JBC TMS-A ESD Table Mat Instruction Manual

JBC TMS-A ESD Table Mat

Product Usage Instructions

Application

To equip an Electrostatic Protected Area (EPA) workplace, follow these steps:

1. Place the ESD table mat on the workplace surface.
2. Connect the ESD table mat to other ESD components like the ESD earthing cable, earthing wristband, and earthing plug for a complete grounding system.

Work Place Connection Example

• JBC’s ESD table mat can be connected to other ESD components as shown below:

Maintenance

• Regularly clean the ESD table mat surface with mild detergent and water to maintain its effectiveness in dissipating static charges.

FAQ

• Q: Can the ESD table mat be used with non-ESD-certified equipment?
• A: It is recommended to use the ESD table mat with ESD-certified equipment to ensure proper protection against electrostatic discharge.
• Q: How often should the ESD table mat be replaced?
• A: The ESD table mat should be replaced if it shows signs of damage or wear that may affect its ability to dissipate static charges effectively.

This manual corresponds to the following references:

• TMS-A (450 x 600 mm / 17.72 x 23.62 in)
• TMB-A (900 x 600 mm / 35.43 x 23.62 in)

Packing List

The following items are included:

Application

• To equip an EPA (Electrostatic Protected Area) workplace, it is necessary to place, among other items, an ESD table mat on the workplace.
• These components help to protect static-sensitive components from electrostatic discharge by dissipating charge from objects placed on their surface. This prevents sensitive components from being damaged by electrostatic discharges.

Features

• The table mat is heat-, solder-, oil- and chemical-resistant.
• It comes with an anti-reflective grey surface, a non-slipping bottom side and rounded corners.
• Each table mat is equipped with two ø10 mm press studs, any of which can be connected to an earthing connection or a grounded common point.

Work Place Connection Example

• JBC’s ESD table mat can be connected to other ESD components as shown in the picture below.
• The following matching accessories are sold separately: an ESD spiral earthing cable, an ESD earthing cable an ESD earthing wristband and an ESD earthing plug.

Specifications

TMS / TMB
ESD Table Mat

• Ref.: TMS-A (450x600mm / 17.72 x 23.62 in)
• Ref.: TMB-A (900x600mm / 35.43 x 23.62 in)
• Electrical resistance: 106 – 108 Ω
• Resistant to: Abrasion, heat, solder, chemicals and oil
• Connections: ø10 mm press stud (2x)
• Material: Permanently elastic 100% PVC-FREE and PHTHALATE-FREE Two-layered: dissipative and conductive RoHS compliant
• Surfaces: Top side: grey colour, anti-reflective Bottom side: black colour, non-slipping
• ESD certification according to: IEC 61340-5-1:2016, typical surface resistance Rpp (Point to Point) between 10E06-10E07 Ohm.
• Glow wire testing according to: IEC 60335-1:2010 (750°C for a duration of 30s.)
• Needle flame testing according to: IEC 60695-11-5 (Top and bottom side no flaming, no glowing for a duration of 30s)

TMS TMB

• Total Net Weight: 0.76 kg / 1.68 lb 1.6 kg / 3.53 lb
• Package Dimensions/Weight: 620 x 136 x 135 mm / 1.1 kg 620 x 136 x 135 mm / 1.9 kg (L x W x H) 24.41 x 5.35 x 5.31 in / 2.47 lb 24.4 x 5.35 x 5.3 in / 4.19 lb

Complies with CE standards. ESD Safe.

Warranty

• JBC’s 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
• The warranty does not cover product wear or misuse.
• In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.

This product should not be thrown in the garbage.
Following the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

www.jbctools.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>