Panasonic Energy Recovery Ventilator Filter Replacing Instructions
- June 7, 2024
- Panasonic
Table of Contents
Energy Recovery Ventilator Filter Replacing Instructions
OA filter
Model No. FV-FL0810VE1 FV-FL1310VE1
- Before replacing filters, please read the “MAINTENANCE” section of installation and operating instructions.
- It is suggested to replace the OA filter on every 6 months.
Method for replacing filter
WARNING
Electric shock may result. Disconnect power by switching off wall switch
first, then main switch, and unplug the power plug before working on unit.
There may be dew in ERV after running long time in cold climate, please remove
the 4 plugs on frame cover to discharge dew water befroe open the frame cover.
(Fig.1)
-
Open the frame cover by unlocking the latches. (Fig.2)
(1) If not convenient for maintenance, you also can turn the lock plate up to 90° and remove the frame cover. (Fig.3)
(2) There is a
spring (Fig.3) on the inside of frame cover, please do not damage or deform
it, otherwise, the ERV may can not operate. -
Remove OA filter. (Fig.4)
-
Install new OA filter. (Fig.5) Make sure the direction of arrow on OA filter should be same with air flow direction that display on the nearby label.
-
Install and close frame cover by locking the latches, then reset the lock plate. (Fig.6)
-
Connect power, press filter reset button with sound of “Pi -”, then filter indicator and buzzer sound will be off. (Fig.7)
PRODUCT SERVICE
Warning Concerning Removal of Covers. The unit should be serviced by qualified technicians only. Your product is designed and manufactured to ensure a minimum of maintenance. Should your unit require service or parts, call Panasonic Call Center at 1-866-292-7299 (USA) or 1-800-669-5165 (Canada).
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102
www.panasonic.com
©Panasonic Corporation 2016
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.com
Printed in China
Printed in China
Issue date:11/2016
P1116-0 FL0810421