2024
- ZTE
Table of Contents
ZTE Blade A3 Lite
Quick Start Guide
LEGAL INFORMATION
Copyright © 2019TE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced, translated or used in
any form or by any means, electronic or mechanical, including photocopying and
microfilm, without the prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make modifications on print errors or
update specifications in this guide without prior notice.
We offer self-service for our smart terminal device users.
Please visit the ZTE official website (at
www.ztedevices.com) for more information on self-
service and supported product models. Information on the website takes
precedence. Visit http://www.ztedevices.com to download the user manual.
Just click Support from the home page and then select your location, product
type, and name to search for related support information.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and damages
caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the actual product.
Content in this guide may differ from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under
license.
microSDXC logo is a trademark of SD-3C, LLC. Other trademarks and trade names
are those of their respective owners.
Version No.: R1.0
Edition Time : January 25, 2019
Manual No.: 07958450xxxx
Getting to Know Your Phone
Installing the nano-SIM Card and the microSDXC™ Card (Optional)
The nano-SIM card can be installed or removed while the phone is turned on.
Power off your phone before removing or replacing the battery.
WARNING!
To avoid damage to the phone, do not use any other kind of SIM card, or any
non-standard nano-SIM card cut from a SIM card. You can get a standard nano-
SIM card from your service provider.
1. Place your finger into the slot at the bottom of the back cover, and
gently lift and remove the cover.
2. Install the nano-SIM card and the microSDXC card as shown.
3. Insert the battery, making sure the connectors align. Gently push down on the battery until it clicks into place.
4. Replace the back cover.
Charging the Phone
Your phone’s battery should have enough power for the phone to turn on, find a
signal, and make a few calls. You should fully charge the battery as soon as
possible.
WARNING!
Use only ZTE-approved chargers and USB cables. The use of unapproved
accessories could damage your phone or cause the battery to explode.
NOTE :
If the battery is extremely low, you may be unable to power on the phone even
when it is being charged. In this case, try again after charging the phone for
at least 20 minutes. Contact customer service if you still cannot power on the
phone after prolonged charging.
Product Safety Information
| Don’t make or receive phone calls while driving. Never text while driving.
---|---
| Keep your phone from your body while making calls.
| Small parts may cause choking.
| Your phone can produce a loud sound.
| To prevent possible hearing damage, do not listen at high volume levels for
long periods. Exercise caution when holding your phone near your ear while
the loudspeaker is in use.
| Avoid contact with anything magnetic.
| Keep away from pacemakers and other electronic medical devices.
| Turn off when asked to in hospitals and medical facilities.
| Turn off when told to on aircraft and at airports.
| Turn off when near explosive materials or liquids.
| Don’t use at gas stations.
| Your phone may produce a bright or flashing light.
| Don’t dispose of your phone in fire.
| Avoid extreme temperatures.
| Avoid contact with liquids. Keep your phone dry.
| Do not attempt to disassemble your phone.
| Only use approved accessories.
| Don’t rely on your phone as a primary device for emergency communications.
Please visit https://certification.zetdevices.com
and select your product type for more information on FCC RF Exposure
information and SAR value for this device.
SAR compliance for body-worn operation is based on a separation distance of 10
mm between the unit and the human body. Carry this device at least 10 mm away
from your body to ensure RF exposure level compliant or lower to the reported
level. To support body-worn operation, choose the belt clips or holsters,
which do not contain metallic components, to maintain a separation of 10 mm
between this device and your body.
RF exposure compliance with any body-worn accessory, which contains metal, was
not tested and certified, and using such body-worn accessory should be
avoided.
FCC Regulations
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CAUTION :
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>