BRONX Antique Faux Leather Barstool Instructions
- June 7, 2024
- BRONX
Table of Contents
BRONX ANTIQUE FAUX LEATHER BARSTOOL Assembly Instructions
Product Assistance Line: if you require any advice about this product or require any missing fixings, Please call 0800 083 35 73 between 9.00 am and 5.30 pm, Monday to Friday. If you are missing any of the components from the components list please contact JD Williams directly on 0871 231 2000. CAT NO.XK466
COMPONENT CHECKLIST
IMPORTANT: Read these instructions carefully before attempting to
assemble. Retain these instructions for future reference.
Health and safety
-
Assemble on a soft level surface to avoid damaging the unit or your floor.
-
This product should not be used if any parts are missing or broken.
-
All fixings should be checked and tightened before use and periodically tightened.
-
Do not stand on the unit.
-
Do not strike with a sharp implement.
-
Do not allow the product to become wet.
-
Always use on a level and even surface.
-
To ensure an easier assembly, we strongly advise that all fittings are the only finger tightened during initial
assembly. Only upon completion of the assembly should all fixing points be fully tightened. -
only trained personnel may replace or repair seat height adjustment components with energy accumulators.
How do I care for the Bronx antique faux leather barstool
- Wipe clean with a moist cloth
- Do not use abrasive cleaners.
Product Assistance Line: if you require any advice about this product or require any missing fixings, Please call 0800 083 35 73 between 9.00 am and 5.30 pm, Monday to Friday. If you are missing any of the components from the components list please contact JD Williams directly on 0871 231 2000. PO: 3198 CAT NO.XK466
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>