MPOW Tws In-Ear Earbuds User Manual
- June 7, 2024
- MPow
Table of Contents
MPOW Tws In-Ear Earbuds
PACKING LIST
DIAGRAM
POWER ON
Mode 1
Mode 2
- Take 2 earphones out of the charging case, they turn on automatically and enter the pairing mode.
- In the shutdown status, and when the earphones are not in the charging case, long press the multi-function button on the Right and Left earphones for 1s to power on.
POWER OFF
Mode 1
Mode 2
- Put the earphones back in the charging case, and they’ll shut down automatically.
- If do not put the earphones back in the case, just keep pressing the multi-function button for 8-9s on the R/L earphone to power off.
PAIRING
Mode 1
Mode 2
- Take out 2 earphones, they will automatically enter the pairing mode and then select “Mpow T5”.
- Turn it on by pressing and holding ”L” & “R” earphones simultaneously for 1s, then press and hold the “R” earphone for 3s to enter into pairing mode. Next, select “Mpow T5”on your phone.
Note: If your earbuds are pairing with phone A, you have to turn off phone A’s Bluetooth and do this to pair with phone B.
MUSIC
-
Volume Up/Down
Double click the multi-function button on the R/L earphone. -
Next/ Previous Track
Long press the multi-function button for 1s on the R/L earphone. -
Play/Pause
Click the multi-function button on the Right or Left earphone once
INCOMING CALL
-
Answer/Hang up
Click the multi-function button on the Right or Left earphone once -
Reject
Long press the multi-function button on the Right or Left earphone for 1s -
SIRI
Press the multi-function button on the Right earphone 3 times.
RESET
In the state of charging, simultaneously press and hold both MFB buttons for
10s.
Charging
Correct Disposal of This Product
( Waste Electrical& Electronic Equipment ) This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.
FCC Statement
Operation is subject to the following three conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
NOTE：
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>