EHQ POWER VDLLPLx1 User Manual

June 7, 2024
EHQ POWER

EHQ POWER VDLLPLx1 User Manual

EHQ POWER VDLLPLx1 User Manual EHQ POWER
VDLLPLx1

VDLLPLx1

EHQ POWER VDLLPLx1 - Overview

Introduction

To all residents of the European Union
Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing HQPowerTM! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don’t install or use it and contact your dealer.

Safety Instructions

EHQ POWER VDLLPLx1 - Safety Instructions

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

EHQ POWER VDLLPLx1 - General Guidelines

  • Familiarise yourself with the functions of the device before actually using it.
  • All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
  • Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
  • Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
  • Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device against damage by leaving it switched off until it has reached room temperature.
  • Keep this manual for future reference.

Features

  • 9 segments of 12 LEDs each
  • very low power consumption

Overview

Refer to the illustration on page 2 of this manual.

  1. coloured dome
  2. power input
  3. speed adjustment
  4. mounting bracket

Installation

Safety

  • Before mounting the product, read and follow the safety recommendations indicated in the Safety Instructions.

Installation

  • The carrying construction must be able to support 10 times the weight of the device for 1 hour without deforming.
  • Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified technician check the device once a year and once before you bring it into service.
  • Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
  • Make sure there is no flammable material within a 0.5 m radius of the device.

Operation

Do not use the device when damage to housing or cables is noticed. Do not attempt to service the device yourself but contact an authorised dealer.

  1. Insert the plug of the included power supply into the power input [2] located on the base of the warning light. The warning light will switch on automatically.
  2. Adjust the rotation speed with the speed adjustment knob [3]. Turn left to decrease or right to increase.
  3. Disconnect the power source after use.

Cleaning and Maintenance

Before starting any cleaning or maintenance activities:

  1. Disconnect from the power source.
  2. Let the device cool down.

Cleaning

  • Clean the warning light with a soft cloth.
  • Always be sure to dry all parts completely before plugging the unit back in.
  • Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue, dust, dew).
  • Do not immerse the device in any liquid.

Maintenance

  • All screws should be tightened and free of corrosion.
  • The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting supports, do not change the location of the connections…
  • There are no user-serviceable parts.
  • Refer to an authorized dealer for service and/or spare parts.

Technical Specifications

EHQ POWER VDLLPLx1 - Technical Specifications

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.hqpower.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries.

All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for EU):

  • All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.

  • Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.
    You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

  • Not covered by warranty:

    • all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
    • consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
    • flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
    • flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
    • damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
    • damage resulting from an inappropriate packing and shipping of the article;
    • all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
  • Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.

  • Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.

  • Repairs occurring after warranty expiration are subject to shipping costs.

  • The above conditions are without prejudice to all commercial warranties.

The above enumeration is subject to modification according to the article (see article’s manual).

Made in PRC
Imported by Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.velleman.eu

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals