electriQ 27” Slim Led Monitor User Manual

: June 7, 2024
: ElectriQ

electriQ 27” Slim Led Monitor

product

SAFETY INFORMATION

Read these instructions – All the safety and operating instructions should be read before this product is operated.
Keep these instructions – The safety and operating instructions should be retained for future reference.
Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions – All operating and usage instructions should be followed.
Do not use this equipment near water, or in humid environments – The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool.
Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.
Do not block any ventilation openings.
Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat.
Do not tamper with the supplied plug. This plug is a BS1363 standard plug.
Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped.
Please keep the unit in a well-ventilated environment.
The monitor should only be connected to a mains power supply as rated on the back of the equipment.
To prevent overload, do not share the same power supply socket with too many other electronic components.
Do not place any connecting wires where they may be stepped on or tripped over.
Do not place heavy items on the cable as this may cause damage.
When removing from a socket hold by the plug and not the wires.
Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the unit does not work normally.
Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus.
Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components.
Due to our continuous product development, the operation and or features of the product received may vary slightly from the information provided within the manual.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus.
WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible.
WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire.

WHAT’S INCLUDED

CONNECTIONS AVAILABLE ON THE MONITOR

HDMI port: Used to connect a compatible device. Supports HDMI 1.4 & 2.0;
VGA: The VGA Input Source.
Audio Output Port: Used for connecting headphones, or external speakers
DC input port: Connect the supplied power supply to power the monitor

WALL MOUNTING

The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied)
The VESA mounting pattern is: 100x100mm and the size of the screws is 4 x M6 x 10 (not supplied)
Do not use screws longer than specified or damage will occur to the internal components.
NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to perform the installation

GETTING STARTED

MONITOR CONTROLS

M: Enter into OSD menu and select an item for confirming settings
◀: Move down/ reduce value in the OSD menu; Display HDR Menu
▶: Move up / reduce value in the OSD menu; Display LOS (Crosshairs)
E: Go back to previous menu, exit the on-screen display, and display source menu.
POWER: Turn the monitor on and off.

INITIAL SETUP

Connect the monitor to a power outlet.

Press the POWER button on the monitor or to turn it on (The indicator will be blue)
Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected.
To change between inputs, press the “E” button to enter the source menu. Use the “◀” and “▶” buttons to choose the input source between VGA and HDMI

The menu for the monitor can be accessed by pressing the “M” button on the control panel. This menu is separated into the following sub menus: Picture Settings, Image Settings, Colour Temperature, OSD Settings, Reset, and Miscellaneous options, details of each menu can be found in the following section

BRIGHTNESS SETTINGS

BRIGHTNESS
Allows the adjustment of the image brightness, according to ambient light in the room. Value “0-100”
CONTRAST
Allows the adjustment of contrast between white and black areas of the image. Value “0-100”
ECO MODE
Allows selection of image settings between the following: STANDARD, TEXT, MOVIE, and GAME, FPS, RTS”.
DCR
Allows the dynamic contrast of the picture to be turned ON and OFF

IMAGE SETUP SETTINGS

H. POSITION
Allows adjustment of the horizontal position of the display image. Use the “◀” and “▶” buttons to horizontally move the image.
V. POSITION
Allows adjustment of the vertical position of the display image. Use the “◀” and “▶” buttons to vertically move the image.
CLOCK
Allows adjustment of the CLOCK setting. Value “0-100”
PHASE
Can reduce video distortion and instability. Value”0-100″
IMAGERATIO
Allows the Image Ratio of the picture to be turned ON and OFF.

COLOUR SETUP SETTINGS

COLOR TEMP.
Allows adjustment of the colour settings between the following options: “Warm-5800-SRGB-User-Cool-7500”.
RED
Allows adjustment of the red element of color for the image
GREEN
Allows adjustment of the green element of color for the image
BLUE
Allows adjustment of the blue element of color for the image

OSD SETUP SETTING

LANGUAGE
Allows selection of desired language: “ENGLISH, FRENCH, TURKISH, ITALIAN, SPANISH, PORTUGUESE, CHINESE, GERMAN, JAPANESE, POLISH, KOREAN AND DUTCH”.
H. POSITION
Allows adjustment of the horizontal position of the OSD
V.POSITION
Allows adjustment of the vertical position of the OSD
TIMEOUT
Allows adjustment of the duration of the OSD, value “0-60”
TRANSPARENCE
Allows adjustment of the transparency of the OSD, value “0-100”.

RESET

AUTO CONFIG.
Auto adjusts the image.
AUTO COLOR
Auto adjusts the colour of the image.
RESET
Returns the monitor to its factory default settings

EXTRA

INPUT SELECT
Allows user to choose the signal source of the display “HDMI, VGA”.
MUTE
Allows Mute to be turned ON and OFF
VOLUME
Allows adjustment of the volume of the monitor from “0-100”.

SPECIFICATION

eiQ-27MF75I

Panel Type| 27”
Case Type| Plastic
Best Resolution| 1920(H) x 1080(V)
Active Display Area| 597.8 (H) X 336.3 (V)
Pixel Pitch| 0.3114 (H) x 0.3114 (V)
Contrast Ratio| 1000:1 Typical
Brightness| 250 cd/m²
Response Time| 5ms(G2G)
Viewing Angle| U/D: 89° / 89°, L /R: 89° / 89°
Display Colours| 16.7M
Adjustable Colour Temperature| WARM/ COOL /USER
Video Compatibility| Multi-Standard for NTSC / PAL
Aspect Ratio| 16: 9
Speaker Multimedia Speakers| Right x 1 Left x 1, 2X3W
Sound Demodulation| Stereo. Audio
Mute| Yes
Operating Humidity| 20 % – 70 %
Operating Temperature| – 10 to 50 °C
IN/OUT INTERFACE
Video Interface| HDMI + VGA
Audio Interface| Audio Inx 1
Safety & EMC Certification| CE / FCC / ROHS
Stand Type| Desktop
Button Position| Right Hand Side
POWER Voltage| DC12V / 3A
Power Consumption| ≤25W
Problem| Solution
---|---
No power| Insert the plug securely into the power outlet.

No picture

| Ensure that the equipment is connected properly.
Ensure the correct input is selected.
Buttons on the monitor don’t do

anything

| Disconnect the power plug and then reconnect it. (The unit may not be operating properly due to lightning, static, or other factors.)
Noise or other interference| ****

Electronic equipment near the unit may be causing interference. Relocate the unit or move the equipment.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice

electriQ UK SUPPORT

www.electriQ.co.uk/support
If the unit fails to operate call: 0871 620 1057 or complete the online form Office hours: 9AM – 5PM Monday to Friday
www.electriQ.co.uk
Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA