deconn Fiber Optic 4K HDMI Cable Instruction Manual
- June 7, 2024
- deconn
Table of Contents
deconn Fiber Optic 4K HDMI Cable Instruction Manual
Questions And Answers
Q 1: What is the difference between a fiber-optic HDMI AOC CABLE and a
traditional HDMI copper cable
Ans: fiber-optic HDMI AOC CABLE basically does not attenuate, so the signal is
more stable and transmitted further. 60% less copper than copper wire.
Q. 2: How to achieve a standard HDMI2.0 4K 18G transmission effect,
Confirmation of output and input devices
Ans: Resolution 3840×2160, Refresh rate 60Hz, Ycbcr:4:4:4, Deep Color:8bit,
Bandwidth: 17.82G Resolution 3840×2160, Refresh rate 60Hz, Ycbcr:4:2:2, Deep
Color:12bit, Bandwidth: 17.82G Resolution 3840×2160, Refresh rate 60Hz,
Ycbcr:4:2:0, Deep Color:16bit, Bandwidth: 17.82G
Q. 3: How to properly connect fiber HDMI AOC CABLE
Ans: Refer to the connection direction of the above figure
Q 4: HDMI AOC CABLE for bending radius, stampede, winding and other
requirements during use
Ans: refer to illustration 4 above.
Q 5: When the HDMI AOC CABLE connects both ends of the device, no signal
output, and the device does not work
Ans: 1. Ensure proper connection to this connection line 2. Ensure that both
ends of the equipment are working
Q 6: When the HDMI AOC CABLE is connected to a transit device (switch,
distributor, amplifier), there is no signal output
Ans: 1. Does the transit device support resolution for both ends of the
device, and if it is not supported, it cannot play back 2. If the direct-
plugged fiber HDMI AOC Cable works, if it works, it means that my cable is
good.
Q 7: Can you get a 1080p HD signal instead of a 4K UHD signal
Ans: Check that your output and input devices support 4K
Q 8: When the HDMI AOC CABLE connects both devices and does not support 4:4:4
video format
Ans: Check that your output and input devices support 4K 4:4:4.
Q 9: When the HDMI AOC CABLE is connected to both devices and an intermittent
flash screen appears
Ans: Check to see if the cable is loose or that you have problem
Q 10: When the HDMI AOC CABLE connects the devices at both ends and the screen
appears?
Ans: check to see if the cable is loose or that you have problem
Q 11. When HDMI AOC CABLE connects devices at both ends, SDR and HDR10
switching are abnormal?
Ans: This connection cable supports HDR10, you can try reseating this
connection cable
Q 12: When the HDMI AOC CABLE connects devices at both ends, image and sound
jitter
Ans: Check to see if the cable is loose or that you have problem
Q 13.When the HDCP handshake protocol fails when the HDMI AOC CABLE connects
to both devices
Ans: This connection cable is supported by HDCP1.4 and HDCP2.2, can try to
reseat this connection cable
Q 14: When connecting power amplifier devices without audio output
Ans: Check if you plug in the ARC interface of the display device. Some
devices or interfaces do not support of the ARC
Q 15: When connecting the power amplifier device and turning off the display
device, the power amplifier also turns off at the same time
Ans: Need to debug your display device, turn off the CEC function
- If the above has not solved your problem, please contact our customer service E-Mail:vicky@deconncable.com
- There is no guarantee that all equipment will work. Some devices may not work
Security considerations
- Do not bring strong vibration and shock to this product, do not bring harm to this product. ¸This product shall not be used and kept in water or in places with water, direct sunlight, high temperature and humidity, dust or fumes, etc. ¸When reseating this product, you must have the necessary connector parts, reseat straight. Stretch the cable portion. Excessive force can lead to damage or failure. ¸Please don’t step on this product with furniture. Please do not let the child remove this product and accessories down ¸If the casing is damaged, the connector is rocking, etc., stop using the new cable. ¸This product should not be broken down, repaired, processed and modified. ¸The Company shall not be liable for direct or indirect damage to this product due to reason or its use. Please understand¸This product is for indoor use. Do not use it outdoors. This product is suitable for these purposes. If personal injury, social barriers, etc., the company will not be responsible.
https://www.cabledeconn.com
www.deconncable.com
Preface
Thank you for purchase. Please read this manual carefully before use. Please use it according to the content. Please keep this instruction after reading!
Product Description
This fiber optic HDMI cable can transmit the sound of the computer and laptop
HDMI interface to the TV, display and projector with HDMI interface, and the
resolution can reach 4K@60Hz.
The plug and play, without external power supply or signal amplifier, Support
HDCP2.2, CEC and EDID. Small barren waist streamlined metal shell, in line
with ergonomics. Fiber-optic transmission of high-frequency signals, no
electromagnetic interference. The outer diameter 4.7mm photoelectric composite
cable structure, the wire rod lig convenient engineering wiring.
Product Parameter
Model
Color| Black
Connector Type| Standard HDMI A Type plug
Highest bandwidth| 18Gbps (Single channel 6Gbps)
Resolution| 4K(3840×2160)@60Hz (Downward compatibility)
Conductor Material| Tinned Copper+Fiber
Shell Material:| Zinc Alloy
Shielding| Aluminum Foil + Metal Woven Mesh
Jacket Material| TPE
Length| 2M / 3M / 5M / 10M / 15M / 20M / 30M / 50M / 100M
Connection Direction
Source:Connect signal output device, such as Set top box, DVD, PC and Game
console.
Display: Connect signal input device; such as TV, Projector, Display.
Matters Need Attention
- When handling setting up, do not let the fiber-optic cable be affected by great impact and side pressure, so that the shell itself will be deformed, which may cause the fiber to be stuck when in use, and the resolution will be reduced. Or there may be the worst interruption. In addition, after construction wiring will also occur broken line, so need to pay attention.
- Check the appearance and performance of the optical fiber before installing the wiring. Please test the reconstruction on the equipment you need to use to avoid unnecessary trouble at the later stage.
- When wiring, please be careful not to tie, or pull the fiber , or use feet and other heavy objects to press the fiber, the process of breaking through the wall should not be more than 200N, if the fiber is broken, or the core broken, the optical fiber can no longer be used.
- The optical fiber should have a small amount of surplus at the turning point, make a good drop bend at the corner, do not let the optical fiber touch sharp objects, the surplus optical fiber should be wound reasonably and beautiful, when winding the fiber, the force should be uniform, and the optical fiber should not be subjected to hard bending. So as not to damage the fiber.
- When moving, use a line card to be fixed firmly, one at a distance of 1: 15 meters, do not
stretch too much between fixed positions, leaving room for thermal expansion and cold shrinkage, and in addition, in order to prevent damage to the optical fiber in the vertical alignment, stick tape between fixed line cards once.
To prevent deterioration and breaking of the internal fiber, always ensure minimum bending semicircle. When laying, because you pull the cable, pay attention to torsion and tension to ensure that the bending radius is above 40mm.
Be careful not to twist the cable and do not apply tension on the internal
fibre Channel while loosening the cable.
When laying the cable, pay attention to the angle of the machine, etc., be careful not to touch the sharp angle of the machine and equipment.
The HDMI connector cannot be suspended, the connector’s junction will be deformed, and the internal fiber may be disconnected.
Note: When reseating the HDMI connector. When inserting or removing the
connector, gently insert it with the connector part. If tension or force is
applied, it may lead to breakage, broken wires, faults.
When handling excess cables, follow the circle winding above the diameter of 80mm and do not apply pressure to the connector junction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>