FLAVOUR BLASTER Pro 2.4 Micro USB Cable User Manual

FLAVOUR BLASTER Pro 2.4 Micro USB Cable

CONGRATULATIONS

CONGRATULATIONS ON YOUR PURCHASE OF THIS FLAVOUR BLASTER PRO 2!
FOR THE BEST EXPERIENCE PLEASE CAREFULLY READ AND FOLLOW THIS USER MANUAL.

For the latest information and to be part of a great and growing community please join our Bubble Heads Club: https://www.flavourblaster.com/account/register.

IMPORTANT INFORMATION

ALWAYS STORE THE FLAVOUR BLASTER IN AN UPRIGHT POSITION: THIS WILL PREVENT ANY LIQUIDS FROM ENTERING INSIDE THE CASING.

POWERING THE FLAVOUR BLASTER ON & OFF:
Press the Trigger 3 times in quick succession to turn on the Flavour Blaster. Press the Trigger 3 times in quick succession to turn off the Flavour Blaster. Always power off the Flavour Blaster when it is not being used and remove the Tank.

8 SECOND CUT OFF:
If Trigger is pressed for 8 seconds Flavour Blaster will stop firing until Trigger is released and pressed again.

TANK:
Do not pour alcohol into the tank, this can cause fire. Tank / Coil will get hot during use so ensure Tank is allowed to cool down before removing Tank from Blaster.

SHIPPING & TRAVELLING:
Remove the Tank when shipping or travelling to prevent the Tank from activating if Flavour Blaster inadvertently turns on. Follow rules regarding shipping or travelling with a device with 2 permanently installed Lithium Ion Batteries. The Batteries are not removable or loose in the device.

SHORT CIRCUIT PROTECTION:
Short Circuit Protection prevents the Flavour Blaster from short-circuiting and will stop the unit from functioning in unsafe conditions. The Flavour Blaster features automatic real-time Tank Ohms detection.

OVERCHARGE PROTECTION:
Flavour Blaster monitors the battery voltage and will automatically power off when the battery is overcharged.

FLAVOUR BLASTER KIT INCLUDES

• 1x Flavour Blaster Pro 2
• 1x USB-C Cable
• 1x Reusable Tank
• 5x Tank Coil
• 5x Aroma
• 1x Bubble X
• 1x Bubble X Bowl
• 1x Atomiser

QUICK START

1. CHARGE BLASTER
   Insert USB-C Cable (See pages 6-7)

2. FILL TANK
   Pour Aroma into Tank (See pages 8-10)

3. INSERT TANK
   Insert Tank & add Nozzle

4. TURN ON
   Press Trigger 3 times

5. DIP NOZZLE
   Into Bubble X Jigger (See page 12 for bubble technique)

6. HOLD TRIGGER
   Creates Aroma-Filled Bubbles Double-click the trigger for clear bubbles .

BEST PRACTICE

1. STORE UPRIGHT
   Handle with care around liquids

2. ONLY DIP THE NOZZLE END
   Don’t dip the whole Nozzle into Bubble X

3. 3. DON’T TIP BACKWARDS
   To prevent liquids from leaking into Blaster

4. NO BUBBLE X IN THE TANK
   To prevent Tank damage & leaking

5. CLEANING
   Clean with an alcohol wipe after use

6. REMOVE THE TANK
   When not in use to prevent leaking

ATOMISER

Dry bar environments can sometimes be a challenge for the bubble. To improve it`s stability, we recommend using the Atomiser.

1. TWIST OPEN
   Twist the upper half of Atomiser to open

2. REMOVE THE INNER BOTTLE
   Remove the inner tube from Atomiser outer casing

3. FILL WITH WATER
   Unscrew the lid and fill container with water Screw the lid on and place it into the outer casing

4. SPRAY OVER DRINK/GLASS
   Increase bubble success rate by spraying cocktails/glassware 1/2 x with water

5. SPRAY OVER THE BUBBLE
   Spray over a bubble to further increase stability

6. TWIST CLOSED
   Twist the upper half in the opposite direction to close when not in use

BATTERY

To charge your Flavour Blaster Battery connect the correctly powered USB-C Cable to the USB-C Input Port. The Screen will show the Battery charge %. A full Battery charge will take 8 hours, giving the Flavour Blaster 8 hours of usage time.

PLEASE READ AND ADHERE TO THE FOLLOWING WARNINGS WHEN CHARGING YOUR DEVICE:

• Only charge the Flavour Blaster with a high-quality CE & UL Certified wall charger.
• Never charge a Battery that has been damaged or dropped.
• Never plug a Charger into a non-approved Mains Power Transformer.
• Do not overcharge, remove the USB-C Cable from the Flavour Blaster when complete to prolong battery life.
• Remove the Tank before charging.
• Never leave a charging battery unattended.
• Only use the included high-quality USB-C Charging Cable.
• Do not charge your Flavour Blaster in your car.
• Remove the Tank from the Flavour Blaster when shipping or travelling.
• If there are any issues with the device please contact JetChill immediately.

SCREEN

1. 100% BATTERY
2. 80% BATTERY
3. 60% BATTERY
4. 40% BATTERY
5. 10% (FLASHING)
6. NO BATTERY (PLUG IN USB-C)

FILL REUSABLE TANK

1. CHECK THE COIL
   Ensure Coil is screwed tight into the Base And 3x Rubber Seals are in place

2. PRIME COIL COTTON
   Allow a small amount of Aroma to absorb into the Coil of Cotton

3. FILL THE TANK
   Highly screw Tank parts together Pour Aroma into the Outer (not Inner) Hole

4. FILL LINE
   Fill to Min & rest for 2 minutes Then fill to Max & rest for 2 minutes

5. CONNECT THE TANK
   Ensure the Tank is not leaking Then connect to Mag Base

6. CHANGE THE COIL
   Recommended every 4 weeks

FILL DISPOSABLE TANK

1. OPEN FLAP
   Pull the Outer Hole Flap open

2. FILL TANK
   Pour Aroma into the Outer (Not Inner) Hole

3. FILL LINE
   Fill to Max then rest for 2 minutes

4. CONNECT TANK
   Connect to Mag Base

5. REPLACE TANK
   Every 8 Weeks Or once Aroma Cloud smells burnt

6. CLEANING
   Clean the Base with an alcohol wipe

CLEAN REUSABLE TANK

1. UNSCREW LID
2. PULL OFF THE GLASS COVER
3. UNSCREW COIL
4. ALCOHOL WIPE PARTS (NOT COIL)
5. ALCOHOL WIPE TANK BASE
6. ALCOHOL WIPE MAG BASE

CLEAR BUBBLE

1. PRESS TRIGGER TWICE
2. DIP NOZZLE IN BUBBLE X
3. PULL TRIGGER
4. PRESS TRIGGER TWICE To produce Aroma again

BUBBLE TECHNIQUE

Create bubbles filled with aromatics, fill cloches with aromatic clouds, make your own aromatic clouds for cocktails & drinks, add theatrical clouds for desserts, and much more.

1. The bubble mixture should be shaken gently prior to use or every 24 hours

2. Bubbles can be created on both wet and dry rims. You can create a wet rim by rinsing the glass or by using a fine mist spray bottle like an atomiser. Sometimes bubbles are fragile so it’s always best to prepare the glass for the best chance of achieving the perfect bubble.

3. Carbonated drinks can occasionally pop your bubble as gas bubbles hit the rim of the glass, breaking the surface tension. Always leave a 2cm to 3cm gap between top of the drink and the rim. Note if alcohol is strong or neat, the bubble is harder to form, as the alcohol will evaporate the water in the film of the bubble.

4. Sharp glass edges, shaped glassware, plastic rim and drinks containing ice will be very difficult to form a bubble upon. We recommend using glassware with soft rolled edges.
   BUBBLE QUANTITIES

5. 180ml bottle of Bubble X makes 1000 bubbles.

6. 10ml bottle of Aroma makes 250 aroma clouds.

7. Glassware must be clean and washed correctly. Residue detergent from a glass washer may compromise the forming of the bubble.

8. Always try and keep the bubble mixture at 18c room temperature. If it gets too warm it can make it harder to form bubbles!

RGB

1. WHITE LED FLASHES
   • x3 Temperature too high
   • x4 Excess use a heat protection
   • x5 Power On/Off
2. RED LED FLASHES
   • x3 Tank not detected
   • x5 Battery wattage low
3. GREEN LED FLASHES
   • x3 Coil needs replacing
   • x5 Tank detected

WARNING
PLEASE READ THIS SECTION CAREFULLY TO ENSURE YOU RECEIVE MAXIMUM BENEFITS FROM YOUR FLAVOUR BLASTER PRO 2 AND ENJOY THE PRODUCT IN THE SAFEST EFFECTIVE WAY:

1. This Flavour Blaster is designed to be used with Flavour Blaster Aroma and Bubble X only. It is not designed to be used with any e-liquids or loose tobacco leaf or herbal substances!
2. This product is only intended for use by adults (18+) and should not be used by children, women who are pregnant or breastfeeding, or persons with or at risk of heart disease, high blood pressure, diabetes or taking medicine for depression or asthma, or who otherwise may be sensitive to Aromas. l.e. toxic by inhalation, in contact with the skin or eyes, or if swallowed. Ingestion of the non-vaporized concentrated Aroma ingredients can be poisonous. Keep away from children and pets.
3. The Flavour Blaster has not been evaluated by the FDA and is not intended to be a smoking device or treat, mitigate, prevent or cure any disease or condition.
4. The Tank & Coils must be stored out of the reach of children and pets. All spare and used Tanks and Coils must also be disposed of properly and out the reach of children and pets.
5. The Flavour Blaster includes small parts such as the Tank Coil. Always keep any small parts out of reach of children and pets to prevent swallowing or other harm.
6. Do not misuse, mishandle or store your Flavour Blaster improperly. Even though it is made of durable plastic and metal it may become damaged when dropped or otherwise mishandled.
7. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
8. In order to guarantee the normal functioning of your Flavour Blaster we strongly advise that you charge the battery when the power level drops below 10%.
9. In order to prolong the operation of your Flavour Blaster, please do not place or store in excessively hot or cold environments. Keep away from sources of excessive heat as damage may occur.
10. Obey local laws or regulations regarding Electronic Cigarettes when producing Aroma Clouds. If you are in an area where there are any bans or potential dangers, please do not use your Flavour Blaster.
11. Your Flavour Blaster is not waterproof, please keep it dry at all times, especially the USB-C Port.
12. Do not allow any Aroma, Bubble X, or liquid to enter the device through the USB-C port. If any liquids enter the device or come into contact with internal components, please discontinue using or charging the device and contact JetChill immediately.
13. Do not drop, throw, or mishandle your Flavour Blaster as the Casing or inner components may become damaged.
14. JetChill is not responsible for battery and charger explosions, or malfunctions, due to the use of a low-quality charger. Only use the original Flavour Blaster USB-C Cable to charge your Flavour Blaster. We strongly recommend that you always use a high-quality USB wall charger (CE & UL Certified). The Flavour Blaster is not designed for use with a car charger and the Kit does not include a car charger.
15. JetChill is not responsible for any tank or battery damage due to the use of e-liquid or dry herb.
16. Do not ingest Aroma direct from the Bottle. In case of Aroma contact with skin, wash immediately and thoroughly with soap and water. In case of contact with eyes, rinse immediately and thoroughly with water and seek full medical advice immediately. In case of an accident, or if you feel unwell, seek full medical advice.
17. Do not ingest Bubble X direct from the bottle. If swallowed, rinse your mouth immediately with plenty of water and drink a glass of water. Do not induce vomiting. Rinse off the skin and eyes immediately should the liquid come into contact with them.

TECHNICAL SPECIFICATIONS

• Battery (Lithium Ion): 5,000 mAh, 2x 3.6 V (INR18650–30Q )
• Output Power: 30 W
• Output Voltage: 2.99–3.7 V
• Output Current (continuous): 4.0-10.0 A
• A t o m i z e r R e s i s t a n c e ( c o l d ) : 0.1–1.2 Ohm
• Temperature Limit: 200–600 oF
• Input Voltage (unloaded): 5 V 1 A
• Input Current: 8.0–10.0 A
• Screen On Current: ＜20 mA
• Quiescent Current: ＜50 mA
• Power Down Current: 32-106 uA
• Efficiency: 90%

WARRANTY INFORMATION

• JetChill provides a 12-month warranty on parts and labour for the Flavour Blaster.
• Please consult www.flavourblaster.com for full terms and conditions.
• For warranty assessment the Flavour Blaster needs to be returned to the factory please contact info@jetchill.com as the first step. Empty the Tank before shipping and ensure.
• Tank is not connected to the Mag Base.

www.flavourblaster.com www.jetchill.com info@jetchill.com. 00 44 (0) 208 1243014.

References

• Jetchill Dry Ice Drinks Smoking Drinks
• Create Account – Flavour Blaster

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>