MPOW Wireless Earphone User Manual
- June 7, 2024
- MPow
Table of Contents
USER MANUAL
Wireless Earphone
DIAGRAM
- Speaker
- Eartip
- Mic
- Multifunctional Buttom(MFB)
- LED indicator
- Vol +/-
- USB charging dock
PACKING LIST
Earphone X1
Eartip X3
Ear Hook X1
USB Charging Cable X1
User Manual X1
Portable Bag X1
SPECIFICATION
| Operation Range | 10m |
|---|---|
| Talking Time | Up to 12 hours |
| Playing Time | Up to 15 hours |
| Charging Time | About 1.5 hours |
| Battery Capacity | 3.7V/ 210mAh |
| Charging Voltage | DC5V 1A |
Note: The actual time may vary from mobile phone types and functions.
OPERATION GUIDE
Power On/Off
Power On: Long press and hold the MFB for 2 seconds and the voice prompt
will be heard.
Power Off: Long press and hold the MFB for 3 seconds and the voice prompt
will be heard.
Search Pairing (the first time to use)
- Long press the MFB for 5 seconds in power-off mode, the red and blue indicator lights will flash alternately. (The earphone automatically enters the pairing state after startup.)
- Turn on the Bluetooth function on your cellphone, search “Mpow EM10” and click it to connect (If ask for passkey, please enter “0000”).
- If pairing is successful, you will hear an indication voice “connected”.
Connection with Two Mobile Phones
- Pair the earphone with the first phone.
- After the successful pairing, turn off the earphone and the Bluetooth function of the first phone;
- Pair the Bluetooth earphone to the second phone as the above steps.
- After the successful pairing, turn on the Bluetooth function of the first phone, select “Mpow EM10” to connect;
- When the above operations are successful, two phones will both be connected to the earphone at the same time.
Call
Answer/end a call: Short press the MFB to receive the phone call, press it
again to end the phone call.
Reject a call: Long press the MFB for 2 seconds to reject the incoming
call.
Redial: Double press the MFB to redial the last number you called on your
phone in the connection state.
Voice dialing: Long press the MFB for 1-2 seconds in the connection
state.
Music
Play/Pause: Short press the MFB
Next Song/Previous song: Long press the Vol +. Button to play.
next song in music mode; Long press the Vol -. Button to play the previous
song in music mode.
Vol +/-: Short press the Vol +. Button to increase the volume; Short
press the Vol -. Button to decrease the volume.
Earphone Charging
This headphone is equipped with a built-in non-detachable and rechargeable
lithium battery. Please make sure that the battery is charged fully for the
first time.
The red indicator light is always on when charging; the blue indicator light
remains lit when fully charged.
Factory Setting
Hold MFB for 5s until red and blue flash alternately 3 times during charging.
Bluetooth Indicator Status & Voice Prompt
| Work Status | Indicator Light Status | Voice Prompt |
|---|---|---|
| Power On | Blue indicator light flashes for 1 second | Power on |
| Power Off | Red indicator light flashes for 1 second | Power off |
| Pairing Mode | Red &blue light flashes fast alternately | Pairing |
| Connected | Blue indicator light flashes for 1 second | Connected |
| Low Battery Warning | A red indicator will flash every 8 seconds when the | |
| battery is low | Battery Low |
FCC STATEMENT：
Operation is subject to the following three conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
(3) This device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>