SteelSeries Prime Mouse Removable Cable User Guide
- June 7, 2024
- SteelSeries
Table of Contents
SteelSeries Prime Mouse Removable Cable User Guide
PRIMED FOR VICTORY
Your new mouse is the result of our unyielding pursuit of perfection for over 15 years. We poured our hearts into creating the best possible gaming mouse by pushing the boundaries of performance through precision, comfort, and durability. The Prime is our glory, now go chase yours.
STEEL SERIES ENGINE
To enjoy GameSense Integration, custom lighting effects, customization of mouse settings, as well as programming macros on your new Prime mouse, download SteelSeries Engine at steelseries.com/engine
PACKAGE CONTENTS
- Prime Mouse
- Removable Cable
- Product Information Guide
SYSTEM REQUIREMENTS // COMPATIBILITY
- PC
- Mac
- Xbox
SOFTWARE REQUIREMENTS
- Platforms
- Windows 7+
- Mac OS X 10.13+
- 140 MB of free hard drive space for installation
PRODUCT OVERVIEW
-
Split Trigger Design
Main Mouse Buttons -
Scroll Wheel
-
Side Buttons
-
Removable Cable
-
PTFE Feet
-
CPI Button
-
TrueMove Pro Sensor
Find accessories and replacement parts at steelseries.com/gaming- accessories
SETUP
Find help at support.steelseries.com
CPI BUTTON FUNCTIONS
POLLING RATE
FACTORY RESET
REGULATORY
Europe – EU Declaration of Conformity
Hereby, SteelSeries ApS. declares that the equipment which is compliance with
directive RoHS 2.0 (2015/863/EU), EMC Directive (2014/30/EU), and LVD
(2014/35/EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the
following internet address: https://steelseries.com/
Operating Temperature: 0 to + 40 °C
SteelSeries ApS. hereby confirms, to date, based on the feedback from our
suppliers indicates that our products shipping to the EU territory comply with
REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals –
(EC) 1907/2006) compliance program. We are fully committed to offering REACH
compliance on the products and posting accurate REACH compliance status for
the all of products.
WEEE
This product must not be disposed of with your other household waste or treat
them in compliance with the local regulations or contact your local city
office, your household waste disposal service or the shop where you purchased
the product.
This product is compliant with requirements of Vietnam Circular No. 30/2011 /TT-BCT Regulations “STIPULATING TEMPORARILY THE PERMISSIBLE CONTENT LIMITATION OF SOME TOXIC CHEMICALS IN THE ELECTRONIC, ELECTRICAL PRODUCTS”
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Statement:
This device complies with RSS standards of the Industry Canada Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
SteelSeries Products and Australian Consumer Law
Our goods come with guarantees that cannot be excluded under Australian
consumer law. You are entitled to a repair, replacement, or refund for a major
failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major
failure.
Should your product be defective, you can make a claim under Australian consumer law.
Summary of Australian statutory consumer guarantees
Consumer guarantees in relation to goods
The goods will be of acceptable quality, The goods will be fit for a
particular purpose, The goods will match their description, The goods will
match the sample or demonstration model, You have title to the goods, You have
undisturbed possession of the goods, There are no undisclosed securities on
the goods.
Consumer guarantees in relation to services
We will provide the services with due care and skill, The services will be fit
for a particular purpose, The services will be provided within a reasonable
time.
For SteelSeries-branded goods, in addition to the above, we also guarantee that we will provide repairs or spare parts for a reasonable time. Under Australian consumer law, the remedy you are entitled to if a product fails to meet a consumer guarantee will depend on whether the failure to comply with the guarantee is major or minor.
Minor failures to comply with a consumer guarantee can normally be fixed or resolved in a reasonable amount of time. In this case, the seller can choose to offer you a refund, replacement, repair or, in the case of services, resupply. If the seller does not fix the problem or takes too long, you may be able to get it fixed by someone else and recover the costs from the seller depending on the circumstances.
Remedies for major failure with goods
Return the product and ask for a refund, Return the product and ask for an
identical replacement, or one of similar value if reasonably available, Keep
the product and ask for compensation for the drop in value caused by the
problem.
Remedies for major failure with services
Cancel the contract and pay a reasonable amount for the work done, or seek a
refund, For money already paid, keep the contract and negotiate a reduced
price for the drop in value of the service — this may mean asking for some of
your money back if you have already paid.
For goods, there is a major failure to comply with a consumer guarantee when:
- You would not have purchased the product if you had known about the problem.
- The product is significantly different from the description, sample or demonstration model you were shown.
- The product is substantially unfit for its normal purpose and cannot easily be made fit within a reasonable time.
- The product is substantially unfit for a purpose that you told the supplier about, and cannot easily be made fit within a reasonable time.
- The product is unsafe.
For services, there is a major failure to comply with a consumer guarantee when:
- You would not have engaged the service if you had known the nature and extent of the problem.
- The service does not meet the reasonable expectations for that type of service, and the problem cannot be rectified within a reasonable time.
- You told the supplier that you wanted the service for a specific purpose, which was not fulfilled, and the problem could not be easily rectified within a reasonable time.
- You told the supplier that you wanted a specific result, yet the service and end result failed to meet your specifications and could not be easily rectified within a reasonable time.
- The supply of the service has created an unsafe situation.
For information on Australian consumer laws, please visit Australian consumer
law website at http://www.consumerlaw.gov.au
Importer Name and Address: Ingram Micro Pty LTD / Level1, 61 Dunning
Avenue. Rosebery NSW 2018
Telephone technical support: +61-2-9381-6000
The RoHS test method is based on the standards JIS C 0950 and CNS 15663
Note 1 :“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3: The “−” indicates that the restricted substance corresponds to the exemption
learn more at steelseries.com
References
- Home | Consumer Law
- Official Site - For Glory | SteelSeries
- Official Site - For Glory | SteelSeries
- Engine | SteelSeries
- Gaming Accessories | SteelSeries
- Official Site - For Glory | SteelSeries
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>